Liaw, K.L. and Kurnia, J.C. and Sallih, N. and Mustapha, M. and Sasmito, A.P. (2024) Heat transfer analysis of subcooled flow boiling in copper foam helical coiled heat exchanger � A pore-scale numerical study. International Communications in Heat and Mass Transfer, 155. ISSN 07351933

Liaw, K.L. and Rosle, A.F.H.B. and Hendarti, R. and Kurnia, J.C. (2024) Thermal Performance Evaluation of Heat Sink with  Pin Fin, Metal Foam and Dielectric Coolant. Lecture Notes in Mechanical Engineering. pp. 35-49. ISSN 21954356

Liaw, K.L. and Ahmadihosseini, A. and Rosle, A.F.H.B. and Kurnia, J.C. and Sasmito, A.P. (2023) Enhanced performance of pinned metal foam heat sinks with dielectric coolant � A pore-scale numerical study. International Communications in Heat and Mass Transfer, 149.

Liaw, K.L. and Kurnia, J.C. and Putra, Z.A. and Aziz, M. and Sasmito, A.P. (2023) Enhanced turbulent convective heat transfer in helical twisted Multilobe tubes. International Journal of Heat and Mass Transfer, 202.

Liaw, K.L. and Ong, K.C. and Mohd Ali Zar, M.A.B. and Lai, W.K. and Muhammad, M.F.B. and Firmansyah and Kurnia, J.C. (2023) Experimental and numerical investigation of an innovative non-combustion impulse gas turbine for micro-scale electricity generation. Energy, 266.

Al-Kayiem, H.H. and Effendy, M. and Riyadi, T.W.B. and Kurnia, J.C. and Morganadus, A. (2023) Influence of Life Green Wall and Roof Shedding on the Internal Thermal Condition of Buildings: Case Study in Malaysia. Lecture Notes in Mechanical Engineering. pp. 35-45.

Haryoko, L.A.F. and Kurnia, J.C. and Abd Majid, M.A. (2023) Investigation of Heat Transfer Enhancement of a Planar Latent Heat Thermal Energy Storage. Lecture Notes in Mechanical Engineering. pp. 217-225.

Haryoko, L.A.F. and Sasmito, A.P. and Kurnia, J.C. (2023) Numerical Investigation of Laminar Convective Heat Transfer of Nanofluid in Parallel Cooling Channels. Lecture Notes in Mechanical Engineering. pp. 249-262.

Liaw, K.L. and Kurnia, J.C. and Lai, W.K. and Ong, K.C. and Zar, M.A.B.M.A. and Muhammad, M.F.B. and Firmansyah (2023) Optimization of a novel impulse gas turbine nozzle and blades design utilizing Taguchi method for micro-scale power generation. Energy, 282.

Riyandwita, B.W. and Kurnia, J.C. and Hastuty, S. and Barrinaya, M.A. (2023) Performance Evaluation of Thermal Energy Storage with Phase Change Material in Smooth and Expanded Pipe Flow Using Numerical Simulation. Lecture Notes in Mechanical Engineering. pp. 227-236.

Kurnia, J.C. and Chaedir, B. and Wijayanta, A.T. and Sasmito, A.P. (2022) Convective Heat Transfer Enhancement of Laminar Herschel�Bulkley Non-Newtonian Fluid in Straight and Helical Heat Exchangers with Twisted Tape Inserts. Industrial and Engineering Chemistry Research, 61 (1). pp. 814-844. ISSN 08885885

Kurnia, J.C. and Ahmadihosseini, A. and Sasmito, A.P. (2022) Flow behavior and mixing of single-phase laminar Newtonian miscible fluid in T-junction micromixer with twisted mixing channel - A numerical study. Chemical Engineering and Processing - Process Intensification, 181. ISSN 02552701

Kurnia, J.C. and Shatri, M.S. and Putra, Z.A. and Zaini, J. and Caesarendra, W. and Sasmito, A.P. (2022) Geothermal energy extraction using abandoned oil and gas wells: Techno-economic and policy review. International Journal of Energy Research, 46 (1). pp. 28-60. ISSN 0363907X

Soomro, A.A. and Mokhtar, A.A. and Kurnia, J.C. and Lashari, N. and Lu, H. and Sambo, C. (2022) Integrity assessment of corroded oil and gas pipelines using machine learning: A systematic review. Engineering Failure Analysis, 131. ISSN 13506307

Ting, S.Y.Y. and Liaw, K.L. and Kurnia, J.C. (2022) Investigation on the Effect of Nanoparticle Diameter and Concentration on the Performance of Nanofluid Solar Pond. In: UNSPECIFIED.

Liaw, K.L. and Kurnia, J.C. and Sasmito, A.P. (2022) Laminar convective heat transfer in helical twisted multilobe tubes. Case Studies in Thermal Engineering, 39. ISSN 2214157X

Liaw, K.L. and Kurnia, J.C. (2022) Numerical Investigation of Boiling Flow in Oval Tube with Different Ellipticity. In: UNSPECIFIED.

Kurnia, J.C. and Haryoko, L.A.F. and Taufiqurrahman, I. and Chen, L. and Jiang, L. and Sasmito, A.P. (2022) Optimization of an innovative hybrid thermal energy storage with phase change material (PCM) wall insulator utilizing Taguchi method. Journal of Energy Storage, 49. ISSN 2352152X

Chin, A.R. and Kurnia, J.C. and Sasmito, A.P. (2022) Pore-Scale Modelling in Metal Foam Heat Exchanger. In: UNSPECIFIED.

Agson-Gani, P.H. and Zueter, A.F. and Xu, M. and Ghoreishi-Madiseh, S.A. and Kurnia, J.C. and Sasmito, A.P. (2022) Thermal and hydraulic analysis of a novel double-pipe geothermal heat exchanger with a controlled fractured zone at the well bottom. Applied Energy, 310. ISSN 03062619

Soomro, A.A. and Mokhtar, A.A. and Kurnia, J.C. and Lashari, N. and Sarwar, U. and Jameel, S.M. and Inayat, M. and Oladosu, T.L. (2022) A review on Bayesian modeling approach to quantify failure risk assessment of oil and gas pipelines due to corrosion. International Journal of Pressure Vessels and Piping, 200. ISSN 03080161

Chaedir, B.A. and Kurnia, J.C. and Sasmito, A.P. and Mujumdar, A.S. (2021) Advances in dewatering and drying in mineral processing. Drying Technology, 39 (11). pp. 1667-1684. ISSN 07373937

Kurnia, J.C. and Sasmito, A.P. (2021) Catalyst special issue on catalytic reactors design for industrial applications. Catalysts, 11 (4). ISSN 20734344

Medhi, N.S. and Haryoko, L.A.F. and Kurnia, J.C. (2021) Numerical Investigation of Electronic Cooling with Phase Change Material. Lecture Notes in Mechanical Engineering, 46. pp. 451-461. ISSN 21954356

Kurnia, J.C. and Putra, Z.A. and Muraza, O. and Ghoreishi-Madiseh, S.A. and Sasmito, A.P. (2021) Numerical evaluation, process design and techno-economic analysis of geothermal energy extraction from abandoned oil wells in Malaysia. Renewable Energy, 175. pp. 868-879. ISSN 09601481

Kurnia, J.C. and Chaedir, B.A. and Sasmito, A.P. and Shamim, T. (2021) Progress on open cathode proton exchange membrane fuel cell: Performance, designs, challenges and future directions. Applied Energy, 283. ISSN 03062619

Azlan, F. and Kurnia, J.C. and Tan, B.T. and Ismadi, M.-Z. (2021) Review on optimisation methods of wind farm array under three classical wind condition problems. Renewable and Sustainable Energy Reviews, 135. ISSN 13640321

Liaw, K.L. and Kurnia, J.C. and Sasmito, A.P. (2021) Turbulent convective heat transfer in helical tube with twisted tape insert. International Journal of Heat and Mass Transfer, 169. ISSN 00179310

Kalantari, H. and Ghoreishi-Madiseh, S.A. and Kurnia, J.C. and Sasmito, A.P. (2021) An analytical correlation for conjugate heat transfer in fin and tube heat exchangers. International Journal of Thermal Sciences, 164. ISSN 12900729

Kee, L.H. and Kurnia, J.C. and Haryoko, L.A.F. and Riyandwita, B.W. and Sasmito, A.P. (2020) Experimental investigation of the performance of thermal energy storage with embedded phase change materials as wall insulator. In: UNSPECIFIED.

Haryoko, L.A.F. and Kurnia, J.C. and Sasmito, A.P. (2020) Forced convection boiling heat transfer inside helically-coiled heat exchanger. In: UNSPECIFIED.

Kurnia, J.C. and Ghoreishi-Madiseh, S.A. and Sasmito, A.P. (2020) Heat Transfer and Entropy Generation in Concentric/Eccentric Double-Pipe Helical Heat Exchangers. Heat Transfer Engineering, 41 (18). pp. 1552-1575. ISSN 01457632

Kurnia, J.C. and Chaedir, B.A. and Sasmito, A.P. (2020) Laminar convective heat transfer in helical tube with twisted tape insert. International Journal of Heat and Mass Transfer, 150. ISSN 00179310

Al-Kayiem, H.H. and Lim, D.C. and Kurnia, J.C. (2020) Large eddy simulation of near-wall turbulent flow over streamlined riblet-structured surface for drag reduction in a rectangular channel. Thermal Science, 24. pp. 2793-2808. ISSN 03549836

Templeton, J.D. and Ghoreishi-Madiseh, S.A. and Hassani, F.P. and Sasmito, A.P. and Kurnia, J.C. (2020) Numerical and experimental study of transient conjugate heat transfer in helical closed-loop geothermal heat exchangers for application of thermal energy storage in backfilled mine stopes. International Journal of Energy Research, 44 (12). pp. 9609-9616. ISSN 0363907X

Haryoko, L.A.F. and Kurnia, J.C. and Sasmito, A.P. (2020) Numerical investigation of subcooled boiling heat transfer in helically-coiled tube. International Journal of Automotive and Mechanical Engineering, 17 (1). pp. 7675-7686. ISSN 22298649

Chaedir, B.A. and Kurnia, J.C. and Chen, L. and Jiang, L. and Sasmito, A.P. (2020) Numerical investigation of ventilation air methane catalytic combustion in circular straight and helical coil channels with twisted tape insert in catalytic-monolith reactors. Catalysts, 10 (7). pp. 1-25. ISSN 20734344

Kurnia, J.C. and Sasmito, A.P. (2020) Performance Evaluation of Liquid Mixing in a T-Junction Passive Micromixer with a Twisted Tape Insert. Industrial and Engineering Chemistry Research, 59 (9). pp. 3904-3915. ISSN 08885885

Appasamy, J.S. and Kurnia, J.C. and Assadi, M.K. (2020) Synthesis and evaluation of nitrogen-doped titanium dioxide/single walled carbon nanotube-based hydrophilic self-cleaning coating layer for solar photovoltaic panel surface. Solar Energy, 196. pp. 80-91. ISSN 0038092X

Dwinanda, R.P. and Haryoko, L.A.F. and Kurnia, J.C. (2020) The effect of epoxy and non-epoxy coating treatment on the corrosion of low carbon steel in sodium chloride solutions. In: UNSPECIFIED.

Nawi, N.I.M. and Bilad, M.R. and Anath, G. and Nordin, N.A.H. and Kurnia, J.C. and Wibisono, Y. and Arahman, N. (2020) The water flux dynamic in a hybrid forward osmosis-membrane distillation for produced water treatment. Membranes, 10 (9). pp. 1-13. ISSN 20770375

Kurnia, J.C. and Sasmito, A.P. and Shamim, T. (2019) Advances in proton exchange membrane fuel cell with dead-end anode operation: A review. Applied Energy, 252. ISSN 03062619

Inayat, M. and Sulaiman, S.A. and Kurnia, J.C. and Naz, M.Y. (2019) Catalytic and noncatalytic gasification of wood�coconut shell blend under different operating conditions. Environmental Progress and Sustainable Energy, 38 (2). pp. 688-698. ISSN 19447442

Inayat, M. and Sulaiman, S.A. and Kurnia, J.C. (2019) Catalytic co-gasification of coconut shells and oil palm fronds blends in the presence of cement, dolomite, and limestone: Parametric optimization via Box Behnken Design. Journal of the Energy Institute, 92 (4). pp. 871-882. ISSN 17439671

Inayat, M. and Sulaiman, S.A. and Kurnia, J.C. and Shahbaz, M. (2019) Effect of various blended fuels on syngas quality and performance in catalytic co-gasification: A review. Renewable and Sustainable Energy Reviews, 105. pp. 252-267. ISSN 13640321

Kurnia, J.C. and Lim, D.C. and Chen, L. and Jiang, L. and Sasmito, A.P. (2019) Entropy generation and heat transfer performance in microchannel cooling. Entropy, 21 (2). ISSN 10994300

Kurnia, J.C. and Sasmito, A.P. (2019) Hydrogen fuel cell in vehicle propulsion: Performance, efficiency, and challenge. Springer Singapore, pp. 9-26. ISBN 9789811501029; 9789811501012

Kurnia, J.C. and Chaedir, B.A. and Lim, D.C. and Chen, L. and Jiang, L. and Sasmito, A.P. (2019) Numerical evaluation of potential catalyst savings for ventilation air methane catalytic combustion in helical coil reactors with selective wall coating. Catalysts, 9 (4). ISSN 20734344

Fong, M. and Alzoubi, M.A. and Kurnia, J.C. and Sasmito, A.P. (2019) On the performance of ground coupled seasonal thermal energy storage for heating and cooling: A Canadian context. Applied Energy, 250. pp. 593-604. ISSN 03062619

Cheng, S.W.Y. and Kurnia, J.C. and Ghoreishi-Madiseh, S.A. and Sasmito, A.P. (2019) Optimization of geothermal energy extraction from abandoned oil well with a novel well bottom curvature design utilizing Taguchi method. Energy, 188. ISSN 03605442

Fong, M. and Alzoubi, M. and Sasmito, A.P. and Kurnia, J.C. (2019) Performance evaluation of ground-coupled seasonal thermal energy storage with high resolution weather data: Case study of Calgary Canada. In: UNSPECIFIED.

Adi Putra, Z. and Kurnia, J.C. and Sasmito, A.P. and Muraza, O. (2019) Process design and techno-economic analysis of ethyl levulinate production from carbon dioxide and 1,4-butanediol as an alternative biofuel and fuel additive. International Journal of Energy Research, 43 (11). pp. 5932-5945. ISSN 0363907X

Templeton, J.D. and Ghoreishi-Madiseh, S.A. and Hassani, F.P. and Sasmito, A.P. and Kurnia, J.C. (2019) Study of transient conjugate heat transfer in helical closed-loop geothermal heat exchangers for application of thermal energy storage in backfilled mine stopes. In: UNSPECIFIED.

Appasamy, J.S. and Kurnia, J.C. (2019) Synthesis and Evaluation of Novel TiO2-based Self-cleaning Coating Layer for Buildings. In: UNSPECIFIED.

Kurnia, J.C. and Xu, P. and Sasmito, A.P. and Mujumdar, A.S. (2019) Thermal drying utilizing intermittent and pulsating impinging jet. CRC Press, pp. 105-129. ISBN 9781351019217; 9781138497269

Cheng, S.W.Y. and Kurnia, J.C. and Sasmito, A.P. and Lubis, L.A. (2019) The effect of triangular protrusions on geothermal wellbore heat exchanger from retrofitted abandoned oil wells. In: UNSPECIFIED.

Lim, D.C. and Al-Kayiem, H.H. and Kurnia, J.C. (2018) Comparison of different turbulence models in pipe flow of various Reynolds numbers. In: UNSPECIFIED.

Puspitasari, D. and Rabie, F.K.H. and Ginta, T.L. and Kurnia, J.C. and Mustapha, M. (2018) The Influence of Temperature on Stability of Aluminum Foam Cell Wall during Foaming Process. In: UNSPECIFIED.

Ismadi, M.Z.P. and Kurnia, J.C. and Sulaiman, S.A. and Hassan, S. and Awang, M. and Yusoff, P.S.M.M. and Urquia, A. (2018) The Need of Computer Modelling and Simulation (CMS) Competency among Employers in Malaysia. In: UNSPECIFIED.

Kurnia, J.C. and Sasmito, A.P. (2018) Numerical Evaluation of Heat Transfer and Entropy Generation of Helical Tubes with Various Cross-sections under Constant Heat Flux Condition. In: UNSPECIFIED.

Kurnia, J.C. and Sasmito, A.P. (2018) Numerical investigation of heat transfer performance of a rotating latent heat thermal energy storage. Applied Energy, 227. pp. 542-554. ISSN 03062619

Cheng, S.W.Y. and Kurnia, J.C. and Isa, M.S.M. and Ashraf, S. (2018) Numerical investigation on the heat transfer of wellbore heat extractor. In: UNSPECIFIED.

Koh, K. and Al-Kayiem, H.H. and Kurnia, J.C. (2018) Thermal Comfort Assessment of an Office Building in Tropical Climate Condition. In: UNSPECIFIED.

Kurnia, J.C. and Sasmito, A.P. (2017) Heat transfer performance and entropy generation of helical square tubes with various curvature radiuses. In: UNSPECIFIED.

Kurnia, J.C. and Sasmito, A.P. and Ping, S.I. (2017) Investigation of Heat Transfer on a Rotating Latent Heat Energy Storage. In: UNSPECIFIED.

Akhtar, S. and Khan, M.N. and Kurnia, J.C. and Shamim, T. (2017) Investigation of energy conversion and flame stability in a curved micro-combustor for thermo-photovoltaic (TPV) applications. Applied Energy, 192. pp. 134-145. ISSN 03062619

Inayat, M. and Sulaiman, S.A. and Kurnia, J.C. (2017) Investigation on the effect of blending ratio and airflow rate on syngas profile produced from co-gasification of blended feedstock. In: UNSPECIFIED.

Kurnia, J.C. and Sasmito, A.P. (2017) Numerical investigation of phase change materials thermal capacitor for pipe flow. In: UNSPECIFIED.

Sasmito, A.P. and Kurnia, J.C. and Shamim, T. and Mujumdar, A.S. (2017) Optimization of an open-cathode polymer electrolyte fuel cells stack utilizing Taguchi method. Applied Energy, 185. pp. 1225-1232. ISSN 03062619

Kurnia, J.C. and Sasmito, A.P. and Xu, P. and Mujumdar, A.S. (2017) Performance and potential energy saving of thermal dryer with intermittent impinging jet. Applied Thermal Engineering, 113. pp. 246-258. ISSN 13594311

Kurnia, J.C. and Sasmito, A.P. and Shamim, T. (2017) Performance evaluation of a PEM fuel cell stack with variable inlet flows under simulated driving cycle conditions. Applied Energy, 206. pp. 751-764. ISSN 03062619

Yueze, L. and Akhtar, S. and Sasmito, A.P. and Kurnia, J.C. (2017) Prediction of air flow, methane, and coal dust dispersion in a room and pillar mining face. International Journal of Mining Science and Technology, 27 (4). pp. 657-662. ISSN 20952686

Kurnia, J.C. and Jangam, S.V. and Akhtar, S. and Sasmito, A.P. and Mujumdar, A.S. (2016) Advances in biofuel production from oil palm and palm oil processing wastes: A review. Biofuel Research Journal, 3 (1). pp. 332-346. ISSN 22928782

Kurnia, J.C. and Sasmito, A.P. (2016) Heat transfer performance of non-circular coiled tubes - research summary, challenges and directions. International Journal of Automotive and Mechanical Engineering, 13 (3). pp. 3710-3727. ISSN 22298649

Kurnia, J.C. and Sasmito, A.P. and Shamim, T. and Mujumdar, A.S. (2016) Numerical investigation of heat transfer and entropy generation of laminar flow in helical tubes with various cross sections. Applied Thermal Engineering, 102. pp. 849-860. ISSN 13594311

Kurnia, J.C. and Sasmito, A.P. and Mujumdar, A.S. (2016) Potential catalyst savings in heterogeneous gaseous spiral coiled reactor utilizing selective wall coating - A computational study. Computers and Chemical Engineering, 88. pp. 59-72. ISSN 00981354

Kurnia, J.C. and Sasmito, A.P. and Mujumdar, A.S. (2016) Thermal Performance of Coiled Square Tubes at Large Temperature Differences for Heat Exchanger Application. Heat Transfer Engineering, 37 (16). pp. 1341-1356. ISSN 01457632

Kurnia, J.C. and Xu, P. and Sasmito, A.P. (2016) A novel concept of enhanced gas recovery strategy from ventilation air methane in underground coal mines � A computational investigation. Journal of Natural Gas Science and Engineering, 35. pp. 661-672. ISSN 18755100

Sasmito, A.P. and Kurnia, J.C. and Birgersson, E. and Mujumdar, A.S. (2015) Computational evaluation of thermal management strategies in an underground mine. Applied Thermal Engineering, 90. pp. 1144-1150. ISSN 13594311

Kurnia, J.C. and Sasmito, A.P. and Hassani, F.P. and Mujumdar, A.S. (2015) Introduction and evaluation of a novel hybrid brattice for improved dust control in underground mining faces: A computational study. International Journal of Mining Science and Technology, 25 (4). pp. 537-543. ISSN 20952686

Akhtar, S. and Khan, M.N. and Kurnia, J.C. and Shamim, T. (2015) Numerical Investigation of H2-air Premixed Combustion in a Curved Micro-combustor for Thermo-photovoltaic (TPV) Applications. In: UNSPECIFIED.

Kurnia, J.C. and Sasmito, A.P. and Akhtar, S. and Shamim, T. and Mujumdar, A.S. (2015) Numerical Investigation of Heat Transfer Performance of Various Coiled Square Tubes for Heat Exchanger Application. In: UNSPECIFIED.

Sasmito, A.P. and Kurnia, J.C. and Shamim, T. and Mujumdar, A.S. (2015) Optimization of Design Parameters for an Open-cathode Polymer Electrolyte Fuel Cells Stack Utilizing Taguchi Method. In: UNSPECIFIED.

Akhtar, S. and Kurnia, J.C. and Shamim, T. (2015) A three-dimensional computational model of H2-air premixed combustion in non-circular micro-channels for a thermo-photovoltaic (TPV) application. Applied Energy, 152. pp. 47-57. ISSN 03062619