Article

Ahmed, T. and Ya, H.H. and Majid, M.A.A. and Imran, M. and Khan, R. and Azeem, M. and Azad Alam, M. and Khalid, H.U. and Mehmood, A. (2023) The Study of Pseudo-ductile Polymer Nano Composite Reinforced with Non-treated Inorganic Nanofillers. Lecture Notes in Mechanical Engineering. pp. 981-992.

Hampo, C.C. and Ya, H.H. and Majid, M.A.A. and Mokhtar, A.A. and Kalpani Rasangika, A.H.D. and Muhammed, M. (2021) Life cycle assessment of a vapor compression cooling system integrated within a district cooling plant. Sustainability (Switzerland), 13 (21). ISSN 20711050

Hampo, C.C. and Akmar, A.B. and Majid, M.A.A. (2021) Life cycle assessment of an electric chiller integrated with a large district cooling plant. Sustainability (Switzerland), 13 (1). pp. 1-16. ISSN 20711050

Majid, M.A.A. and Muhammad, M. and Hampo, C.C. and Akmar, A.B. (2020) Analysis of a thermal energy storage tank in a large district cooling system: A case study. Processes, 8 (9). ISSN 22279717

Hashmi, M.B. and Majid, M.A.A. and Lemma, T.A. (2020) Combined effect of inlet air cooling and fouling on performance of variable geometry industrial gas turbines. Alexandria Engineering Journal, 59 (3). pp. 1811-1821. ISSN 11100168

Khan, R. and Ya, H.H. and Pao, W. and Majid, M.A.A. and Ahmed, T. and Ahmad, A. and Alam, M.A. and Azeem, M. and Iftikhar, H. (2020) Effect of sand fines concentration on the erosion-corrosion mechanism of carbon steel 90� elbow pipe in slug flow. Materials, 13 (20). pp. 1-16. ISSN 19961944

Khan, M.R. and Ya, H.H. and Pao, W. and Majid, M.A.A. (2020) Numerical Investigation of Sand Particle Erosion in Long Radius Elbow for Multiphase Flow. Lecture Notes in Mechanical Engineering. pp. 41-49. ISSN 21954356

Salim, D.A. and Majid, M.A.A. and Nordin, A. (2020) A Study of a Heat Exchanger Sizing of a Gas Turbine Inlet Air Cooling for Power Enhancement. Lecture Notes in Mechanical Engineering. pp. 361-368. ISSN 21954356

Abdul Karim, Z.A. and Afiq Sidqi, M. and Majid, M.A.A. and Muhammad, M. and Aoki, H. and Xiaoming, Z. (2019) Exergy and regression analysis for optimization of electric chillers at a gas district cooling plant. International Journal of Advanced Trends in Computer Science and Engineering, 8 (1.3 S1). pp. 98-102. ISSN 22783091

Majid, M.A.A. and Ya, H.H. and Mamat, O. and Mahadzir, S. (2019) Techno economic evaluation of cold energy from Malaysian liquefied natural gas regasification terminals. Energies, 12 (23). ISSN 19961073

Salim, D.A. and Majid, M.A.A. and Noordin, A. (2018) Study on turbine inlet air cooling by chilled water from steam absorption chiller. ARPN Journal of Engineering and Applied Sciences, 13 (15). pp. 4453-4457. ISSN 18196608

Majid, M.A.A. and Nordin, A. and Salim, D.A. (2017) Exergoeconomics model for power and chilled water cost rates of gas-fueled district cooling system. International Journal of Applied Engineering Research, 12 (21). pp. 10802-10808. ISSN 09734562

Nordin, A. and Majid, M.A.A. (2017) Parametric study on effect of pinch and approach points on heat recovery steam generator performance at a district cooling system. Journal of Mechanical Engineering and Sciences, 11 (2). pp. 2626-2636. ISSN 22894659

Majid, M.A.A. and Fudzin, F. (2017) Study on robots failures in automotive painting line. ARPN Journal of Engineering and Applied Sciences, 12 (1). pp. 62-67. ISSN 18196608

Majid, M.A.A. and Nordin, A. and Mokhtar, A.A. (2016) Exergoeconomic power cost rates model for onshore and offshore gas turbines. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14322-14326. ISSN 18196608

Nordin, A. and Majid, M.A.A. (2016) Parametric study on the effects of pinch and approach points on heat recovery steam generator performance at a district cooling system. Journal of Mechanical Engineering and Sciences, 10 (2). pp. 2134-2144. ISSN 22894659

Majid, M.A.A. and Fudzin, F. and Mokhtar, A.A. (2016) Replacement model for robots in automotive assembly plant. ARPN Journal of Engineering and Applied Sciences, 11 (14). pp. 8562-8567. ISSN 18196608

Raza, T. and Muhammad, M.B. and Majid, M.A.A. (2016) A comprehensive framework and key performance indicators for maintenance performance measurement. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12146-12152. ISSN 18196608

Nordin, A. and Majid, M.A.A. (2015) Performance assessment of Heat Recovery Steam Generator at district Cooling plant. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10196-10199. ISSN 18196608

Wassan, R.K. and Majid, M.A.A. and Mokhtar, A.A. (2014) Impact of different repair assumptions on repairable system risk assessment. Research Journal of Applied Sciences, Engineering and Technology, 7 (4). pp. 870-874. ISSN 20407459

Nordin, A. and Majid, M.A.A. (2013) Assignment model for charging of thermal energy storage by electric chillers using zero-one programming approach. Asian Journal of Scientific Research, 6 (3). pp. 546-554. ISSN 19921454

Majid, M.A.A. and Zainuddin, A. and Tamiru, A.L. (2013) Historical data based models for chilled water production from waste heat of turbine. Journal of Applied Sciences, 13 (2). pp. 301-307. ISSN 18125654

Majid, M.A.A. and Sulaiman, S.A. and Mokhtar, H. and Tamiru, A.L. (2013) Operating point estimation for an absorption process using data clustering technique. Journal of Applied Sciences, 13 (3). pp. 377-384. ISSN 18125654

Majid, M.A.A. and Sulaiman, S.A. and Ibrahim, I. and Baharddin, Z. (2012) Causal model for peak and off peak waste heat recovery for chilled water production. Journal of Applied Sciences, 12 (24). pp. 2636-2640. ISSN 18125654

Ali, A. and Majid, M.A.A. and Muhammad, M. (2012) Comparative study between degradation analysis and API 510 remaining life evaluation method for feed gas filter vessel reliability analysis. Journal of Applied Sciences, 12 (23). pp. 2448-2453. ISSN 18125654

Muhammad, M. and Hussin, H. and Mokhtar, A.A. and Majid, M.A.A. (2012) Reliability assessment of repairable system based on performance data. Journal of Applied Sciences, 12 (24). pp. 2568-2573. ISSN 18125654

Woldeyohannes, A.D. and Majid, M.A.A. (2011) Effect of age of pipes on performance of natural gas transmission pipeline network system. Journal of Applied Sciences, 11 (9). pp. 1612-1617. ISSN 18125654

Majid, M.A.A. and Nasir, M. (2011) Multi-state system availability model of electricity generation for a cogeneration district cooling plant. Asian Journal of Applied Sciences, 4 (4). pp. 431-438. ISSN 19963343

Waluyo, J. and Majid, M.A.A. (2011) Performance evaluation of stratified TES using sigmoid dose response function. Journal of Applied Sciences, 11 (9). pp. 1642-1647. ISSN 18125654

Majid, M.A.A. and Muhammad, M. and Yem, N.I.Y. (2011) RCM Analysis of Process Equipment: A Case Study on Heat Exchangers. Journal of Applied Sciences, 11 (11). pp. 2058-2062. ISSN 18125654

Woldeyohannes, A.D. and Majid, M.A.A. (2011) Simulation model for natural gas transmission pipeline network system. Simulation Modelling Practice and Theory, 19 (1). pp. 196-212. ISSN 1569190X

Reshid, M.N. and Majid, M.A.A. (2011) A multi-state reliability model for a gas fueled cogenerated power plant. Journal of Applied Sciences, 11 (11). pp. 1945-1951. ISSN 18125654

Waluyo, J. and Majid, M.A.A. (2010) Temperature profile and thermocline thickness evaluation of a stratified thermal energy storage tank. International Journal of Mechanical and Mechanics Engineering, 10 (1). pp. 7-12. ISSN 2077124X

Conference or Workshop Item

Majid, M.A.A. and Hui, P.S. and Soomro, A.A. (2020) Performance assessment of stratified chilled water thermal energy storage tank at district cooling plant. In: UNSPECIFIED.

Zhang, X. and Aoki, H. and Majid, M.A.A. and Hassan, Z. and Karim, Z.A.A. and Muhammad, M. (2018) Experiences and lessons from an anomaly root cause analysis in a large district cooling plant. In: UNSPECIFIED.

Majid, M.A.A. and Yamin, M.F. (2018) Study on the performance analysis of stratified thermal energy storage system of a district cooling plant. In: UNSPECIFIED.

Mokhtar, A.A. and Muhammad, M. and Hussin, H. and Majid, M.A.A. (2017) Assessing performance of aging air-cooled heat exchangers using inspection and performance data. In: UNSPECIFIED.

Xiaoming, Z. and Aoki, H. and Sato, A. and Majid, M.A.A. (2017) An empirical study on performance optimization at district cooling plant of Universiti Teknologi PETRONAS. In: UNSPECIFIED.

Zain, M.Z.M. and Rani, A.M.A. and Majid, M.A.A. (2016) Analysis of reconfigurable assembly system framing systems in automotive industry. In: UNSPECIFIED.

Muhammad, M.B. and Raza, T. and Majid, M.A.A. (2016) Prediction of failures by using crow/AMSAA model in microsoft excel. In: UNSPECIFIED.

Majid, M.A.A. and Nordin, A. (2016) Study on relative COP changes with increasing heat input temperatures of double effect steam absorption chillers. In: UNSPECIFIED.

Xiaoming, Z. and Sato, A. and Kudo, Y. and Nakamura, T. and Okitsu, J. and Aoki, H. and Majid, M.A.A. (2016) A case study of electric chiller performance bottleneck diagnosis by root cause analysis. In: UNSPECIFIED.

Fudzin, A.F. and Majid, M.A.A. (2015) Reliability and availability analysis for robot subsystem in automotive assembly plant: A case study. In: UNSPECIFIED.

Ghazali, Z. and Majid, M.A.A. and Chi, T.C. (2014) Engineering economic analysis for feed gas cooler (Cold box): A case of a gas processing complex in Malaysia. In: UNSPECIFIED.

Reshid, M.N. and Majid, M.A.A. and Muhammad, M. (2014) Evaluation of redundancy for power generating unit in a cogeneration power plant. In: UNSPECIFIED.

Wassan, R.K. and Majid, M.A.A. and Mokhtar, A.A. (2014) Risk matrix model for rotating equipment. In: UNSPECIFIED.

Okitsu, J. and Khamis, M.F.I. and Majid, M.A.A. and Naono, K. and Sulaiman, S.A. (2014) Root cause analysis on changes in chiller performance using linear regression. In: UNSPECIFIED.

Majid, M.A.A. and Sulaiman, S.A. and Fujii, T. and Naono (2014) Studies on steam absorption chillers performance at a cogeneration plant. In: UNSPECIFIED.

Majid, M.A.A. (2014) Techno-economic assessment of redundancy systems for a cogeneration plant. In: UNSPECIFIED.

Majid, M.A.A. and Nasir, M. and waluyo, J. (2012) Operation and performance of a thermal energy storage system: A case study of campus cooling using cogeneration plant. In: UNSPECIFIED.

Mokhtar, A.A. and Muhammad, M. and Hussin, H. and Majid, M.A.A. (2012) Performance analysis of process plant using reliability block diagram. In: UNSPECIFIED.

Muhammad, M. and Mokhtar, A.A. and Majid, M.A.A. (2012) Reliability prediction model of a multi-state system subject to general repair and maintenance with limited failure data. In: UNSPECIFIED.

Reshid, M.N. and Majid, M.A.A. (2011) Availability and reliability modelling for chilled water generation of a cogenerated power plant using multi-state system theory. In: UNSPECIFIED.

Muhammad, M. and Majid, M.A.A. and Ibrahim, N.A. (2009) A case study of reliability assessment for centrifugal pumps in a petrochemical plant. In: UNSPECIFIED.