Bharathy, N.K.A.M. and Mehat, N.M. and Kamaruddin, S. (2024) Multi-factors optimization of injection moulded plastic bearing via Taguchi method. In: UNSPECIFIED.

Rauf, N.A.A.A. and Mehat, N.M. and Kamaruddin, S. (2024) Optimisation of 3d printing parameters of acrylonitrile-butadiene-styrene thin-walled and hollow structure via integration Taguchi method and principle component analysis. In: UNSPECIFIED.

Latiff, Z.A. and Mehat, N.M. and Rauf, N.A.A.A. and Kamaruddin, S. (2024) Optimization of Topology and Mechanical Properties of 3D Printed Hollow and Thin-Walled Structures via Integration of Taguchi Method and Grey Relational Analysis. Journal of Advanced Research in Applied Mechanics, 115 (1). pp. 18-35.

Mohd Asri, N.H. and Che Ani, M.N. and Kamaruddin, S. and Azid, I.A. (2024) A Review of Six Sigma Implementation in Manufacturing Industries. SpringerBriefs in Applied Sciences and Technology, Part F. pp. 9-15.

Abu Hassan, D.I. and Che Ani, M.N. and Kamaruddin, S. and Azid, I.A. (2024) Wastes Detection Using a Value Stream Mapping (VSM) Technique in an Electronic-Based Manufacturing Company. SpringerBriefs in Applied Sciences and Technology, Part F. pp. 1-7.

Sattar, M. and Othman, A.R. and Muzamil, M. and Kamaruddin, S. and Akhtar, M. and Khan, R. (2023) Correlation Analysis of Established Creep Failure Models through Computational Modelling for SS-304 Material. Metals, 13 (2).

Sharuddin, M.H.B. and Sulaiman, M.H. and Kamaruddin, S. and Dahnel, A.H. and Abd Halim, N.F.H. and Ridzuan, M.J.M. and Abdul-Rani, A.M. (2023) Properties and tribological evaluation of graphene and fullerene nanoparticles as additives in oil lubrication. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 237 (8). pp. 1647-1656.

Subramaniam, V.S. and Prakash, J. and Kamaruddin, S. and Khoo, S.W. (2023) A comprehensive validation framework addressing utility parameter validation for application in small and medium enterprises (SMEs):A case study in pharmaceutical industry. Cogent Engineering, 10 (1).

Ani, M.N.C. and Kamaruddin, S. and Azid, I.A. (2022) Enhancement of the efficiency of internal supply chain production system through process-to-process interaction. International Journal of Productivity and Quality Management, 35 (3). pp. 332-351. ISSN 17466474

Sattar, M. and Othman, A.R. and Kamaruddin, S. and Akhtar, M. and Khan, R. (2022) Limitations on the computational analysis of creep failure models: A review. Engineering Failure Analysis, 134. ISSN 13506307

Nor, M.A.M. and Kamaruddin, S. and Lemma, T.A. (2022) Numerical investigation of API 31 cyclone separator for mechanical seal piping plan for rotating machineries. Alexandria Engineering Journal, 61 (2). pp. 1597-1606. ISSN 11100168

Rosni, M.D.M. and Ani, M.N.C. and Azid, I.A. and Kamaruddin, S. (2022) Solving production bottleneck through developed define-measure-delegate-implement-control in solving production bottleneck. International Journal of Six Sigma and Competitive Advantage, 14 (2). pp. 209-226. ISSN 14792494

Sattar, M. and Othman, A.R. and Kamaruddin, S. and Alam, M.A. and Azeem, M. (2021) Creep parameters determination by omega model to norton bailey law by regression analysis for austenitic steel ss-304. Solid State Phenomena, 324 SS. pp. 188-197. ISSN 10120394

Sattar, M. and Othman, A.R. and Akhtar, M. and Kamaruddin, S. and Khan, R. and Masood, F. and Alam, M.A. and Azeem, M. and Mohsin, S. (2021) Curve fitting for damage evolution through regression analysis for the kachanov�rabotnov model to the norton�bailey creep law of ss-316 material. Materials, 14 (19). ISSN 19961944

Fong, K.M. and Wang, X. and Kamaruddin, S. and Ismadi, M.-Z. (2021) Investigation on universal tool wear measurement technique using image-based cross-correlation analysis. Measurement: Journal of the International Measurement Confederation, 169. ISSN 02632241

Mehat, N.M. and Syazani, Z. and Kamaruddin, S. (2021) Optimization of wear behavior on unreinforced/glass fiber reinforced plastic injection moulded gear via integration of Taguchi method and principal component analysis. In: UNSPECIFIED.

Ab-Samat, H. and Kamaruddin, S. (2020) Development of opportunistic maintenance policy towards optimal maintenance system (OPTOMS) model: A case study. Journal of Quality in Maintenance Engineering, 26 (1). pp. 129-165. ISSN 13552511

Alabri, S.D. and Kamaruddin, S. and Gilal, A.R. and Jaafar, J. and Aziz, I.A. (2020) The Moderation Influence of Power Distance on the Relationship between Technological Factors and the Successful Implementation of Citizen Relationship Management in the Public Sector. IEEE Access, 8. pp. 132446-132465. ISSN 21693536

Mehat, N.M. and Zainuddin, M.A. and Kamaruddin, S. and Khan, Z.A. (2020) OPTIMIZATION OF MULTI FACTORS FOR INJECTION-MOULDED MICRO GEAR VIA NUMERICAL SIMULATION INTEGRATED WITH THE TAGUCHI METHOD AND PRINCIPAL COMPONENT ANALYSIS. Journal of Advanced Manufacturing Technology, 14 (2). pp. 43-56. ISSN 19853157

Mehat, N.M. and Md Noor, H. and Kamaruddin, S. (2020) Optimization of multiple quality characteristics for injection moulded polyamide helical gear via integration of Taguchi method and Grey relational analysis. In: UNSPECIFIED.

Kok, K.C. and Feng, C.J. and Kamaruddin, S. (2020) Short-run univariate quality control approaches. International Journal of Productivity and Quality Management, 31 (4). pp. 483-507. ISSN 17466474

Azid, I.A. and Ani, M.N.C. and Hamid, S.A.A. and Kamaruddin, S. (2020) Solving production bottleneck through time study analysis and quality tools integration. International Journal of Industrial Engineering : Theory Applications and Practice, 27 (1). pp. 13-27. ISSN 10724761

Liew, C.F. and Prakash, J. and Kamaruddin, S. and Ong, K.S. (2019) Deployment of an FMEA-Integrated Framework to Improve Operational Performance in Semiconductor Manufacturing: A Case Study. In: UNSPECIFIED.

Ani, M.N.C. and Kamaruddin, S. and Azid, I.A. (2019) Factory-in-factory concept as a new business model for automotive production system. International Journal of Six Sigma and Competitive Advantage, 11 (2-3). pp. 157-178. ISSN 14792494

Hoe, H.K. and Prakash, J. and Kamaruddin, S. and Seng, O.K. (2019) An Integrated Model for Adjustment of Process Parameters to Recover Throughput Shortage in Semiconductor Assembly: A Case Study. Journal of Industrial Engineering and Management, 12 (2). pp. 340-355. ISSN 20138423

Ani, M.N.C. and Kamaruddin, S. and Azid, I.A. (2019) Leanness production system through improving of upstream process based on check-act-plan-do cycle. International Journal of Six Sigma and Competitive Advantage, 11 (2-3). pp. 95-113. ISSN 14792494

Koh, C.K. and Chin, J.F. and Kamaruddin, S. (2019) Modified short-run statistical process control for test and measurement process. International Journal of Advanced Manufacturing Technology, 100 (5-8). pp. 1531-1548. ISSN 02683768

Syarafuddin Salam, S. and Mizamzul Mehat, N. and Kamaruddin, S. (2019) Optimization of Laminated Composites Characteristics via integration of Chamis Equation, Taguchi method and Principal Component Analysis. In: UNSPECIFIED.

Jie, Y.J. and Kamaruddin, S. and Mustapha, M. and Siddiquee, A.N. and Al-Ahmari, A. and Khan, Z.A. and Abidi, M.H. and Gangil, N. (2019) Reclamation of steel shots by acid leaching for powder metallurgy applications. Advances in Mechanical Engineering, 11 (7). ISSN 16878132

Ani, M.N.C. and Kamaruddin, S. and Azid, I.A. (2019) Streamlining the flow of production system through elimination the waste of the overburden (muri) for manual handling process. In: UNSPECIFIED.

Chin, J.F. and Prakash, J. and Kamaruddin, S. and Tan, M.C.L. (2018) Automating computer simulation and statistical analysis in production planning and control research. International Journal of Computers and Applications, 40 (1). pp. 25-41. ISSN 1206212X

Jamaluddin, A.A. and Mehat, N.M. and Kamaruddin, S. (2018) Effect of processing parameters on the shrinkage behaviour of injection moulded polypropylene gear. In: UNSPECIFIED.

Yen, L.H. and Kamaruddin, S. and Ismadi, Z.P. and Prakash, J. and Mehat, N.M. (2018) Impact of capacity loss factors in front-of-line IC packaging on production performance: A case study. In: UNSPECIFIED.

Whah, C.Y. and Tiek, L.K. and Beng, K.S. and Kamaruddin, S. (2018) Knowledge and talent development in the Electronics and electrical (EE) industry of Malaysia state-industry-university collaboration. Asian Journal of Social Science, 46 (6). pp. 668-705. ISSN 15684849

Koh, C.K. and Chin, J.F. and Kamaruddin, S. (2018) Modified SPC for short run test and measurement process in multi-stations. In: UNSPECIFIED.

Mehat, N.M. and Zakarria, N.S. and Kamaruddin, S. (2018) Optimization of Recycled Glass Fibre-Reinforced Plastics Gear via Integration of the Taguchi Method and Grey Relational Analysis. In: UNSPECIFIED.

Jamaludin, A.A. and Mehat, N.M. and Kamaruddin, S. (2018) PDC cutter optimization using response surface methodology with orthogonal arrays. In: UNSPECIFIED.

Sukeri, M. and Paiz Ismadi, M.Z. and Othman, A.R. and Kamaruddin, S. (2018) Wear Detection of Drill Bit by Image-based Technique. In: UNSPECIFIED.

Che Ani, M.N. and Kamaruddin, S. and Azid, I.A. (2018) The model development of an effective triggering system of production Kanban size towards just-in-time (JIT) production. Advances in Science, Technology and Engineering Systems, 3 (5). pp. 298-306. ISSN 24156698

Sheng, L.W. and Basri, E.I. and Kamaruddin, S. (2017) Analysis on the effect of shop floor parameters on the effectiveness of preventive maintenance through discrete event simulation. Pertanika Journal of Science and Technology, 25 (1). pp. 1-16. ISSN 01287680

Mehat, N.M. and Kamaruddin, S. (2017) Evaluation on the feasibility of using bamboo fillers in plastic gear manufacturing via the Taguchi optimization method. In: UNSPECIFIED.

Jamaludin, A.A. and Mehat, N.M. and Kamaruddin, S. (2017) Investigating the effects of PDC cutters geometry on ROP using the Taguchi technique. In: UNSPECIFIED.

Mehat, N.M. and Mohd Kassim, S. and Kamaruddin, S. (2017) Investigation on the effects of processing parameters on shrinkage behaviour and tensile properties of injection moulded plastic gear via the Taguchi method. In: UNSPECIFIED.

Basri, E.I. and Razak, I.H.A. and Ab-Samat, H. and Kamaruddin, S. (2017) Preventive maintenance (PM) planning: A review. Journal of Quality in Maintenance Engineering, 23 (2). pp. 114-143. ISSN 13552511

Ahmad, R. and Kamaruddin, S. (2017) Structured maintenance engineering policy development based on a production machine process perspective. Journal of Quality in Maintenance Engineering, 23 (2). pp. 180-194. ISSN 13552511

Che-Ani, M.N. and Kamaruddin, S. and Azid, I.A. (2017) Towards just-in-time (JIT) production system through enhancing part preparation process. In: UNSPECIFIED.

Hassan, M.H. and Othman, A.R. and Kamaruddin, S. (2017) A review on the manufacturing defects of complex-shaped laminate in aircraft composite structures. International Journal of Advanced Manufacturing Technology, 91 (9-12). pp. 4081-4094. ISSN 02683768

Hassan, M.H. and Othman, A.R. and Kamaruddin, S. (2017) The use of response surface methodology (RSM) to optimize the acid digestion parameters in fiber volume fraction test of aircraft composite structures. International Journal of Advanced Manufacturing Technology, 90 (9-12). pp. 3739-3748. ISSN 02683768

Suki, N.S.A. and Yee, O.H. and Kamaruddin, S. and Bakar, E.A. (2016) Establishing an optimal quality planning decision through discrete event simulation: Analysis case study. Jurnal Teknologi, 78 (7). pp. 149-160. ISSN 01279696

Cheng Ying, Y. and Ab-Samat, H. and Kamaruddin, S. (2016) Practical production layout design for multi-product and small-lot-size production: A case study. Jurnal Teknologi, 78 (7). pp. 161-175. ISSN 01279696

Kamaruddin, S. and Zakarria, N.S. and Mehat, N.M. (2016) The influence of plastic extrusion blow molding parameters on waste reduction. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12029-12032. ISSN 18196608

Low, S.-N. and Kamaruddin, S. and Azid, I.B.H.A. (2016) An integrated simulation with design on experiment approach for shop floor improvement solution selections. European Journal of Industrial Engineering, 10 (4). pp. 479-498. ISSN 17515254

Karia, N. and Asaari, M.H.A.H. and Mohamad, N. and Kamaruddin, S. (2015) Assessing Halal logistics competence: An Islamic-based and resource-based view. In: UNSPECIFIED.

Mat Desa, W.L.H. and Kamaruddin, S. and Nawawi, M.K.M. and Zulkepli, J. (2015) Evaluation on absenteeism effect in production line at aircraft composite manufacturer. Jurnal Teknologi, 77 (5). pp. 63-67. ISSN 01279696

Ziao, C.Z. and Kamaruddin, S. (2015) Numerical assessment on makespan minimization by adopting NEH heuristics in permutation flow shop. In: UNSPECIFIED.

Mohamad, N. and Kamaruddin, S. and Purwanto, U.S. (2015) The effects of organizational innovation on operational performance and other types of innovation. In: UNSPECIFIED.

Elamvazuthi, I. and Kamaruddin, S. and Azmi, M.S. (2009) Automation of nesting and cutting processes of leather furniture production: A case study. International Journal of Mechanical and Mechatronics Engineering, 9 (10). pp. 25-29. ISSN 22272771