Article

Khan, R. and Mourad, A.-H.I. and Wieczorowski, M. and Damjanovi�, D. and Pao, W. and Elsheikh, A. and Seikh, A.H. (2024) Erosion-corrosion failure analysis of the elbow pipe of steam distribution manifold. Engineering Failure Analysis, 160.

Khan, R. and Wieczorowski, M. and Mourad, A.-H.I. and Seikh, A.H. and Ahmed, T. (2024) Evaluation of erosion of AISI 1045 carbon steel due to non-cohesive microparticles. Journal of Materials Research and Technology, 28. pp. 1423-1432.

Khan, R. and Ullah, S. and Qahtani, F. and Pao, W. and Talha, T. (2024) Experimental and numerical investigation of hydro-abrasive erosion in the Pelton turbine buckets for multiphase flow. Renewable Energy, 222.

Sarwar, U. and Muhammad, M. and Mokhtar, A.A. and Khan, R. and Behrani, P. and Kaka, S. (2024) Hybrid intelligence for enhanced fault detection and diagnosis for industrial gas turbine engine. Results in Engineering, 21.

Khan, M.A. and Khan, R. and Al-Zghoul, T.M. and Khan, A. and Hussain, A. and Baarimah, A.O. and Arshad, M.A. (2024) Optimizing municipal solid waste management in urban Peshawar: A linear mathematical modeling and GIS approach for efficiency and sustainability. Case Studies in Chemical and Environmental Engineering, 9.

Khan, R. and Wieczorowski, M. and Qureshi, A. and Ammar, M. and Ahmed, T. and Khan, U. (2024) Recent Trends in Artificial Intelligence and Machine Learning Methods Applied to Water Jet Machining. Lecture Notes in Mechanical Engineering. pp. 34-45.

Khan, M.T. and Khan, R. and Khan, A. (2023) Ageing and Driving Performance in the UK Using Normal Mixture Model Cluster Analysis Technique. Transactions on Transport Sciences, 14 (2). pp. 48-53. ISSN 18029876

Sattar, M. and Othman, A.R. and Muzamil, M. and Kamaruddin, S. and Akhtar, M. and Khan, R. (2023) Correlation Analysis of Established Creep Failure Models through Computational Modelling for SS-304 Material. Metals, 13 (2).

Khan, R. and Mourad, A.-H.I. and Seikh, A.H. and Petru, J. and H.Ya, H. (2023) Erosion impact on mild steel elbow pipeline for different orientations under liquid-gas-sand annular flow. Engineering Failure Analysis, 153.

Khan, R. and Petru, J. and Seikh, A.H. (2023) Erosion prediction due to micron-sized particles in the multiphase flow of T and Y pipes of oil and gas fields. International Journal of Pressure Vessels and Piping, 206.

Azeem, M. and Haji Ya, H. and Azad Alam, M. and Sadique, M.R. and Mustapha, M.B. and Akmar Bin Mokhtar, A. and Ahmed, T. and Sultan, M.T.H. and Khan, R. (2023) Growth of NGVs and Comparative Study of Cylinder Material for CNG Storage. Lecture Notes in Mechanical Engineering. pp. 689-704.

Alam, M.A. and Ya, H.H. and Qistina, N.A. and Azeem, M. and Mustapha, M. and Yusuf, M. and Masood, F. and Khan, R. and Ahmad, T. (2023) Investigating the Microhardness Behavior of Al6061/TiC Surface Composites Produced by Friction Stir Processing. International Journal of Computational Methods and Experimental Measurements, 11 (3). pp. 157-161.

Nawaz, R. and Haider, S. and Anjum, M. and Haneef, T. and Oad, V.K. and Aqif, M. and Haider, A. and Khan, R. (2023) Photodegrading hazardous pollutants using black TiO2 materials with different morphology and estimation of energy requirement. Materials Chemistry and Physics, 309.

Haider, S. and Nawaz, R. and Anjum, M. and Haneef, T. and Oad, V.K. and Uddinkhan, S. and Khan, R. and Aqif, M. (2023) Property-performance relationship of core-shell structured black TiO2 photocatalyst for environmental remediation. Frontiers of Environmental Science and Engineering, 17 (9).

Ahmed, T. and Ya, H.H. and Majid, M.A.A. and Imran, M. and Khan, R. and Azeem, M. and Azad Alam, M. and Khalid, H.U. and Mehmood, A. (2023) The Study of Pseudo-ductile Polymer Nano Composite Reinforced with Non-treated Inorganic Nanofillers. Lecture Notes in Mechanical Engineering. pp. 981-992.

Azeem, M. and Ya, H.H. and Kumar, M. and Stabla, P. and Smolnicki, M. and Gemi, L. and Khan, R. and Ahmed, T. and Ma, Q. and Sadique, M.R. and Mokhtar, A.A. and Mustapha, M. (2022) Application of Filament Winding Technology in Composite Pressure Vessels and Challenges: A Review. Journal of Energy Storage, 49. ISSN 2352152X

Khan, R. and Ya, H.H. and Shah, I. and Niazi, U.M. and Ahmed, B.A. and Irfan, M. and Glowacz, A. and Pilch, Z. and Brumercik, F. and Azeem, M. and Alam, M.A. and Ahmed, T. (2022) Influence of Elbow Angle on Erosion-Corrosion of 1018 Steel for Gas�Liquid�Solid Three Phase Flow. Materials, 15 (10). ISSN 19961944

Sattar, M. and Othman, A.R. and Kamaruddin, S. and Akhtar, M. and Khan, R. (2022) Limitations on the computational analysis of creep failure models: A review. Engineering Failure Analysis, 134. ISSN 13506307

Sattar, M. and Othman, A.R. and Akhtar, M. and Kamaruddin, S. and Khan, R. and Masood, F. and Alam, M.A. and Azeem, M. and Mohsin, S. (2021) Curve fitting for damage evolution through regression analysis for the kachanov�rabotnov model to the norton�bailey creep law of ss-316 material. Materials, 14 (19). ISSN 19961944

Ali, M. and Room, S. and Khan, M.I. and Masood, F. and Ali Memon, R. and Khan, R. and Memon, A.M. (2020) Assessment of local earthen bricks in perspective of physical and mechanical properties using Geographical Information System in Peshawar, Pakistan. Structures, 28. pp. 2549-2561. ISSN 23520124

Khan, R. and Ya, H.H. and Pao, W. and Majid, M.A.A. and Ahmed, T. and Ahmad, A. and Alam, M.A. and Azeem, M. and Iftikhar, H. (2020) Effect of sand fines concentration on the erosion-corrosion mechanism of carbon steel 90� elbow pipe in slug flow. Materials, 13 (20). pp. 1-16. ISSN 19961944

Khan, R. and Ya, H.H. and Pao, W. and Khan, A. and Zahoor, R. and Ahmed, T. (2020) Influence of elbow orientation on solid particle erosion for multiphase flow. Lecture Notes in Mechanical Engineering. pp. 695-701. ISSN 21954356

Khan, R. and Ya, H.H. and Pao, W. and Abdullah, M.Z.B. and Dzubir, F.A. (2020) Influence of sand fines transport velocity on erosion-corrosion phenomena of carbon steel 90-degree elbow. Metals, 10 (5). ISSN 20754701

Khan, R. and Ya, H.H. and Pao, W. and Rao, T.V.V.L.N. and Alam, A. and Azeem, M. (2020) Investigation of maximum erosion zone in the horizontal 90° elbow. Lecture Notes in Mechanical Engineering. pp. 223-230. ISSN 21954356

Alam, M.A. and Ya, H.H. and Azeem, M. and Hussain, P.B. and Salit, M.S.B. and Khan, R. and Arif, S. and Ansari, A.H. (2020) Modelling and optimisation of hardness behaviour of sintered Al/SiC composites using RSM and ANN: A comparative study. Journal of Materials Research and Technology, 9 (6). pp. 14036-14050. ISSN 22387854

Ahmed, T. and Ya, H.H. and Khan, R. and Lubis, A.M.H.S. and Mahadzir, S. (2020) Pseudo-ductility, morphology and fractography resulting from the synergistic effect of CaCO3 and bentonite in HDPE polymer nano composite. Materials, 13 (15). ISSN 19961944

Ahmed, T. and Ya, H.H. and Mahadzir, S. and Khan, R. and Alam, M.A. (2020) An overview: Mechanical and wear properties of hdpe polymer nanocomposites reinforced with treated/non-treated inorganic nanofillers. Lecture Notes in Mechanical Engineering. pp. 231-241. ISSN 21954356

Khan, R. and Ya, H.H. and Pao, W. and Khan, A. (2019) Erosion-corrosion of 30°, 60°, and 90° carbon steel elbows in a multiphase flow containing sand particles. Materials, 12 (23). ISSN 19961944

Khan, R. and Ya, H.H. and Pao, W. (2019) Numerical investigation of the elbow angle effect on solid particle erosion for liquid-solid. International Journal of Mechanical and Mechatronics Engineering, 19 (1). pp. 1-13. ISSN 22272771

Khan, R. and Ya, H.H. and Pao, W. (2019) Numerical investigation of the influence of sand particle concentration on long radius elbow erosion for liquid-solid flow. International Journal of Engineering, Transactions A: Basics, 32 (10). pp. 1485-1490. ISSN 17281431

Khan, R. and Ya, H.H. and Pao, W. (2019) An experimental study on the erosion-corrosion performance of AISI 1018 carbon steel and AISI 304L stainless steel 90-degree elbow pipe. Metals, 9 (12). ISSN 20754701

Conference or Workshop Item

Raheem, A. and Khan, R. and Mazhar, A.R. and Ya, H.H. and Alam, M.A. and Ahmed, T. and Azeem, M. (2021) A Review of Recent Studies of Dynamometers for Cutting Force Measurement in Machining Processes. In: UNSPECIFIED.

Ya, H.H. and Hafizzie, A. and Pao, W. and Hassan, S. and Khan, R. (2018) Experimental study on the impact of wet sand particle to the erosion of carbon steel and HDPE. In: UNSPECIFIED.

Ya, H.H. and Othman, M.F. and Pao, W. and Tran, N.N. and Khan, R. (2018) Simulation study on impact of fine sand particle to 90°steel elbow in pipe. In: UNSPECIFIED.