Ali, H. and Maulud, A.S. and Zabiri, H. and Nawaz, M. and Ismail, L. (2022) Fault diagnosis by using multi-scale signed directed graph. In: UNSPECIFIED.

Mohd Noor, N.H. and Ismail, L. and Abdul Karim, M.F. and Hambali, K. and Hassin, N.H. and Abas, M.A. and Maulud, A.S. (2020) On the Effects of Cold Temperatures and Solute Concentrations on the Solidification of Gelatine. In: UNSPECIFIED.

Hosseinipour, A. and Japper-Jaafar, A. and Yusup, S. and Ismail, L. (2019) Application of the Avrami theory for wax crystallisation of synthetic crude oil. International Journal of Engineering, Transactions A: Basics, 32 (1). pp. 18-27. ISSN 17281431

Nashed, O. and Sabil, K.M. and Ismail, L. and Japper-Jaafar, A. and Lal, B. (2018) Mean induction time and isothermal kinetic analysis of methane hydrate formation in water and imidazolium based ionic liquid solutions. Journal of Chemical Thermodynamics, 117. pp. 147-154. ISSN 00219614

Thanh, N.T. and Uemura, Y. and Krishnan, V. and Ismail, L. (2016) The Effect of Air Injection Rate and Medium Nitrogen Concentration on Cell Biomass and Lipid Content of Scenedesmus Quadricauda in Flat Plate Photobioreactor. In: UNSPECIFIED.

Siyal, A.A. and Azizli, K.A. and Man, Z. and Ismail, L. and Khan, M.I. (2016) Geopolymerization kinetics of fly ash based geopolymers using JMAK model. Ceramics International, 42 (14). pp. 15575-15584. ISSN 02728842

Abdul Rahim, R.H. and Rahmiati, T. and Azizli, K.A. and Man, Z. and Nuruddin, M.F. and Ismail, L. (2015) Comparison of using NaOH and KOH activated fly ash-based geopolymer on the mechanical properties. Materials Science Forum, 803. pp. 179-184. ISSN 02555476

Rahmiati, T. and Azizli, K.A. and Man, Z. and Ismail, L. and Nuruddin, M.F. (2015) Effect of solid/liquid ratio during curing time fly ash based geopolymer on mechanical property. Materials Science Forum, 803. pp. 120-124. ISSN 02555476

Sabil, K.M. and Nashed, O. and Lal, B. and Ismail, L. and Japper-Jaafar, A. (2015) Experimental investigation on the dissociation conditions of methane hydrate in the presence of imidazolium-based ionic liquids. Journal of Chemical Thermodynamics, 84. pp. 7-13. ISSN 00219614

Zamri, N.H. and Ismail, L. and Abdul Rahim, R.H. and Siyal, A.A. and Man, Z. and Azizli, K.A. (2015) Kinetics of geopolymer solidification study using texture analyzer. Materials Science Forum, 803. pp. 75-80. ISSN 02555476

Trinh, T.H. and Kushaari, K. and Shuib, A.S. and Ismail, L. and Azeem, B. (2015) Modelling the release of nitrogen from controlled release fertiliser: Constant and decay release. Biosystems Engineering, 130. pp. 34-42. ISSN 15375110

Siyal, A.A. and Azizli, K.A. and Ismail, L. and Man, Z. and Khan, M.I. (2015) Quantification of geopolymers production by chemical methods- A short review. In: UNSPECIFIED.

Asif, A. and Man, Z. and Mohd Azizli, K.A. and Nuruddin, M.F. and Ismail, L. (2015) The effect of Si/Al ratio and sodium silicate on the mechanical properties of fly ash based geopolymer for coating. Materials Science Forum, 803. pp. 355-361. ISSN 02555476

Asif, A. and Man, Z. and Azizli, K.A.M. and Nuruddin, M.F. and Ismail, L. (2014) Effect of NAOH concentration on the strength of non sodium silicate fly ash geopolymer. Applied Mechanics and Materials, 625. pp. 102-105. ISSN 16609336

Siyal, A.A. and Ismail, L. and Man, Z. and Azizli, K.A. (2014) Effect of NaOH and water contents on solidification of sodium silicate free geopolymer. Applied Mechanics and Materials, 625. pp. 3-6. ISSN 16609336

Abdul Rahim, R.H. and Azizli, K.A. and Man, Z. and Rahmiati, T. and Ismail, L. (2014) Effect of solid to liquid ratio on the mechanical and physical properties of fly ash geopolymer without sodium silicate. Applied Mechanics and Materials, 625. pp. 46-49. ISSN 16609336

Pauzi, A.H. and Ismail, L. and Siyal, A.A. and Man, Z. and Azizli, K.A. (2014) Experimental study of geopolymer solidification kinetics. Applied Mechanics and Materials, 625. pp. 127-130. ISSN 16609336

Mushtaq, M. and Tan, I.M. and Ismail, L. and Nadeem, M. and Sagir, M. and Azam, R. and Hashmet, R. (2014) Influence of PZC (Point of Zero Charge) on the Static Adsorption of Anionic Surfactants on a Malaysian Sandstone. Journal of Dispersion Science and Technology, 35 (3). pp. 343-349. ISSN 01932691

Azam, M.R. and Tan, I.M. and Ismail, L. and Mushtaq, M. and Nadeem, M. and Sagir, M. (2014) Kinetics and Equilibria of Synthesized Anionic Surfactant onto Berea Sandstone. Journal of Dispersion Science and Technology, 35 (2). pp. 223-230. ISSN 01932691

Hamidi, R.M. and Man, Z. and Azizli, K.A. and Ismail, L. and Nuruddin, M.F. (2014) Mechanical activation of fly ash by high energy planetary ball mill and the effects on physical and morphology properties. Applied Mechanics and Materials, 625. pp. 38-41. ISSN 16609336

Sagir, M. and Tan, I.M. and Mushtaq, M. and Ismail, L. and Nadeem, M. and Azam, M.R. and Hashmet, M.R. (2014) Novel Surfactant for the Reduction of CO2/Brine Interfacial Tension. Journal of Dispersion Science and Technology, 35 (3). pp. 463-470. ISSN 01932691

Mushtaq, M. and Tan, I.M. and Ismail, L. and Lee, S.Y.C. and Nadeem, M. and Sagir, M. (2014) Oleate Ester-Derived Nonionic Surfactants: Synthesis and Cloud Point Behavior Studies. Journal of Dispersion Science and Technology, 35 (3). pp. 322-328. ISSN 01932691

Abdullah, S.B. and Man, Z. and Ismail, L. and Mutalib, M.I.A. and Bustam, M.A. (2014) Solubility parameters based on refractive index data of ionic liquid. Advanced Materials Research, 917. pp. 45-55. ISSN 10226680

Nashed, O. and Sabil, K.M. and Lal, B. and Ismail, L. and Jaafar, A.J. (2014) Study of 1-(2-hydroxyethyle) 3-methylimidazolium halide as thermodynamic inhibitors. Applied Mechanics and Materials, 625. pp. 337-340. ISSN 16609336

Trinh, T.H. and Dao, Q.N. and Kushaari, K. and Ismail, L. and Shuib, A. (2014) Study the release of urea from Agrium® coated urea using UV-Vis spectrometer. Applied Mechanics and Materials, 625. pp. 745-748. ISSN 16609336

Sagir, M. and Tan, I.M. and Mushtaq, M. and Ismail, L. and Nadeem, M. and Azam, M.R. (2014) Synthesis of a New CO2 Philic Surfactant for Enhanced Oil Recovery Applications. Journal of Dispersion Science and Technology, 35 (5). pp. 647-654. ISSN 01932691

Rahmiati, T. and Azizli, K.A. and Man, Z. and Ismail, L. and Nuruddin, M.F. (2014) The effect of KOH concentration on setting time and compressive strength of fly ash-based geopolymer. Applied Mechanics and Materials, 625. pp. 94-97. ISSN 16609336

Hosseinipour, A. and Sabil, K.M. and Arya Ekaputra, A. and Japper, A.B. and Ismail, L. (2014) The impact of the composition of the crude oils on the wax crystallization. Applied Mechanics and Materials, 625. pp. 196-200. ISSN 16609336

Kamil, R.N.M. and Yusup, S. and Ismail, L. (2013) Application of taguchi method for optimization of polyol ester production by esterification of neopentyl glycol with hexanoic acid. Asian Journal of Chemistry, 25 (15). pp. 8256-8260. ISSN 09707077

Azam, M.R. and Tan, I.M. and Ismail, L. and Mushtaq, M. and Nadeem, M. and Sagir, M. (2013) Static adsorption of anionic surfactant onto crushed Berea sandstone. Journal of Petroleum Exploration and Production Technology, 3 (3). pp. 195-201. ISSN 21900558

Aziz, M.A. and Sabil, K.M. and Uemura, Y. and Ismail, L. (2012) A study on torrefaction of oil palm biomass. Journal of Applied Sciences, 12 (11). pp. 1130-1135. ISSN 18125654

Mohiri, A. and Burhanudin, Z.A. and Ismail, I. and Ismail, L. (2011) Blood volume dependence of meat permittivity using dielectric mixing rules. In: UNSPECIFIED.

Prabaningrum, N. and Subbarao, D. and Ismail, L. (2011) In-situ transesterification of Jatropha curcas seeds using the mixture of methanol and isopropanol. In: UNSPECIFIED.

Abdullah Synmsul, B. and Man, Z. and Ismail, L. and Maulud, A. and Abdul Mutalib, M.I. and Bustam, M.A. (2011) An Optimization Study on the Extraction of Benzothiophene from Model Fuel using the Ionic Liquids 1-Butyl-3-MethylimidazoliumOctylsulfate. Research Journal of Chemistry and Environment, 15 (2). pp. 510-518. ISSN 09720626

Abdullah, S.S. and Yusup, S. and Ahmad, M.M. and Ramli, A. and Ismail, L. (2010) Thermogravimetry study on pyrolysis of various lignocellulosic biomass for potential hydrogen production. World Academy of Science, Engineering and Technology, 72. pp. 129-133. ISSN 2010376X