Article

Malik, K. and Ahmad, F. and Yunus, N.A. and Gunister, E. and Shahed, C.A. (2024) Mechanical Investigation of Kenaf/Carbon Hybrid Composites for Building and Construction Applications. Journal of Composites for Construction, 28 (1).

Malik, K. and Ahmad, F. and Dawood, M.S. and Islam, M.S. and Ali, S. and Raza, A. and Shahed, C.A. (2024) Mechanical property enhancement of graphene-kenaf-epoxy multiphase composites for automotive applications. Composites Part A: Applied Science and Manufacturing, 177. ISSN 1359835X

Shahed, C.A. and Ahmad, F. and Günister, E. and Foudzi, F.M. and Ali, S. and Malik, K. and Harun, W.S.W. (2023) Antibacterial mechanism with consequent cytotoxicity of different reinforcements in biodegradable magnesium and zinc alloys: A review. Journal of Magnesium and Alloys, 11 (9). pp. 3038-3058.

Ali, S. and Ahmad, F. and Yusoff, P.S.M.M. and Muhamad, N. and Haider, W. and Malik, K. and Shahed, C.A. (2023) Interface and mechanical properties of graphene/copper composite with sonication induced Au decoration of graphene. Powder Technology, 430.

Shahed, C.A. and Ahmad, F. and Günister, E. and Altaf, K. and Ali, S. and Raza, A. and Malik, K. and Haider, W. (2023) Microstructure and mechanical performance of low-cost biomedical-grade Titanium-316L alloy. Journal of Materials Research and Technology, 27. pp. 8008-8022.

Malik, K. and Ahmad, F. and Yunus, N.A. and Gunister, E. and Ali, S. and Raza, A. (2023) Physical and mechanical properties of kenaf/flax hybrid composites. Journal of Applied Polymer Science, 140 (5).

Raza, A. and Ahmad, F. and Badri, T.M. and Raza, M.R. and Malik, K. and Ali, S. (2023) Selection of Materials Based on Thermo-Mechanical Properties of Thermal Barrier Coatings and Their Failures�A Review. Lecture Notes in Mechanical Engineering. pp. 255-264.

Malik, K. and Ahmad, F. and Yunus, N.A. and Nakato, T. and Mouri, E. and Dawood, S. and Memon, I.R. (2023) A new method of reinforcing graphene nanoplatelets in glass/epoxy composites: Eine neue Methode zur Verstärkung von Glas-/Epoxid-Verbundwerkstoffen mit Graphen-Nanoplättchen. Materialwissenschaft und Werkstofftechnik, 54 (9). pp. 1157-1166.

Malik, K. and Ahmad, F. and Gunister, E. (2022) Drilling Performance of Natural Fiber Reinforced Polymer Composites: A Review. Journal of Natural Fibers, 19 (12). pp. 4761-4779. ISSN 15440478

Ali, S. and Ahmad, F. and Shirazi, M.I. and Malik, K. and Raza, M.R. and Memon, I.R. (2022) Flow induced fiber orientation in short carbon fiber reinforced copper matrix composites. Materials Today Communications, 33. ISSN 23524928

Malik, K. and Ahmad, F. and Yunus, N.A. and Gunister, E. and Dawood, M.S.I.S. and Ali, S. and Mani, C.S. and Syahir, M. and Larry, A.L. (2022) The Hybridization Effects of Glass and Carbon Fibers on the Mechanical Properties of Kenaf Mat/Epoxy Composites. Journal of Natural Fibers, 19 (17). pp. 15432-15447. ISSN 15440478

Raza, A. and Ahmad, F. and Badri, T.M. and Raza, M.R. and Malik, K. (2022) An Influence of Oxygen Flow Rate and Spray Distance on the Porosity of HVOF Coating and Its Effects on Corrosion�A Review. Materials, 15 (18). ISSN 19961944

Malik, K. and Ahmad, F. and Gunister, E. and Nakato, T. and Mouri, E. and Muhammad, M.B. and Ali, S. (2022) A Review of Flax Fiber Reinforced Thermoset Polymer Composites: Structure and Mechanical Performance. Journal of Natural Fibers, 19 (14). pp. 9656-9680. ISSN 15440478

Malik, K. and Ahmad, F. and Yunus, N.A. and Gunister, E. and Nakato, T. and Mouri, E. and Ali, S. (2022) A Review of Flax Fiber Reinforced Thermoset Polymer Composites: Thermal-Physical Properties, Improvements and Application. Journal of Natural Fibers, 19 (15). pp. 10412-10430. ISSN 15440478

Malik, K. and Ahmad, F. and Keong, W.T. and Gunister, E. (2022) The effects of drilling parameters on thrust force, temperature and hole quality of glass fiber reinforced polymer composites. Polymers and Polymer Composites, 30. ISSN 09673911

Malik, K. and Ahmad, F. and Gunister, E. (2021) A Review on the Kenaf Fiber Reinforced Thermoset Composites. Applied Composite Materials, 28 (2). pp. 491-528. ISSN 0929189X

Ali, S. and Ahmad, F. and Yusoff, P.S.M.M. and Muhamad, N. and Oñate, E. and Raza, M.R. and Malik, K. (2021) A review of graphene reinforced Cu matrix composites for thermal management of smart electronics. Composites Part A: Applied Science and Manufacturing, 144. ISSN 1359835X

Kabir, S. and Ahmad, F. and Malik, K. and Nosbi, N. and Gui Llaumat, L. (2020) Effect of heat resistant coating on the drilled hole quality of hybrid fiber reinforced epoxy composite. Evergreen, 7 (4). pp. 530-537. ISSN 21890420

Conference or Workshop Item

Malik, K. and Ahmad, F. and Yunus, N.A. and Yusoff, P.S.M.M. and Guan, B. and Nosbi, N. and Ali, S. and Nakato, T. and Mouri, E. (2021) The effects of graphene hybridization on mechanical properties of GFRP composites. In: UNSPECIFIED.