Article

Maiwada, U.D. and Danyaro, K.U. and Sarlan, A. and Liew, M.S. and Taiwo, A. and Audi, U.I. (2024) Energy efficiency in 5G systems: A systematic literature review. International Journal of Knowledge-Based and Intelligent Engineering Systems, 28 (1). pp. 93-132.

Musarat, M.A. and Alaloul, W.S. and Liew, M.S. (2024) Incorporating inflation rate in construction projects cost: Forecasting model. Heliyon, 10 (4).

Mohsen Alawag, A. and Salah Alaloul, W. and Liew, M.S. and Ali Musarat, M. and Baarimah, A.O. and Saad, S. and Ammad, S. (2023) Critical Success Factors Influencing Total Quality Management In Industrialised Building System: A Case Of Malaysian Construction Industry. Ain Shams Engineering Journal, 14 (2).

Bheel, N. and Mohammed, B.S. and Liew, M.S. and Zawawi, N.A.W.A. (2023) Durability Behaviours of Engineered Cementitious Composites Blended with Carbon Nanotubes against Sulphate and Acid Attacks by Applying RSM Modelling and Optimization. Buildings, 13 (8).

Bheel, N. and Mohammed, B.S. and Liew, M.S. and Zawawi, N.A.W.A. (2023) Effect of Graphene Oxide as a Nanomaterial on the Durability Behaviors of Engineered Cementitious Composites by Applying RSM Modelling and Optimization. Buildings, 13 (8).

Al-Yacouby, A.M. and Ahmed, M.M. and Liew, M.S. (2023) The Effects of Double-Side Curved Baffle Height on the Liquid Sloshing of a Spherical Tank�Numerical Study. Lecture Notes in Mechanical Engineering. pp. 55-69.

Bheel, N. and Mohammed, B.S. and Abdulkadir, I. and Liew, M.S. and Zawawi, N.A.W.A. (2023) Effects of Graphene Oxide on the Properties of Engineered Cementitious Composites: Multi-Objective Optimization Technique Using RSM. Buildings, 13 (8).

Zawawi, N.A.W.A. and Danyaro, K.U. and Liew, M.S. and Shawn, L.E. (2023) Environmental Sustainability and Efficiency of Offshore Platform Decommissioning: A Review. Sustainability (Switzerland), 15 (17).

Alawag, A.M. and Alaloul, W.S. and Liew, M.S. and Musarat, M.A. and Baarimah, A.O. (2023) Implementation of total quality management (TQM) in malay-sian industrialized building system (IBS) projects. Revista de la Construccion, 22 (1). pp. 74-87.

Aswin, M. and Al-Fakih, A. and Syed, Z.I. and Liew, M.S. (2023) Influence of Different Dapped-End Reinforcement Configurations on Structural Behavior of RC Dapped-End Beam. Buildings, 13 (1).

Giri, Y.G.A.L.P. and Mohammed, B.S. and Liew, M.S. and Zawawi, N.A.W.A. and Abdulkadir, I. and Singh, P. and Ravindran, G. (2023) Mechanical and Microstructural Properties of Rubberized Geopolymer Concrete: Modeling and Optimization. Buildings, 13 (8).

Hong, W.C. and Mohammed, B.S. and Abdulkadir, I. and Liew, M.S. (2023) Modeling and Optimizing the Effect of Palm Oil Fuel Ash on the Properties of Engineered Cementitious Composite. Buildings, 13 (3).

Al-Yacouby, A.M. and Ahmed, M.M. and Liew, M.S. (2023) Numerical Study on the Effects of Sloshing in a Spherical Tank Using Double-Side Curved Baffle. Lecture Notes in Mechanical Engineering. pp. 33-45.

Alawag, A.M. and Alaloul, W.S. and Liew, M.S. and Baarimah, A.O. and Musarat, M.A. and Al-Mekhlafi, A.-B.A. (2023) The Role of the Total-Quality-Management (TQM) Drivers in Overcoming the Challenges of Implementing TQM in Industrialized-Building-System (IBS) Projects in Malaysia: Experts� Perspectives. Sustainability (Switzerland), 15 (8). ISSN 20711050

Danyaro, K.U. and Hussain, H.H. and Abdullahi, M. and Liew, M.S. and Shawn, L.E. and Abubakar, M.Y. (2022) Development and Integration of Metocean Data Interoperability for Intelligent Operations and Automation Using Machine Learning: A Review. Applied Sciences (Switzerland), 12 (11). ISSN 20763417

Patel, M.S. and Khalifa, A.A. and Liew, M.S. and Mustaffa, Z. and Whyte, A. (2022) Downtime cost analysis of offloading operations due to influence of partially standing waves in Malaysian waters and development of graphical user interface. Annals of Operations Research, 315 (2). pp. 1263-1289. ISSN 02545330

Abdulkadir, I. and Mohammed, B.S. and Liew, M.S. and Wahab, M.M.A. (2022) Effect of Graphene Oxide and Crumb Rubber on the Drying Shrinkage Behavior of Engineered Cementitious Composite (ECC): Experimental Study, RSM�Based Modelling and Optimization. Lecture Notes in Civil Engineering, 179. pp. 29-42. ISSN 23662557

Abdulkadir, I. and Mohammed, B.S. and Ali, M.O.A. and Liew, M.S. (2022) Effects of Graphene Oxide and Crumb Rubber on the Fresh Properties of Self-Compacting Engineered Cementitious Composite Using Response Surface Methodology. Materials, 15 (7). ISSN 19961944

Al-Yacouby, A.M. and Mazli, A.A. and Liew, M.S. and Ratnayake, R.M.C. and Samarakoon, S.M.K. (2022) Finite Element Analysis of Steel Plates with Rectangular Openings Subjected to Axial Stress. Materials, 15 (13). ISSN 19961944

Musarat, M.A. and Alaloul, W.S. and Liew, M.S. (2022) Inflation rate and labours� wages in construction projects: economic relation investigation. Engineering, Construction and Architectural Management, 29 (6). pp. 2461-2494. ISSN 09699988

Appana, P.M. and Mohammed, B.S. and Abdulkadir, I. and Ali, M.O.A. and Liew, M.S. (2022) Mechanical, Microstructural and Drying Shrinkage Properties of NaOH-Pretreated Crumb Rubber Concrete: RSM-Based Modeling and Optimization. Materials, 15 (7). ISSN 19961944

Alsubal, S. and Liew, M.S. and Shawn, L.E. (2022) Preliminary Design and Dynamic Response of Multi-Purpose Floating Offshore Wind Turbine Platform: Part 1. Journal of Marine Science and Engineering, 10 (3). ISSN 20771312

Mazlina, M. and Liew, M.S. and Danyaro, K.U. and Adnan, A. and Hamid, N.H.A. (2022) Seismic Microzonation Map for a Fixed-Jacket Platform in the Malay Basin. Applied Sciences (Switzerland), 12 (18). ISSN 20763417

Baarimah, A.O. and Alaloul, W.S. and Liew, M.S. and Kartika, W. and Al-Sharafi, M.A. and Musarat, M.A. and Alawag, A.M. and Qureshi, A.H. (2022) A bibliometric analysis and review of building information modelling for post-disaster reconstruction. Sustainability (Switzerland), 14 (1). ISSN 20711050

Irawan, R. and Azizan, N.L. and Liew, M.S. and Al-Yacouby, A.M. and Danyaro, K.U. (2021) Analysis of Spread Moored FPSO-Tanker Side-by-Side System with Offloading Operability. Lecture Notes in Mechanical Engineering. pp. 309-317. ISSN 21954356

Lye, H.L. and Mohammed, B.S. and Wahab, M.M.A. and Liew, M.S. (2021) Bond relationship of carbon fiber-reinforced polymer (Cfrp) strengthened steel plates exposed to service temperature. Materials, 14 (13). ISSN 19961944

Mohammed, B.S. and Al-Fakih, A. and Liew, M.S. (2021) Characteristics of interlocking concrete bricks incorporated crumb rubber and fly ash. Lecture Notes in Civil Engineering, 132. pp. 631-639. ISSN 23662557

Musarat, M.A. and Alaloul, W.S. and Liew, M.S. (2021) Construction machinery hire rates deviation in Malaysia: an inflation rate effect analysis. Revista de la Construccion, 20 (1). pp. 91-105. ISSN 07177925

Mohammed, B.S. and Xian, L.W. and Haruna, S. and Liew, M.S. and Abdulkadir, I. and Zawawi, N.A.W.A. (2021) Deformation Properties of Rubberized Engineered Cementitious Composites Using Response Surface Methodology. Iranian Journal of Science and Technology - Transactions of Civil Engineering, 45 (2). pp. 729-740. ISSN 22286160

Abdullah, M.S. and Alaloul, W.S. and Liew, M.S. and Musarat, M.A. (2021) Delay and cost overrun of palm oil refinery construction projects: Artificial neural network (ann) model. Lecture Notes in Civil Engineering, 132. pp. 580-589. ISSN 23662557

Liew, M.S. and Mohammed, B.S. and Danyaro, K.U. and Al-Yacouby, A.M. and Haruna, S. (2021) Effects of quartz powder on the compressive strength of high performance engineered cementitious composites. Lecture Notes in Civil Engineering, 132. pp. 677-684. ISSN 23662557

Mazlina, M. and Liew, M.S. and Adnan, A. and Harahap, I.S.H. and Hamid, N.H. (2021) Ground response analysis for stiff and soft soil under different earthquake events: A comparison. Lecture Notes in Civil Engineering, 132. pp. 891-898. ISSN 23662557

Musarat, M.A. and Alaloul, W.S. and Liew, M.S. (2021) Impact of inflation rate on construction projects budget: A review. Ain Shams Engineering Journal, 12 (1). pp. 407-414. ISSN 20904479

Alawag, A.M.M. and Alaloul, W.S. and Liew, M.S. and Al-Bared, M.A.M. and Zawawi, N.A.W.A. and Ammad, S. (2021) The Implementation of the Industrialized Building System in the Malaysian Construction Industry�a Comprehensive Review. Lecture Notes in Mechanical Engineering. pp. 3-16. ISSN 21954356

Alaloul, W.S. and Musarat, M.A. and Liew, M.S. and Qureshi, A.H. and Maqsoom, A. (2021) Investigating the impact of inflation on labour wages in Construction Industry of Malaysia. Ain Shams Engineering Journal, 12 (2). pp. 1575-1582. ISSN 20904479

Alsubal, S. and Alaloul, W.S. and Musarat, M.A. and Shawn, E.L. and Liew, M.S. and Palaniappan, P. (2021) Life cycle cost assessment of offshore wind farm: Kudat malaysia case. Sustainability (Switzerland), 13 (14). ISSN 20711050

Shahrul, S. and Mohammed, B.S. and Wahab, M.M.A. and Liew, M.S. (2021) Mechanical properties of crumb rubber mortar containing nano-silica using response surface methodology. Materials, 14 (19). ISSN 19961944

Abdulkadir, I. and Mohammed, B.S. and Liew, M.S. and Wahab, M.M.A. (2021) Modelling and multi-objective optimization of the fresh and mechanical properties of self-compacting high volume fly ash ECC (HVFA-ECC) using response surface methodology (RSM). Case Studies in Construction Materials, 14. ISSN 22145095

Abdulkadir, I. and Mohammed, B.S. and Liew, M.S. and Wahab, M.M.A. (2021) Modelling and optimization of the mechanical properties of engineered cementitious composite containing crumb rubber pretreated with graphene oxide using response surface methodology. Construction and Building Materials, 310. ISSN 09500618

Al-Fakih, A. and Mohammed, B.S. and Liew, M.S. (2021) On rubberized engineered cementitious composites (R-ECC): A review of the constituent material. Case Studies in Construction Materials, 14. ISSN 22145095

Anwar, A. and Mohammed, B.S. and Wahab, M.B.A. and Muthusamy, K. and Liew, M.S. (2021) Structural Quality of Graphene Oxide Nanosheets on the Basis of Defect Ratio: A Raman Study. Lecture Notes in Mechanical Engineering, 46. pp. 423-439. ISSN 21954356

Al-Yacouby, A.M. and Hao, L.J. and Liew, M.S. and Chandima Ratnayake, R.M. and Samarakoon, S.M.K. (2021) Thin-walled cylindrical shell storage tank under blast impacts: Finite element analysis. Materials, 14 (22). ISSN 19961944

Murali, M. and Mohammed, B.S. and Abdulkadir, I. and Liew, M.S. and Alaloul, W.S. (2021) Utilization of crumb rubber and high-volume fly ash in concrete for environmental sustainability: Rsm-based modeling and optimization. Materials, 14 (12). ISSN 19961944

Al-Fakih, A. and Mohammed, B.S. and Liew, M.S. and Wahab, M.W.A. and Haruna, S. (2021) Utilizing of crumb rubber derived recycled scrap tires in masonry application: A review. Materials Science Forum, 1030 M. pp. 73-87. ISSN 02555476

Musarat, M.A. and Alaloul, W.S. and Liew, M.S. and Maqsoom, A. and Qureshi, A.H. (2021) The effect of inflation rate on CO2 emission: A framework for malaysian construction industry. Sustainability (Switzerland), 13 (3). pp. 1-16. ISSN 20711050

Alsubal, S. and Liew, M.S. and Lim, E.S. and Harahap, I.S.H. and Nasser, A.M.M. (2021) The future of wind power in malaysia: A review. Lecture Notes in Civil Engineering, 132. pp. 844-851. ISSN 23662557

Sabapathy, L. and Mohammed, B.S. and Al-Fakih, A. and Wahab, M.M.A. and Liew, M.S. and Amran, Y.H.M. (2020) Acid and sulphate attacks on a rubberized engineered cementitious composite containing graphene oxide. Materials, 13 (14). ISSN 19961944

Lye, H.L. and Mohammed, B.S. and Liew, M.S. and Wahab, M.M.A. and Al-Fakih, A. (2020) Bond behaviour of CFRP-strengthened ECC using Response Surface Methodology (RSM). Case Studies in Construction Materials, 12. ISSN 22145095

Al-Fakih, A. and Mohammed, B.S. and Wahab, M.M.A. and Liew, M.S. and Mugahed Amran, Y.H. and Alyousef, R. and Alabduljabbar, H. (2020) Characteristic compressive strength correlation of rubberized concrete interlocking masonry wall. Structures, 26. pp. 169-184. ISSN 23520124

Liew, M.S. and Danyaro, K.U. and Zawawi, N.A.W.A. (2020) A Comprehensive Guide to Different Fracturing Technologies: A Review. Energies, 13 (13). ISSN 19961073

Wahab, M.M.A. and Kurian, V.J. and Liew, M.S. and Kim, D.K. (2020) Condition Assessment Techniques for Aged Fixed-Type Offshore Platforms Considering Decommissioning: a Historical Review. Journal of Marine Science and Application, 19 (4). pp. 584-614. ISSN 16719433

Toloue, I. and Liew, M.S. and Hamonangan Harahap, I.S. and Lee, H.E. (2020) Damage detection in frame structures using noisy accelerometers and Damage Load Vectors (DLV). Scientia Iranica, 27 (4 A). pp. 1776-1785. ISSN 10263098

Hong, D.L.H. and Mohammed, B.S. and Al-Fakih, A. and Wahab, M.M.A. and Liew, M.S. and Mugahed Amran, Y.H. (2020) Deformation properties of rubberized ecc incorporating nano graphene using response surface methodology. Materials, 13 (12). pp. 1-14. ISSN 19961944

Patel, M.S. and Liew, M.S. and Mustaffa, Z. and Yee, N.C. and Whyte, A. (2020) Development of downtime cost calculator for offloading operations influenced by parametric rolling. Journal of Marine Science and Engineering, 8 (1). ISSN 20771312

Patel, M.S. and Liew, M.S. and Mustaffa, Z. and Abdurasheed, A.S. and Whyte, A. (2020) Downtime cost analysis of offloading operations under irregular waves in Malaysian waters. Ocean Systems Engineering, 10 (2). pp. 131-161. ISSN 20936702

Adamu, M. and Mohammed, B.S. and Shafiq, N. and Liew, M.S. (2020) Durability performance of high volume fly ash roller compacted concrete pavement containing crumb rubber and nano silica. International Journal of Pavement Engineering, 21 (12). pp. 1437-1444. ISSN 10298436

Mohammed, B.S. and Yen, L.Y. and Haruna, S. and Seng Huat, M.L. and Abdulkadir, I. and Al-Fakih, A. and Liew, M.S. and Abdullah Zawawi, N.A.W. (2020) Effect of elevated temperature on the compressive strength and durability properties of crumb rubber engineered cementitious composite. Materials, 13 (16). ISSN 19961944

Azizan, N.L. and Liew, M.S. and Al-Yacouby, A.M. and Danyaro, K.U. (2020) Effect of mooring line azimuth angle on the hydrodynamic performance of a moored FPSO in ultra-shallow water. Journal of Critical Reviews, 7 (5). pp. 917-922. ISSN 23945125

Haruna, S. and Mohammed, B.S. and Wahab, M.M.A. and Liew, M.S. (2020) Effect of paste aggregate ratio and curing methods on the performance of one-part alkali-activated concrete. Construction and Building Materials, 261. ISSN 09500618

Patel, M.S. and Liew, M.S. and Mustaffa, Z. and Abdurrasheed, A.S. and Whyte, A. (2020) Effects of Motion Responses and Drift Forces on Side-by-Side Offloading Operations of FPSO. Lecture Notes in Mechanical Engineering. pp. 407-413. ISSN 21954356

Anwar, A. and Mohammed, B.S. and Wahab, M.A. and Liew, M.S. (2020) Enhanced properties of cementitious composite tailored with graphene oxide nanomaterial - A review. Developments in the Built Environment, 1. ISSN 26661659

Toloue, I. and Liew, M.S. and Harahap, I.S.H. and Lee, H.E. (2020) Experimental evaluation of force analogy method (FAM) by element type. Earthquake Engineering and Engineering Vibration, 19 (1). pp. 137-147. ISSN 16713664

Azizan, N.L. and Irawan, R. and Liew, M.S. and Al-Yacouby, A.M. and Danyaro, K.U. (2020) Experimental studies of fpso responses with validation by numerical and artificial neural network prediction. Lecture Notes in Mechanical Engineering. pp. 469-482. ISSN 21954356

Al-Fakih, A. and Wahab, M.M.A. and Mohammed, B.S. and Liew, M.S. and Wan Abdullah Zawawi, N.A. and As'ad, S. (2020) Experimental study on axial compressive behavior of rubberized interlocking masonry walls. Journal of Building Engineering, 29. ISSN 23527102

Al-Fakih, A. and Mohammed, B.S. and Wahab, M.M.A. and Liew, M.S. and Mugahed Amran, Y.H. (2020) Flexural behavior of rubberized concrete interlocking masonry walls under out-of-plane load. Construction and Building Materials, 263. ISSN 09500618

Mohamad, M. and Hamid, N.H.A. and Liew, M.S. (2020) Ground response analysis in offshore Terengganu. Malaysian Construction Research Journal, 31 (2). pp. 9-18. ISSN 19853807

Yong, H.Y. and Liew, M.S. and Ovinis, M. and Danyaro, K.U. and Lim, E.S. (2020) Hydrodynamic Study of Free Standing Drilling Riser Under Hurricane Conditions. Climate Change Management. pp. 51-75. ISSN 16102002

Al-Yacouby, A.M. and Halim, E.R.B.A. and Liew, M.S. (2020) Hydrodynamic analysis of floating offshore solar farms subjected to regular waves. Lecture Notes in Mechanical Engineering. pp. 375-390. ISSN 21954356

Alaloul, W.S. and Liew, M.S. and Zawawi, N.A.W.A. and Kennedy, I.B. (2020) Industrial Revolution 4.0 in the construction industry: Challenges and opportunities for stakeholders. Ain Shams Engineering Journal, 11 (1). pp. 225-230. ISSN 20904479

Patel, M.S. and Liew, M.S. and Mustaffa, Z. and Abdurrasheed, A.S. and Whyte, A. (2020) Influence of Partially Standing Waves on Offloading Operations for Shuttle Tanker. Lecture Notes in Mechanical Engineering. pp. 399-406. ISSN 21954356

Alaloul, W.S. and Musarat, M.A. and Liew, M.S. and Zawawi, N.A.W.A. (2020) Influential Safety Performance and Assessment in Construction Projects: A Review. Lecture Notes in Civil Engineering, 53. pp. 719-728. ISSN 23662557

Musarat, M.A. and Alaloul, W.S. and Liew, M.S. and Maqsoom, A. and Qureshi, A.H. (2020) Investigating the impact of inflation on building materials prices in construction industry. Journal of Building Engineering, 32. ISSN 23527102

Liew, M.S. and Aswin, M. and Danyaro, K.U. and Mohammed, B.S. and Al-Yacouby, A.M. (2020) Investigation of fibers reinforced engineered cementitious composites properties using quartz powder. Materials, 13 (11). ISSN 19961944

Al-Yacouby, A.M. and Liew, M.S. (2020) Parametric Study of Hydrodynamic Coefficients for Circular Cylinders at Subcritical Reynolds Number. Lecture Notes in Mechanical Engineering. pp. 217-224. ISSN 21954356

Mohammed, B.S. and Aswin, M. and Liew, M.S. (2020) Prediction of failure load of RC and R-ECC dapped-end beams. Case Studies in Construction Materials, 13. ISSN 22145095

Rahim, N.I. and Mohammed, B.S. and Al-Fakih, A. and Wahab, M.M.A. and Liew, M.S. and Anwar, A. and Mugahed Amran, Y.H. (2020) Strengthening the structural behavior of web openings in RC deep beam using CFRP. Materials, 13 (12). pp. 1-21. ISSN 19961944

Alaloul, W.S. and Liew, M.S. and Zawawi, N.A.W. and Mohammed, B.S. and Adamu, M. and Musharat, M.A. (2020) Structural equation modelling of construction project performance based on coordination factors. Cogent Engineering, 7 (1). ISSN 23311916

Donghai, H.E. and Liew, M.S. and Ovinis, M. and Danyaro, K.U. (2020) Study on vibration of U-shaped flexible jumpers. Journal of Engineering Science and Technology, 15 (4). pp. 2414-2437. ISSN 18234690

Patel, M.S. and Azizan, N. and Liew, M.S. and Mustaffa, Z. and Ali, M.O. and Whyte, A. (2020) A numerical study: Transitional hydrodynamic behaviour of a moored barge in different ultra-shallow water depths of Malaysia. Open Civil Engineering Journal, 13 (1). pp. 238-259. ISSN 18741495

Abdulkadir, I. and Mohammed, B.S. and Liew, M.S. and Bin Abdul Wahab, M.M. and Zawawi, N.A.W.A. and As'ad, S. (2020) A review of the effect of waste tire rubber on the properties of ECC. International Journal of Advanced and Applied Sciences, 7 (8). pp. 105-116. ISSN 2313626X

Anwar, A. and Mohammed, B.S. and Liew, M.S. and Wahab, M.A. and Zawawi, N.A.W.A. (2019) Below-Grade Sulfur Storage Pits in Oil Refineries: A Review. Journal of Failure Analysis and Prevention, 19 (6). pp. 1745-1760. ISSN 15477029

Achara, B.E. and Mohammed, B.S. and Liew, M.S. (2019) Bond behaviour of nano-silica-modified self-compacting engineered cementitious composite using response surface methodology. Construction and Building Materials, 224. pp. 796-814. ISSN 09500618

Mohammed, B.S. and Achara, B.E. and Liew, M.S. and Alaloul, W.S. and Khed, V.C. (2019) Effects of elevated temperature on the tensile properties of NS-modified self-consolidating engineered cementitious composites and property optimization using response surface methodology (RSM). Construction and Building Materials, 206. pp. 449-469. ISSN 09500618

Adamu, M. and Mohammed, B.S. and Liew, M.S. and Alaloul, W.S. (2019) Evaluating the impact resistance of roller compacted concrete containing crumb rubber and nanosilica using response surface methodology and Weibull distribution. World Journal of Engineering, 16 (1). pp. 33-43. ISSN 17085284

Al-Fakih, A. and Mohammed, B.S. and Liew, M.S. and Nikbakht, E. (2019) Incorporation of waste materials in the manufacture of masonry bricks: An update review. Journal of Building Engineering, 21. pp. 37-54. ISSN 23527102

Mohammed, B.S. and Haruna, S. and Wahab, M.M.A. and Liew, M.S. and Haruna, A. (2019) Mechanical and microstructural properties of high calcium fly ash one-part geopolymer cement made with granular activator. Heliyon, 5 (9). ISSN 24058440

Wee, S.C. and Maulianda, B. and Harolanuar, N.H. and Lee, D. and Mohshim, D.F. and Zaid, H.F.M. and Liew, M.S. and Ayoub, M.A. and Elraies, K.A. and Barati, R. (2019) Numerical modelling of free energy for methanol and water mixtures for biodiesel production. Fuel, 255. ISSN 00162361

Mohammed, B.S. and Haruna, S. and Mubarak bn Abdul Wahab, M. and Liew, M.S. (2019) Optimization and characterization of cast in-situ alkali-activated pastes by response surface methodology. Construction and Building Materials, 225. pp. 776-787. ISSN 09500618

Mohammed, B.S. and Aswin, M. and Liew, M.S. and Zawawi, N.A.W.A. (2019) Structural Performance of RC and R-ECC Dapped-End Beams Based on the Role of Hanger or Diagonal Reinforcements Combined by ECC. International Journal of Concrete Structures and Materials, 13 (1). ISSN 19760485

Alaloul, W.S. and Liew, M.S. and Wan Zawawi, N.A. and Mohammed, B.S. and Adamu, M. (2018) An Artificial neural networks (ANN) model for evaluating construction project performance based on coordination factors. Cogent Engineering, 5 (1). pp. 1-18. ISSN 23311916

Alaloul, W.S. and Loganathan, R. and Mohammed, B.S. and Hasan, E. and Nikbakht and Liew, M.S. and Khed, V. and Adamu, M. (2018) Deformation properties of concrete containing crumb rubber as partial replacement to fine aggregate. International Journal of Civil Engineering and Technology, 9 (10). pp. 317-326. ISSN 09766308

Mohammed, B.S. and Liew, M.S. and S Alaloul, W. and Al-Fakih, A. and Ibrahim, W. and Adamu, M. (2018) Development of rubberized geopolymer interlocking bricks. Case Studies in Construction Materials, 8. pp. 401-408. ISSN 22145095

Adamu, M. and Mohammed, B.S. and Liew, M.S. (2018) Effect of crumb rubber and nano silica on the creep and drying shrinkage of roller compacted concrete pavement. International Journal of GEOMATE, 15 (47). pp. 58-65. ISSN 21862982

Mohammed, B.S. and Adamu, M. and Liew, M.S. (2018) Evaluating the effect of crumb rubber and nano silica on the properties of high volume fly ash roller compacted concrete pavement using non-destructive techniques. Case Studies in Construction Materials, 8. pp. 380-391. ISSN 22145095

Mohammed, B.S. and Adamu, M. and Liew, M.S. (2018) Evaluating the static and dynamic modulus of elasticity of roller compacted rubbercrete using response surface methodology. International Journal of GEOMATE, 14 (41). pp. 186-192. ISSN 21862982

Syed, Z.I. and Liew, M.S. and Rahman, S.A. and Palaniandy, D.K. (2018) Evaluation of Failure Capacity of Offshore Riser Protectors Under Vessel Impact. Journal of Failure Analysis and Prevention, 18 (2). pp. 280-290. ISSN 15477029

Khed, V.C. and Mohammed, B.S. and Liew, M.S. and Alaloul, W.S. and Adamu, M. and Al-Fakih, A. and Karthikeyan, J. (2018) Experimental investigation on pullout strength of hybrid reinforcement of fibre in rubberized cementitious composites. International Journal of Civil Engineering and Technology, 9 (7). pp. 1612-1622. ISSN 09766308

Al-Fakih, A. and Mohammed, B.S. and Liew, M.S. and Alaloul, W.S. and Adamu, M. and Khed, V.C. and Dahim, M.A. and Al-Mattarneh, H. (2018) Mechanical behavior of rubberized interlocking bricks for masonry structural applications. International Journal of Civil Engineering and Technology, 9 (9). pp. 185-193. ISSN 09766308

Mohammed, B.S. and Khed, V.C. and Liew, M.S. (2018) Optimization of hybrid fibres in engineered cementitious composites. Construction and Building Materials, 190. pp. 24-37. ISSN 09500618

Al-Fakih, A. and Mohammed, B.S. and Liew, M.S. and Alaloul, W.S. (2018) Physical properties of the rubberized interlocking masonry brick. International Journal of Civil Engineering and Technology, 9 (6). pp. 656-664. ISSN 09766308

Mohammed, B.S. and Liew, M.S. and Alaloul, W.S. and Khed, V.C. and Hoong, C.Y. and Adamu, M. (2018) Properties of nano-silica modified pervious concrete. Case Studies in Construction Materials, 8. pp. 409-422. ISSN 22145095

Mohammed, B.S. and Achara, B.E. and Liew, M.S. (2018) The influence of high temperature on microstructural damage and residual properties of nano-silica-modified (NS-modified) self-consolidating engineering cementitious composites (SC-ECC) using response surface methodology (RSM). Construction and Building Materials, 192. pp. 450-466. ISSN 09500618

Toloue, I. and Liew, M.S. and Harahap, I.S.H. and Lee, H.E. (2018) A novel algorithm for effective vibration control of portal frames. Journal of Engineering and Technological Sciences, 50 (3). pp. 315-329. ISSN 23375779

Danyaro, K.U. and Liew, M.S. (2018) A proposed methodology for integrating oil and gas data using semantic big data technology. Lecture Notes on Data Engineering and Communications Technologies, 5. pp. 30-38. ISSN 23674512

Musa, N. and Mohammed, B.S. and Liew, M.S. and Singh, P. (2017) Flexural strength of rc beams with multiple layers of cfrp sheet. International Journal of Civil Engineering and Technology, 8 (12). pp. 134-143. ISSN 09766308

Liew, M.S. and Danyaro, K.U. and Mohamad, M. and Shawn, L.E. and Aulov, A. (2017) Ground Motion Prediction Equations for Malaysia Due to Subduction Zone Earthquakes in Sumatran Region. IEEE Access, 5. pp. 23920-23937. ISSN 21693536

Imran, M. and Liew, M.S. and Nasif, M.S. and Niazi, U.M. and Yasreen, A. (2017) Hazard assessment studies on hydrocarbon fire and blast: An overview. Advanced Science Letters, 23 (2). pp. 1243-1247. ISSN 19366612

Mohamad, M. and Liew, M.S. and Danyaro, K.U. and Lim, E.S. (2017) Implementation of attenuation equations for seismic hazard assessment in Malaysian water. Advanced Science Letters, 23 (2). pp. 1361-1365. ISSN 19366612

Teo, W. and Hing, K.L.M. and Liew, M.S. (2017) Interaction between internal shear reinforcement and external FRP systems of RC beams: Experimental study. Open Civil Engineering Journal, 11. pp. 143-152. ISSN 18741495

Mardi, N.H. and Malek, M.A. and Liew, M.S. (2017) Tsunami simulation due to seaquake at Manila Trench and Sulu Trench. Natural Hazards, 85 (3). pp. 1723-1741. ISSN 0921030X

Toloue, I. and Liew, M.S. and Harahap, I.S.H. (2017) The effect of element types on force analogy method analysis. Journal of Engineering and Technological Sciences, 49 (6). pp. 785-798. ISSN 23375779

Na, K.L. and Lee, H.E. and Liew, M.S. and Wan Abdullah Zawawi, N.A. (2017) An expert knowledge based decommissioning alternative selection system for fixed oil and gas assets in the South China Sea. Ocean Engineering, 130. pp. 645-658. ISSN 00298018

Ezechi, E.H. and Kutty, S.R.B.M. and Isa, M.H. and Liew, M.S. (2016) Application of response surface methodology for the optimization of hexavalent chromium removal using a new low-cost adsorbent. Desalination and Water Treatment, 57 (47). pp. 22507-22518. ISSN 19443994

Lee, H.E. and Liew, M.S. and Mardi, N.H. and Na, K.L. and Toloue, I. and Wong, S.K. (2016) Development of jacket platform tsunami risk rating system in waters offshore North Borneo. Journal of Marine Science and Application, 15 (3). pp. 307-320. ISSN 16719433

Alaloul, W.S. and Liew, M.S. and Zawawi, N.A.W.A. (2016) Identification of coordination factors affecting building projects performance. Alexandria Engineering Journal, 55 (3). pp. 2689-2698. ISSN 11100168

Yazid, E. and Liew, M.S. and Parman, S. and Kurian, V.J. (2016) Identification of transfer functions from surge motion response of a semisubmersible platform using time-varying NARX model. Applied Ocean Research, 54. pp. 53-66. ISSN 01411187

Kurian, V.J. and Goh, S.S. and Wahab, M.M.A. and Liew, M.S. (2015) Component reliability assessment of offshore jacket platforms. Research Journal of Applied Sciences, Engineering and Technology, 9 (1). pp. 1-10. ISSN 20407459

Imran, M. and Liew, M.S. and Nasif, M.S. (2015) Experimental studies on fire for offshore structures and its limitations: A review. Chemical Engineering Transactions, 45. pp. 1951-1956. ISSN 22839216

Kim, D.K. and Choi, H.S. and Shin, C.S. and Liew, M.S. and Yu, S.Y. and Park, K.S. (2015) Fatigue performance of deepwater SCR under short-term VIV considering various S-N curves. Structural Engineering and Mechanics, 53 (5). pp. 881-896. ISSN 12254568

Yazid, E. and Liew, M.S. and Parman, S. and Kurian, V.J. (2015) Identification of slow drift motions of a truss spar platform using parametric Volterra model. Ocean Engineering, 109. pp. 654-668. ISSN 00298018

Yazid, E. and Liew, M.S. and Parman, S. and Kurian, V.J. (2015) Improving the modeling capacity of Volterra model using evolutionary computing methods based on Kalman smoother adaptive filter. Applied Soft Computing Journal, 35. pp. 695-707. ISSN 15684946

Khan, R.A. and Liew, M.S. and Zawawi, N.A.W.A. (2015) Impulse response analysis for Malaysian construction sector by vector error correction model. Malaysian Construction Research Journal, 16 (1). pp. 1-14. ISSN 19853807

Aswin, M. and Mohammed, B.S. and Liew, M.S. and Syed, Z.I. (2015) Prediction of RC beams failure load using non-linear finite element analysis. International Journal of Applied Engineering Research, 10 (22). pp. 42974-42980. ISSN 09734562

Aswin, M. and Mohammed, B.S. and Liew, M.S. and Syed, Z.I. (2015) Root cause of reinforced concrete dapped-end beams failure. International Journal of Applied Engineering Research, 10 (22). pp. 42927-42933. ISSN 09734562

Aswin, M. and Mohammed, B.S. and Liew, M.S. and Syed, Z.I. (2015) Shear Failure of RC Dapped-End Beams. Advances in Materials Science and Engineering, 2015. ISSN 16878434

Liew, M.S. and Nordin, A.H. and Lim, E.S. and Zawawi, N.A.W.A. (2015) Wave energy spectrum for the south China sea. Marine Technology, 52 (3). pp. 15-18. ISSN 00253316

Liew, M.S. and Zawawi, N.A.W.A. (2015) The decommissioning challenge. Marine Technology, 52 (3). pp. 50-54. ISSN 00253316

Kurian, V.J. and Ng, C.Y. and Liew, M.S. (2015) An experimental investigation of the responses of classic spar platform subjected to bi-directional waves. Research Journal of Applied Sciences, Engineering and Technology, 9 (1). pp. 11-17. ISSN 20407459

Waris, M. and Liew, M.S. and Faris, M. and Idrus, A. (2015) An exploratory study on enablers and barriers for onsite mechanisation in the Malaysian construction industry. Malaysian Construction Research Journal, 16 (1). pp. 15-30. ISSN 19853807

Kurian, V.J. and Ng, C.Y. and Liew, M.S. (2015) A numerical and experimental study on motion responses of semi-submersible platforms subjected to short-crested waves. Journal of Vibration Engineering and Technologies, 3 (3). pp. 331-344. ISSN 25233920

Palaniandy, D.K. and Syed, Z.I. and Liew, M.S. and Karuppanan, S. (2014) Broadside vessel collision forces for conventional riser-guard. Applied Mechanics and Materials, 567. pp. 210-215. ISSN 16609336

Nizamani, Z. and Kurian, V.J. and Liew, M.S. (2014) Determination of environmental load factors for ISO 19902 code in offshore Malaysia using FORM structural reliability method. Ocean Engineering, 92. pp. 31-43. ISSN 00298018

Zawawi, N.A.W.A. and Lun, N.K. and Liew, M.S. (2014) Development of platform selection tool for offshore decommissioning in Malaysia. Applied Mechanics and Materials, 567. pp. 222-227. ISSN 16609336

Ng, C.Y. and Kurian, J.V. and Liew, M.S. (2014) Dynamic responses of classic spar platform: Short crested waves vs. long crested waves. Applied Mechanics and Materials, 567. pp. 235-240. ISSN 16609336

Kurian, V.J. and Al-Yacouby, A.M. and Sebastian, A.A. and Liew, M.S. and Idichandy, V.G. (2014) Effect of anodes on hydrodynamic coefficients of tubular cylinders - Model tests. Applied Mechanics and Materials, 567. pp. 241-246. ISSN 16609336

Al-Yacouby, A.M. and Kurian, J.V. and Sebastian, A.A. and Liew, M.S. and Idichandy, V.G. (2014) Effects of marine growth on hydrodynamic coefficients of rigid tubular cylinders. Applied Mechanics and Materials, 567. pp. 247-252. ISSN 16609336

Waris, M. and Liew, M.S. and Khamidi, M.F. and Idrus, A. (2014) Environmental implications of onsite mechanization in the Malaysian construction industry. WIT Transactions on Ecology and the Environment, 181. pp. 147-160. ISSN 17433541

Termizi, W.S.A. and Liew, M.S. (2014) Extreme value analysis and joint densities of wind directionality, wind speed and wave height for Malaysian waters. Advanced Materials Research, 935. pp. 159-162. ISSN 10226680

Sebastian, A.A. and Kurian, V.J. and Al-Yacouby, A.M. and Liew, M.S. and Idichandy, V.G. (2014) Hydrodynamic forces on linear and multi-dimensional arrays of circular cylinders. Applied Mechanics and Materials, 567. pp. 259-264. ISSN 16609336

Waris, M. and Liew, M.S. and Faris, M.K. and Arazi, I. (2014) Major challenges to the sustainable operations of construction equipment in Malaysia. Applied Mechanics and Materials, 567. pp. 589-594. ISSN 16609336

Kurian, V.J. and Voon, M.C. and Wahab, M.M.A. and Iskandar, N.A. and Liew, M.S. (2014) Multivariate regression analysis for screening process of reliability assessment. Applied Mechanics and Materials, 567. pp. 271-276. ISSN 16609336

Yazid, E. and Liew, M.S. and Setyamartana, P. and Kurian, V.J. and Ng, C.Y. (2014) Nonlinear system identification of floating structures using time-varying ARX-based volterra model. Applied Mechanics and Materials, 465-46. pp. 3-7. ISSN 16609336

Syed, Z.I. and Liew, M.S. and Mendis, P. (2014) Performance of simplified damage assessment tools for reinforced concrete panels under blast loading. Key Engineering Materials, 594-59. pp. 492-497. ISSN 10139826

Aswin, M. and Syed, Z.I. and Wee, T. and Liew, M.S. (2014) Prediction of failure loads of RC dapped-end beams. Applied Mechanics and Materials, 567. pp. 463-468. ISSN 16609336

Yazid, E. and Liew, M.S. and Parman, S. and Kurian, V.J. and Ng, C.Y. (2014) Prediction of surge motion response of floating structure using kalman smoother adaptive filters based time-domain volterra model. Applied Mechanics and Materials, 660. pp. 799-803. ISSN 16609336

Liew, M.S. and Zawawi, N.A.W.A. and Hashim, F.M. (2014) Raising the skills bar for deep water. Marine Technology, 51 (2). pp. 82-84. ISSN 00253316

Kurian, V.J. and Goh, S.S. and Wahab, M.M.A. and Liew, M.S. (2014) Reliability assessment model for aging jacket structures in Malaysian waters. Applied Mechanics and Materials, 567. pp. 283-288. ISSN 16609336

Wee, T. and Yin, H. and Maharun, M. and Saravanan, K. and Liew, M.S. and Salleh, A.R. and Wong, T.C. (2014) Research on HGV collisions with concrete bridge piers. Applied Mechanics and Materials, 567. pp. 648-653. ISSN 16609336

Khan, R.A. and Liew, M.S. and Bin Ghazali, Z. (2014) Service and construction sector of Malaysia: Causality link (1991-2013). Applied Mechanics and Materials, 567. pp. 619-624. ISSN 16609336

Syed, Z.I. and Liew, M.S. and Hasan, M.H. and Venkatesan, S. (2014) Single-degree-of-freedom based pressure-impulse diagrams for blast damage assessment. Applied Mechanics and Materials, 567. pp. 499-504. ISSN 16609336

Albarody, T.M.B. and Mustaffa, Z.B. and Liew, M.S. (2014) Smart and robust composite tube columns frames for offshore sub-structure construction. Advanced Materials Research, 983. pp. 11-15. ISSN 10226680

Rahman, S.A. and Syed, Z.I. and John, K.V. and Liew, M.S. (2014) Structural response of offshore blast walls under accidental explosion. Advanced Materials Research, 1043. pp. 278-282. ISSN 10226680

Kurian, V.J. and Voon, M.C. and Wahab, M.M.A. and Liew, M.S. (2014) System reliability assessment of existing jacket platforms in Malaysian waters. Research Journal of Applied Sciences, Engineering and Technology, 8 (23). pp. 2305-2314. ISSN 20407459

Kurian, V.J. and Wahab, M.M.A. and Kheang, T.S. and Liew, M.S. (2014) System reliability of existing jacket platform in Malaysian water (failure path and system reliability index). Applied Mechanics and Materials, 567. pp. 307-312. ISSN 16609336

Kim, D.K. and Liew, M.S. and Youssef, S.A.M. and Mohd, M.H. and Kim, H.B. and Paik, J.K. (2014) Time-Dependent Ultimate Strength Performance of Corroded FPSOs. Arabian Journal for Science and Engineering, 39 (11). pp. 7673-7690. ISSN 2193567X

Kurian, V.J. and Sebastian, A.A. and Al-Yacouby, A.M. and Liew, M.S. and Idichandy, V.G. (2014) Wave forces on linear arrays of rigid vertical circular cylinders in regular waves. Research Journal of Applied Sciences, Engineering and Technology, 7 (24). pp. 5249-5257. ISSN 20407459

Eik, L.H. and Liew, M.S. (2014) A study on the structural failure mechanism and reserve strength ratio of Tarpon monopods. Applied Mechanics and Materials, 567. pp. 191-196. ISSN 16609336

Yazid, E. and Liew, M.S. and Parman, S. and Kurian, V.J. and Ng, C.Y. (2013) Application of EMD-based TVAR model for modal analysis of semi-submersibles. International Journal of Mechanics, 7 (4). pp. 484-491. ISSN 19984448

Kurian, V.J. and Ng, C.Y. and Liew, M.S. (2013) Dynamic responses of truss spar due to wave actions. Research Journal of Applied Sciences, Engineering and Technology, 5 (3). pp. 812-818. ISSN 20407459

Kurian, V.J. and Nizamani, Z. and Liew, M.S. (2013) Modelling for uncertainties in resistance for jacket platforms in Malaysia. Research Journal of Applied Sciences, Engineering and Technology, 5 (3). pp. 750-759. ISSN 20407459

Yew, G.Z. and Lim, E.S. and Liew, M.S. and Ng, C.Y. (2013) System identification of a six-legged semisubmersible subjected to wave loads through frequency domain analysis. Applied Mechanics and Materials, 373-37. pp. 770-784. ISSN 16609336

Danyaro, K.U. and Jaafar, J. and Liew, M.S. (2012) Completeness knowledge representation in fuzzy description logics. Communications in Computer and Information Science, 295 CC. pp. 164-173. ISSN 18650929

Potty, N.S. and Ting, O.S. and Liew, M.S. (2012) Study of marine structural corrosion using corrosion coupons in lumut area. Malaysian Journal of Science, 31 (1). pp. 56-73. ISSN 13943065

Yazid, E. and Liew, M.S. and Parman, S. (2012) Time-varying spectrum estimation of offshore structure response based on a time-varying autoregressive model. Journal of Applied Sciences, 12 (23). pp. 2383-2389. ISSN 18125654

Liew, M.S. and Shamsuddin, A.H. and Yew, G.Z. (2011) Fiber resin matrix composites: Nature's gift. WIT Transactions on Ecology and the Environment, 148. pp. 131-140. ISSN 17433541

Wan, S. and Vallyutham, K. and Liew, M.S. and Potty, N.S. (2011) The effects of partial replacement of cement in cement mortar and brick by microwave incinerated rice husk ash (MIRHA). WIT Transactions on Ecology and the Environment, 148. pp. 87-94. ISSN 17433541

Conference or Workshop Item

Alawag, A.M. and Liew, M.S. and Alaloul, W.S. and Alkhatib, F. and Baarimah, A.O. (2024) Artificial intelligence in the smart construction industry: A review of the existing state, challenges, and future threats. In: UNSPECIFIED.

Alawag, A.M. and Liew, M.S. and Alaloul, W.S. and Baarimah, A.O. and Alsalaheen, M. (2024) Implementation of industrial revolution 4.0 toward successful practices of total quality management in the sustainable construction industry. In: UNSPECIFIED.

Baarimah, A.O. and Alaloul, W.S. and Liew, M.S. and Al-Aidrous, A.-H.M.H. and Alawag, A.M. (2024) Post-disaster reconstruction projects: Insights from the construction industry in developing countries. In: UNSPECIFIED.

Baarimah, A.O. and Gartoumi, K.I. and Alaloul, W.S. and Liew, M.S. and Alawag, A.M. and Bahamid, R.A. (2023) Applications of Heritage Building Information Modeling (HBIM): A Bibliometric Review and Future Trends. In: UNSPECIFIED.

Baarimah, A.O. and Alaloul, W.S. and Liew, M.S. and Alawag, A.M. and Bazel, M.A. and Mushtaha, A.W. (2023) Current State and Future of Building Information Modeling for Sustainable Heritage Buildings. In: UNSPECIFIED.

Alawag, A.M. and Alaloul, W.S. and Liew, M.S. and Al-Awag, E.A. and Baarimah, A.O. and Omer, M.M. (2023) Incorporating the Applications of Building Information Modeling (BIM) Technology in the Sustainable Retrofitting of Heritage Buildings: A Systematic Review. In: UNSPECIFIED.

Al-Awag, A.M. and Alaloul, W.S. and Liew, M.S. and Baarimah, A.O. and Musarat, M.A. (2023) The potential role of industrialized building systems (IBS) in Malaysian sustainable construction: Awareness and barriers. In: UNSPECIFIED.

Alawag, A.M. and Alaloul, W.S. and Liew, M.S. and Al-Ashmori, A. and Alqadami, A.T. and Ammad, S. (2022) Application of Industrialised Building System in the Field of Construction toward Sustainability: Future Routes and a Theoretical Mapping. In: UNSPECIFIED.

Wan Muhaimin, W.F.A.B. and Liew, M.S. and Abdullah Zawawi, N.A.B.W. and Shawn, L.E. and Al Sheikh, A.K. and Bin Salim, S.M.Y. and Danyaro, K.U. (2022) An Investigation on the Influence of Structural Damage on Eigenvalue Characteristics and Reserve Strength Ratio of Onshore Lattice Steel Structures. In: UNSPECIFIED.

Bartholomew, E.K. and Lim, E.S. and Toloue, I. and Liew, M.S. and Danyaro, K.U. and Chan, K.M. and Ling, S.W. (2022) Physics-Based Structural Health Monitoring Digital Twin for Seismically Vulnerable Fixed Offshore Structures. In: UNSPECIFIED.

Danyaro, K.U. and Liew, M.S. (2022) Semantic Web for Meteorological and Oceanographic Data. In: UNSPECIFIED.

Baarimah, A.O. and Alaloul, W.S. and Liew, M.S. and Alawag, A.M. and Musarat, M.A. and Alzubi, K.M. (2021) Current State of Post-Disaster Reconstruction Projects: A Bibliometric Analysis. In: UNSPECIFIED.

Mohd, S.S.R. and Liew, M.S. and Zawaw, N.A.W.A. and Farhan, S.A. and Shafiq, N. (2021) Green-Building-Index-Assessment-Criteria-Based Comparative Evaluation of Interlocking Blocks as an Alternative to Conventional Masonry for Residential Buildings in Malaysia. In: UNSPECIFIED.

Mohsen, A. and Alaloul, W.S. and Liew, M.S. and Musarat, M.A. and Baarimah, A.O. and Alzubi, K.M. and Altaf, M. (2021) Impact of the COVID-19 Pandemic on Construction Industry in Malaysia. In: UNSPECIFIED.

Baarimah, A.O. and Alaloul, W.S. and Liew, M.S. and Al-Aidrous, A.-H.M.H. and Alawag, A.M. and Musarat, M.A. (2021) Integration of Building Information Modeling (BIM) and Value Engineering in Construction Projects: A Bibliometric Analysis. In: UNSPECIFIED.

Altaf, M. and Alaloul, W.S. and Khan, S. and Liew, M.S. and Musarat, M.A. and Mohsen, A.A. (2021) Value Analysis in Construction Projects with BIM implementation: A Systematic Review. In: UNSPECIFIED.

Abdullah Zawawi, N.A.W. and Liew, M.S. and Alaloul, W.S. and Shawn, L.E. and Imran, M. and Toloue, I. (2020) Non-destructive testing techniques for offshore underwater decommissioning projects through cutting detection: A state of review. In: UNSPECIFIED.

Abdullah Zawawi, N.A.W. and Liew, M.S. and Shawn, L.E. and Alaloul, W.S. and Toloue, I. and Mohd, M.H. and Rahman, M.A.A. and Nazri, M.N. and Tan, C.-H. and Mohamad, Y. and Lim, C.-S. and Mustapa, B. and Shaari, H. and Hii, Y.-S. and Nasahie Akbar Ali, M. and Izzat Thiyauddin, M. and Karim, M.A. (2020) Potential of offshore structure as artificial reefs in shallow tropical water. In: UNSPECIFIED.

Alawag, A.M. and Salah Alaloul, W. and Liew, M.S. and Al-Aidrous, A.-H.M.H. and Saad, S. and Ammad, S. (2020) Total Quality Management Practices and Adoption in Construction Industry Organizations: A Review. In: UNSPECIFIED.

Patel, M.S. and Liew, M.S. and Mustaffa, Z. and Al-Yacouby, A.M. and Abdurrasheed, A.S. and Whyte, A. (2019) Downtime Cost Analysis of Offloading Operations Considering Vessel Motions and Mooring Responses in Malaysian Waters. In: UNSPECIFIED.

Lim, E.S. and Lee, H.E. and Liew, M.S. (2019) Forensic investigation of a slender high-rise structure subject to dynamic wind conditions. In: UNSPECIFIED.

Lim, E.S. and Liew, M.S. (2019) Nonlinear System Identification of Structures Subject to Stochastic Loadings. In: UNSPECIFIED.

Alaloul, W.S. and Alfaseeh, A.S. and Tayeh, B.A. and Zawawi, N.A.W.A. and Liew, M.S. (2019) Reconstruction of residential buildings post-disaster: A comparison of influencing factors. In: UNSPECIFIED.

Alaloul, W.S. and Liew, M.S. and Wan Zawawi, N.A. (2018) Communication, coordination and cooperation in construction projects: Business environment and human behaviours. In: UNSPECIFIED.

Imran, M. and Liew, M.S. and Garcia, E.M. and Nasif, M.S. and Yassin, A.Y.M. and Niazi, U.M. (2018) Deformation and Heat Transfer on Three Sides Protected Beams under Fire Accident. In: UNSPECIFIED.

Abdullah, M.S. and Alaloul, W.S. and Liew, M.S. and Mohammed, B.S. (2018) Delays and Cost Overruns Causes during Construction of Palm Oil Refinery Projects. In: UNSPECIFIED.

Mazlina, M. and Liew, M.S. and Adnan, A. and Harahap, I.S.H. and Hamid, N.A. (2018) Determination of Shear Wave Velocity in Offshore Terengganu for Ground Response Analysis. In: UNSPECIFIED.

Yong, H.Y. and Liew, M.S. and Ovinis, M. and Danyaro, K.U. and Lim, E.S. (2018) Hydrodynamic study of free standing drilling risers under typhoon generated swell. In: UNSPECIFIED.

Alaloul, W.S. and Liew, M.S. and Zawawi, N.A.W.A. and Mohammed, B.S. (2018) Industry Revolution IR 4.0: Future Opportunities and Challenges in Construction Industry. In: UNSPECIFIED.

Irawan, R. and Liew, M.S. and Ali, M.O.A. and Al Yacouby, A.M. (2018) Prediction of dynamic responses of floating structures using NARX with mirroring technique. In: UNSPECIFIED.

Raf'Ee, S.S. and Liew, M.S. and Zawawi, N.A. and Danyaro, K.U. (2018) A Structured Review on the Improvement of GBI-RNC. In: UNSPECIFIED.

Raf'Ee, S.S. and Liew, M.S. and Zawawi, N.A. and Danyaro, K.U. (2018) Thermal Insulation of Residential Construction through the Study of Temperature Difference of Bricks. In: UNSPECIFIED.

Imran, M. and Liew, M.S. and Nasif, M.S. and Gracia, E.M. and Danyaro, K.U. and Niazi, M.U. (2018) Thermal and Mechanical Response of Partially Protected Steel I-Beam under Fire. In: UNSPECIFIED.

Salim, W.S.W. and Liew, M.S. and Shafie, A. (2018) An evaluation of the outcomes probabilities of roadway bridge defect model using Event Tree method. In: UNSPECIFIED.

Toloue, I. and Liew, M.S. and Harahap, I.S.H. and Lee, H.E. (2018) A novel approach to enhance the accuracy of vibration control of Frames. In: UNSPECIFIED.

Lee, H.E. and Liew, M.S. and Zawawi, N.A.W.A. and Toloue, I. (2017) Heave motion prediction of a large barge in random seas by using artificial neural network. In: UNSPECIFIED.

Ayilara, A.Q. and Liew, M.S. (2017) Impact of the Overloading of Heavy Goods Vehicles on the Fatigue Life of Steel Bridges. In: UNSPECIFIED.

Chai, K. and Liew, M.S. and Lee, H.E. (2017) Numerical wave tank modelling of regular waves propagation using OpenFOAM. In: UNSPECIFIED.

Lun, N.K. and Liew, M.S. and Matori, A.N. and Zawawi, N.A.W.A. (2017) Recent developments in machine learning applications in landslide susceptibility mapping. In: UNSPECIFIED.

Ayilara, A.Q. and Wee, T. and Liew, M.S. (2016) Application of new codes for fatigue assessment of older bridges. In: UNSPECIFIED.

Alaloul, W.S. and Liew, M.S. and Zawawi, N.A. (2016) Attributes of coordination process in construction projects. In: UNSPECIFIED.

Alaloul, W.S. and Liew, M.S. and Zawawi, N.A. (2016) Coordination process in construction projects management. In: UNSPECIFIED.

Rini, N. and Kurian, V.J. and Liew, M.S. and Whyte, A. (2016) Coupled analysis for the effect of wave height on FPSO motions. In: UNSPECIFIED.

Al-Ghuribi, T.M.Q. and Liew, M.S. and Zawawi, N.A. and Ayoub, M.A. (2016) Decommissioning decision criteria for offshore installations and well abandonment. In: UNSPECIFIED.

Kurian, V.J. and Rini, N. and Liew, M.S. and Whyte, A. (2016) FPSO response and water depth: A study using model tests. In: UNSPECIFIED.

Wan Salim, W.S. and Liew, M.S. and Shafie, A. (2016) Fault tree analysis for reinforced concrete highway bridge defect. In: UNSPECIFIED.

Alaloul, W.S. and Liew, M.S. and Zawawi, N.A.B. (2016) A Framework for Coordination Process into Construction Projects. In: UNSPECIFIED.

Wahab, M.M.A. and Kurian, V.J. and Liew, M.S. and Nizamani, Z. and Kim, D.K. (2016) Structural reliability analysis using quadratic polynomial response surface and finite element in MATLAB. In: UNSPECIFIED.

Al-Yacouby, A.M. and Kurian, V.J. and Liew, M.S. and Idichandy, V.G. (2016) VIV of four cylinders in side by side configurations � experimental and CFD simulations. In: UNSPECIFIED.

Kurian, V.J. and Al-Yacouby, A.M. and Sebastian, A.A. and Liew, M.S. and Idichandy, V.G. (2015) Effect of sacrificial anodes and marine growth on hydrodynamic coefficients of rigid cylinders. In: UNSPECIFIED.

Kim, D.K. and Liew, M.S. and Yu, S.Y. and Park, K.S. and Choi, H.S. (2015) Method for estimating soft clay type seabed embedment by pipeline movement. In: UNSPECIFIED.

Alaloul, W.S. and Liew, M.S. and Wan Abdullah Zawawi, N.A. (2015) The characteristics of coordination process in construction projects. In: UNSPECIFIED.

Syed, Z.I. and Palaniandy, D.K. and Liew, M.S. (2014) Damage assessment of offshore riser-guards under accidental vessel impact. In: UNSPECIFIED.

Kurian, V.J. and Al-Yacouby, A.M. and Sebastian, A.A. and Liew, M.S. and Idichandy, V.G. (2014) Hydrodynamic coefficients for array of tubular cylinders. In: UNSPECIFIED.

Danyaro, K.U. and Jaafar, J. and Liew, M.S. (2014) MetOcean data to linked data. In: UNSPECIFIED.

Yazid, E. and Liew, M.S. and Parman, S. and Kurian, V.J. and Ng, C.Y. (2014) Nonlinear system identification via basis functions based time domain volterra model. In: UNSPECIFIED.

Albarody, T.M.B. and Bt Mustaffa, Z. and Liew, M.S. and Toloue, I. and Setvati, M.R. (2014) A composite steel plate shear walls for offshore constructions. In: UNSPECIFIED.

Kurian, V.J. and Nizamani, Z. and Liew, M.S. (2013) Bayesian updating for probability of failure of jacket platforms in. In: UNSPECIFIED.

Kurian, V.J. and Nizamani, Z. and Mohamed, M.A.W. and Liew, M.S. (2013) Component, joint and system based environmental load factor for jacket platforms in Malaysia. In: UNSPECIFIED.

Kurian, V.J. and Ng, C.Y. and Liew, M.S. (2013) Effect of short-crested waves on the dynamic responses of truss spar platforms. In: UNSPECIFIED.

Wan Abdullah Zawawi, N.A. and Liew, M.S. and Na, K.L. and Idrus, H. (2013) Engineering the civil engineering education: A capstone case study in a Malaysian university. In: UNSPECIFIED.

Kurian, V.J. and Ng, C.Y. and Liew, M.S. (2013) A study on motion responses of classic spar platforms subjected to short crested waves. In: UNSPECIFIED.

Lun, N.K. and Zawawi, N.A.W.A. and Liew, M.S. (2012) Conceptual framework: Semi-PSS for sustainable decommissioning of offshore platforms in Malaysia. In: UNSPECIFIED.

Zawawi, N.A.W.A. and Liew, M.S. and Na, K.L. (2012) Decommissioning of offshore platform: A sustainable framework. In: UNSPECIFIED.

Kurian, V.J. and Ng, C.Y. and Liew, M.S. (2012) Dynamic responses of classic spar platforms subjected to long crested waves: Morison equation vs. diffraction theory. In: UNSPECIFIED.

Mohamed, M.A.W. and Montasir, O.A. and Kurian, V.J. and Liew, M.S. (2012) Effects of mooring line failure on the wave frequency responses of truss spar platforms. In: UNSPECIFIED.

Kurian, V.J. and Ng, C.Y. and Liew, M.S. (2012) Experimental investigation on dynamic responses of spar platforms subjected to multi-directional waves. In: UNSPECIFIED.

Kurian, V.J. and Ng, C.Y. and Liew, M.S. (2012) Numerical investigation on dynamic responses of classic spar platforms: Long crested waves vs. short crested waves. In: UNSPECIFIED.

Cossa, N.J. and Potty, N.S. and Liew, M.S. (2012) Post-processor program for ISO-19902 tubular joints design. In: UNSPECIFIED.

Danyaro, K.U. and Jaafar, J. and Liew, M.S. (2012) An RDF model for meteorological and oceanographic information systems. In: UNSPECIFIED.

Yazid, E. and Liew, M.S. and Parman, S. (2012) Simulated field measurements based response amplitude operators estimation via the TVAR model. In: UNSPECIFIED.

Wahap, M.Z.A. and Liew, M.S. and Abdullah, M.N. (2012) Spectral analysis of sea state wave and influence of autocovariance and smoothing parameter. In: UNSPECIFIED.

Kurian, V.J. and Nizamani, Z. and Liew, M.S. (2012) Statistical modelling of environmental load uncertainty for jacket platforms in Malaysia. In: UNSPECIFIED.

Kurian, V.J. and Montasir, O.A. and Liew, M.S. (2012) Truss spar platform motions for combined wave, current and wind forces. In: UNSPECIFIED.

Ng, C.Y. and Kurian, V.J. and Liew, M.S. (2011) Experimental investigation for the responses of semi-submersible platform subjected to bidirectional waves. In: UNSPECIFIED.

Mayeetae, Z. and Liew, M.S. and John, K.V. (2011) Parametric study on environmetal loads of hindcast and measured full scale data. In: UNSPECIFIED.

Ting, O.S. and Potty, N.S. and Liew, M.S. (2011) Prediction of corrosion rates in marine and offshore structures. In: UNSPECIFIED.

Tuhaijan, S.N.A.B. and John, K.V. and Liew, M.S. (2011) Wave-current interaction on offshore spar platforms. In: UNSPECIFIED.

Danyaro, K.U. and Jaafar, J. and Liew, M.S. (2011) A proposed methodology for Semantic Web implementation. In: UNSPECIFIED.

Hamzah, H.F. and Wee, T. and Liew, M.S. (2011) A review of seismic assessment of reinforced concrete structure using pushover analysis. In: UNSPECIFIED.

Shafie, N. and Shahdan, T.N.T. and Liew, M.S. (2010) Mastery Learning Assessment Model (MLAM) in teaching and learning mathematics. In: UNSPECIFIED.

Book

Liew, M.S. and Nguyen-Tri, P. and Nguyen, T.A. and Kakooei, S. (2019) Smart nanoconcretes and cement-based materials: Properties, modelling and applications. Elsevier Inc., pp. 1-706. ISBN 9780128178553; 9780128178546

Jaafar, J. and Danyaro, K.U. and Liew, M.S. (2015) Web intelligence: A fuzzy knowledge-based framework for the enhancement of querying and accessing web data. IGI Global, pp. 83-104. ISBN 9781466685062; 1466685050; 9781466685055