Article

Patil, N.A. and Pedapati, S.R. and Mamat, O. and Lubis, A.M.H.S. (2021) Morphological characterization, statistical modeling and wear behavior of AA7075-Titanium Carbide-Graphite surface composites via Friction stir processing. Journal of Materials Research and Technology, 11. pp. 2160-2180. ISSN 22387854

Yusoff, N.H.N. and Mamat, O. and Isa, M.C. (2019) Properties of electrodeposited nickel cobalt coated mild steel developed from alkaline bath. Defence S and T Technical Bulletin, 12 (1). pp. 150-160. ISSN 19856571

Majid, M.A.A. and Ya, H.H. and Mamat, O. and Mahadzir, S. (2019) Techno economic evaluation of cold energy from Malaysian liquefied natural gas regasification terminals. Energies, 12 (23). ISSN 19961073

Baig, Z. and Mamat, O. and Mustapha, M. and Mumtaz, A. and Munir, K.S. and Sarfraz, M. (2018) Investigation of tip sonication effects on structural quality of graphene nanoplatelets (GNPs) for superior solvent dispersion. Ultrasonics Sonochemistry, 45. pp. 133-149. ISSN 13504177

Yusoff, N.H.N. and Mamat, O. and Isa, M.C. and Amir, N. (2018) Optimisation of electrodeposition parameters on the mechanical properties of nickel cobalt coated mild steel. Defence S and T Technical Bulletin, 11 (1). pp. 57-65. ISSN 19856571

Baig, Z. and Mamat, O. and Mustapha, M. (2018) Recent Progress on the Dispersion and the Strengthening Effect of Carbon Nanotubes and Graphene-Reinforced Metal Nanocomposites: A Review. Critical Reviews in Solid State and Materials Sciences, 43 (1). pp. 1-46. ISSN 10408436

Baig, Z. and Mamat, O. and Mustapha, M. and Mumtaz, A. and Ali, S. and Sarfraz, M. (2018) Surfactant-decorated graphite nanoplatelets (GNPs) reinforced aluminum nanocomposites: sintering effects on hardness and wear. International Journal of Minerals, Metallurgy and Materials, 25 (6). pp. 704-715. ISSN 16744799

Baig, Z. and Mamat, O. and Mustapha, M. and Mumtaz, A. and Sarfraz, M. and Haider, S. (2018) An efficient approach to address issues of graphene nanoplatelets (GNPs) incorporation in aluminium powders and their compaction behaviour. Metals, 8 (2). ISSN 20754701

Hazwani Dzulkafli, H. and Ahmad, F. and Ullah, S. and Hussain, P. and Mamat, O. and Megat-Yusoff, P.S.M. (2017) Effects of talc on fire retarding, thermal degradation and water resistance of intumescent coating. Applied Clay Science, 146. pp. 350-361. ISSN 01691317

Baig, Z. and Mamat, O. and Mustapha, M. and Sarfraz, M. (2017) Influence of surfactant type on the dispersion state and properties of graphene nanoplatelets reinforced aluminium matrix nanocomposites. Fullerenes Nanotubes and Carbon Nanostructures, 25 (9). pp. 545-557. ISSN 1536383X

Kamal, S. and Sharma, K.V. and Srinivasa Rao, P. and Mamat, O. (2017) Thermal Spray Coatings for Hot Corrosion Resistance. Topics in Mining, Metallurgy and Materials Engineering. pp. 235-268. ISSN 23643293

Hashim, N. and Mamat, O. and Baig, Z. (2016) Application of taguchi's method on the purifying process of tronoh silica sand via mechanical milling and ultrasonic bath. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12017-12022. ISSN 18196608

Mamat, O. and Mailabari, R.J. (2016) Characterization and production of conductive filler from oil palm ash and its performance in epoxy matrix. International Journal of Engineering and Technology, 8 (2). pp. 966-973. ISSN 23198613

Mailabari, R.J. and Mamat, O. and Baig, Z. (2016) Dispersion of carbon black in epoxy resin and the electrical property of the nanocomposite. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12176-12180. ISSN 18196608

Nik Yusoff, N.H. and Mamat, O. and Isa, M.C. (2016) Electrode position of nickel-cobalt/alumina (Ni-Co/Al2O3) composite coatings: A current approach. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13331-13337. ISSN 18196608

Baig, Z. and Mamat, O. and Mustapha, M. and Altaf, K. and Mailabari, R.J. (2016) Graphene nanoplatelets (GNPS) exfoliation and dispersion in metal powder using different solvents. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12023-12028. ISSN 18196608

Johari, M.I.A. and Mustapha, M. and Mamat, O. and Kakooei, S. and Ginta, T.L. and Ismadi, M.Z.P. (2016) The microstructure, physical and mechanical properties of silicon carbide with alumina and yttria as sintering additives. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13300-13304. ISSN 18196608

Muhammad, I.D. and Awang, M. and Mamat, O. and Shaari, K.Z.K. (2015) Estimating young's modulus of single-walled zirconia nanotubes using nonlinear finite element modeling. Journal of Nanomaterials, 2015. ISSN 16874110

Mebrahitom Asmelash, G. and Mamat, O. and Ahmad, F. and Prasada Rao, A.K. (2015) Thermal shock and fatigue behavior of pressureless sintered Al2O3�SiO2�ZrO2 composites. Journal of Advanced Ceramics, 4 (3). pp. 190-198. ISSN 22264108

Nik Yusoff, N.H. and Mamat, O. and Isa, M.C. (2015) A review of electrodeposition techniques and variables for production of nickel-cobalt / alumina (Ni-Co/Al2O3) composite coatings. Defence S and T Technical Bulletin, 8 (2). pp. 129-140. ISSN 19856571

Amir, A. and Mamat, O. (2014) Effects of SiO2 particles in mechanical properties of iron composite. Applied Mechanics and Materials, 465-46. pp. 886-890. ISSN 16609336

Rizlan, Z. and Mamat, O. (2014) Mechanical milling of Tronoh silica sand nanoparticles using low speed ball milling process. Applied Mechanics and Materials, 465-46. pp. 998-1002. ISSN 16609336

Muhammad, I.D. and Awang, M. and Mamat, O. (2014) Modelling the elastic constants of cubic zirconia using molecular dynamics simulations. Advanced Materials Research, 845. pp. 387-391. ISSN 10226680

Oumer, A.N. and Mamat, O. (2014) Numerical modelling of non-isothermal flow of fibre suspensions: Prediction of fibre orientation in three-dimensional cavities. International Journal of Computational Science and Engineering, 9 (3). pp. 247-256. ISSN 17427185

Mustapha, M. and Othman, E.A. and Norsal, K. and Mustapha, F. and Mamat, O. and Ramesh, S. (2013) Carbothermal nitridation process of mechanically milled silica sand using Taguchi's method. Ceramics International, 39 (6). pp. 6119-6130. ISSN 02728842

Asmelash, G.M. and Mamat, O. and Ahmad, F. (2013) Investigation on the effect of silica sand addition in densification of Al2O3-SiO2-ZrO2 composite. Journal of Ceramic Processing Research, 14 (1). pp. 22-26. ISSN 12299162

Ugheoke, B.I. and Mamat, O. and Ari-Wahjoedi, B. (2013) Optimization of production process parameters of rice husk silica (RHS) refractories. Journal of the Australian Ceramic Society, 49 (1). pp. 92-100. ISSN 0004881X

Ahmad, T. and Mamat, O. and Ahmad, R. and Malik, A.N. (2013) Studying the formation of Fe2SiO4 and pearlite phases in iron-silica sand nanoparticle composites. Defect and Diffusion Forum, 337-33. pp. 39-47. ISSN 10120386

Ugheoke, B.I. and Mamat, O. and Ari-Wahjoedi, B. (2013) Thermal expansion behavior, phase transitions and some physico-mechanical characteristics of fired doped rice husk silica refractory. Journal of Advanced Ceramics, 2 (1). pp. 79-86. ISSN 22264108

Raza, M.R. and Ahmad, F. and Mamat, O. and Omar, M.A. and German, R.M. and Muhsan, A.S. (2012) Effects of sintering temperature and cooling rate on mechanical properties of powder injection molded 316L stainless steel. Solid State Phenomena, 185. pp. 102-105. ISSN 10120394

Ugheoke, B.I. and Mamat, O. (2012) Hydro thermo-baric processing and properties of nano silica from rice husk. Applied Mechanics and Materials, 152-15. pp. 177-182. ISSN 16609336

Ahmad, T. and Mamat, O. and Ahmad, R. (2012) Physico-mechanical properties of sintered iron-silica sand nanoparticle composites: A preliminary study. Defect and Diffusion Forum, 332. pp. 7-16. ISSN 10120386

Asmelash, G.M. and Mamat, O. (2012) Pressureless sintering and characterization of Al2O 3-SiO2-ZrO2 composite. Defect and Diffusion Forum, 329. pp. 113-128. ISSN 10120386

Asmelash, G.M. and Mamat, O. (2012) Processing and characterisation of Al2O3-SiO 2-ZrO2 composite material. International Journal of Microstructure and Materials Properties, 7 (1). pp. 64-76. ISSN 17418410

Asmelash, G.M. and Mamat, O. and Ahmad, F. (2012) Toughening mechanisms of Al2O3-SiO 2-ZrO2 composite materials. Ceramics - Silikaty, 56 (4). pp. 360-366. ISSN 08625468

Ahmada, T. and Mamat, O. (2012) Tronoh silica sand nanoparticle production and applications design for composites. Defect and Diffusion Forum, 330. pp. 39-47. ISSN 10120386

Ugheoke, I.B. and Mamat, O. (2012) A critical assessment and new research directions of rice husk silica processing methods and properties. Maejo International Journal of Science and Technology, 6 (3). pp. 430-448. ISSN 19057873

Ugheoke, B.I. and Mamat, O. (2012) A novel method for high volume production of nano silica from rice husk: Process development and product characteristics. International Journal of Materials Engineering Innovation, 3 (2). pp. 139-155. ISSN 17572754

Oumer, A.N. and Mamat, O. (2012) A study of fiber orientation in short fiber-reinforced composites with simultaneous mold filling and phase change effects. Composites Part B: Engineering, 43 (3). pp. 1087-1094. ISSN 13598368

Ahmeda, T. and Mamat, O. (2011) Characterization and properties of copper-silica sand nanoparticle composites. Defect and Diffusion Forum, 319-32. pp. 95-105. ISSN 10120386

Ahmeda, T. and Mamat, O. (2011) Characterization and properties of iron/silica-sand-nanoparticle composites. Defect and Diffusion Forum, 316-31. pp. 97-106. ISSN 10120386

Ahmad, T. and Mamat, O. and Wahjoedi, B.A. (2011) Development and characterization of alumina-silica sand nanoparticle composites. Defect and Diffusion Forum, 319-32. pp. 85-94. ISSN 10120386

Mustapha, M. and Mustapha, F. and Mamat, O. and Hussain, P. (2011) Fabrication of aluminium foam through pressure assisted high frequency induction heated sintering dissolution process: An experimental observation. Powder Metallurgy, 54 (3). pp. 343-353. ISSN 00325899

Dzulkafli, H.H. and Hussain, P. and Mamat, O. and Ahmad, F. (2011) Preparation and characterization of intumescent coating using talc Mg 3SiO 4O 10(OH 2) as a filler. Malaysian Journal of Microscopy, 7 (1). pp. 58-64. ISSN 18237010

Firmanto, H. and Hussain, P. and Mamat, O. (2011) Reaction layers of the diffusion-bonded sialon and high-chromium steel. Journal of Applied Sciences, 11 (10). pp. 1809-1814. ISSN 18125654

Hudiyo, F. and Patthi, H. and Mamat, O. (2011) Suppression of iron silicide formation in the reaction layer of sialon- 7.5 Cr ferritic steel joint. Defect and Diffusion Forum, 312-31. pp. 888-893. ISSN 10120386

Amir, A. and Mamat, O. (2011) A review of wear mechanisms of ceramic-reinforced metal-matrix composite: Case study of nano silica reinforced iron. Defect and Diffusion Forum, 319-32. pp. 77-84. ISSN 10120386

Ariatedja, J.B. and Mamat, O. (2011) A semi-elliptical crack modeling and fracture constraint on failure diagram. Journal of Applied Sciences, 11 (11). pp. 2006-2011. ISSN 18125654

Goudah, G. and Ahmad, F. and Mamat, O. (2010) Microstructural studies of sintered carbon nanotubes reinforced copper matrix composite. Journal of Engineering Science and Technology, 5 (3). pp. 272-283. ISSN 18234690

Mustapha, F. and Mustapha, M. and Noorsal, K. and Mamat, O. and Hussain, P. and Ahmad, F. and Muhamad, N. and Haris, S.M. (2010) Preliminary study on the fabrication of aluminium foam through pressure assisted sintering dissolution process. Journal of Materials Processing Technology, 210 (12). pp. 1598-1612. ISSN 09240136

Goudah, G. and Ahmad, F. and Mamat, O. and Omar, M.A. (2010) Preparation and characterization of copper feedstock for metal injection molding. Journal of Applied Sciences, 10 (24). pp. 3295-3300. ISSN 18125654

Firmanto, H. and Hussain, P. and Mamat, O. (2010) Suppression of iron silicide formation in the reaction layer of sialon-7.5 Cr ferritic steel joint. Defect and Diffusion Forum, 312-31. pp. 889-893. ISSN 10120386

Ugheoke, B.I. and Mamat, O. and Ariwahjoedi, B. (2010) A brief survey of the literature on silica refractory research and development: The case for nanostructured silica obtained from rice husk ash (RHA). Defect and Diffusion Forum, 307. pp. 53-62. ISSN 10120386

Conference or Workshop Item

Baig, Z. and Mamat, O. and Mustapha, M. and Ali, S. and Yasir, M. (2018) Low energy solution ball milling of graphene nanoplatelets (GNPs) reinforced aluminium nanocomposites and its mechanical properties. In: UNSPECIFIED.

Mohd Sohor, M.A.H. and Mustapha, M. and Mamat, O. (2017) Analysis of contributing factors for synthesizing silicon carbide using Taguchi's approach. In: UNSPECIFIED.

Mohd Sohor, M.A.H. and Mustapha, M. and Mamat, O. (2017) The effect of milling duration on silicon dioxide characterization. In: UNSPECIFIED.

Amir, A. and Mamat, O. (2015) Effects of sintering temperatures on microstructure and wear resistance of iron-silica composite. In: UNSPECIFIED.

Hashim, N. and Mamat, O. (2015) Study on the influence of volume size of the milling jar in purifying Tronoh silica sand using ball milling process. In: UNSPECIFIED.

Rizlan, M.Z. and Mamat, O. (2013) Mechanical milling of tronoh silica sand nanoparticles using low speed ball milling process. In: UNSPECIFIED.

Mustapha, M. and Ismail, F. and Mamat, O. (2011) Empirical relationship between relative electrical conductivity and relative density of the AI-foam fabricated through pressure assisted sintering/dissolution process. In: UNSPECIFIED.

Ahmed, T. and Mamat, O. (2011) The development and characterization of HDPE-silica sand nanoparticles composites. In: UNSPECIFIED.

Ahmed, T. and Mamat, O. (2011) The development and properties of polypropylene-silica sand nanoparticles composites. In: UNSPECIFIED.

Hussain, P. and Mamat, O. and Mohammad, M. and Jaafar, W.M.N.W. (2010) Formation of nitrogen-pearlite in the diffusion bonding of sialon to 316L stainless steel. In: UNSPECIFIED.

Ahmad, F. and Goudah, G. and Mamat, O. and Muti, N. and German, R.M. (2008) Development of carbon nanotubes-reinforced copper composites for heat sinking applications. In: UNSPECIFIED.

Ahmad, F. and Mamat, O. and German, R.M. and Amir, N. (2007) Effects of particle shape and fiber length on viscosity of metal composite mixes. In: UNSPECIFIED.

Ahmad, F. and Hashim, F.M. and Mamat, O. (2005) Fiber breakage in processing powder injection molded metal matrix composites. In: UNSPECIFIED.

Book

Alam, M.A. and Ya, H.H. and Sapuan, S.M. and Mamat, O. and Parveez, B. and Yusuf, M. and Masood, F. and Ilyas, R.A. (2022) Recent Advancements in Advanced Composites for Aerospace Applications: A Review. Springer International Publishing, pp. 319-339. ISBN 9783030881924; 9783030881917