Aminu, N. and Kutty, S.R.M. and Isa, M.H. and Ismail, A. and Noor, A. and Al-dhawi, B.N.S. and Jagaba, A.H. (2023) Hybrid suspended growth bioreactor system for the nitrification, denitrification, and ammonia removal from beverage industry wastewater: Biokinetic modelling and optimization by response surface methodology. Case Studies in Chemical and Environmental Engineering, 8. ISSN 26660164

Wah, Y.B. and Ismail, A. and Azid, N.N.N. and Jaafar, J. and Aziz, I.A. and Hasan, M.H. and Zain, J.M. (2023) Machine Learning and Synthetic Minority Oversampling Techniques for Imbalanced Data: Improving Machine Failure Prediction. Computers, Materials and Continua, 75 (3). pp. 4821-4841.

Baharudin, B.A. and Mustapha, M. and Ismail, A. and Zulkipli, F.N. and Ayob, F. and Ahmad, A. (2023) Microhardness and Process Parameter Optimization of Friction Stir Welding on an AA5052 Thin Plate. Advanced Structured Materials, 165. pp. 133-141.

Ismail, A. and Al�Hapis Abdul Razak, M. and Mustapha, M. and Zaki Abdullah, M. and Hussain, P. and Mohamed Saat, A. and Ayub, F. and Muaz bin Mohd Faisal, M. (2023) Optimisation of Fe-Al Diffusion Bonding in Air. Lecture Notes in Mechanical Engineering. pp. 955-964.

Baharudin, B.A. and Mustapha, M. and Ismail, A. and Zulkipli, F.N. and Ayob, F. and Ahmad, A. (2023) Residual Stress Optimization of Friction Stir Welding on an AA5052 Thin Plate. Advanced Structured Materials, 165. pp. 143-151.

Dunggat, D. and Nawi, I.M. and Ba Hashwan, S.S. and Khir, M.H.M. and Sadale, I.M. and Isyaku Bature, U. and Razali, A.I. and Ismail, A. and Isa, A.F.A.M. and Mansor, M.H.I.A. (2023) Unmanned Surface Vehicle for Water Wastes Collection. In: UNSPECIFIED.

Baharudin, B.A. and Mustapha, M. and Azman, M.A. and Shamsuddin, A.N. and Ismail, A. and Tuan Anuwa, T.M.N. and Ab Rahman, F. and Ayob, F. and Hamid, D.A. and Rojan, M.A. (2022) The Effect of Process Temperature and Holding Time on Weldability in Diffusion Welding of Duplex Stainless Steels and Marine Grade Steels for Oil and Gas Pipes. Advanced Structured Materials, 167. ISSN 18698433

Baharudin, B.A. and Ayob, F. and Abdul Rahim, A. and Mustapha, M. and Ismail, A. and Ab Rahman, F. and Ismail, A. (2022) Investigation on the Mechanical and Microstructural Characteristics of Diffusional Bonded Gray Cast Iron and Low Carbon Steel. Advanced Structured Materials, 167. pp. 245-262. ISSN 18698433

Ismail, A. and Othman, N.H. and Mustapha, M. and Mohamed Saheed, M.S. and Abdullah, Z. and Muhammed, M. and Mohamed Saat, A. and Mustapha, F. (2022) Mechanical Performance and Corrosion Behaviour of Diffusion-Bonded A5083 Aluminium and A36 Mild Steel with Gallium Interlayer. Materials, 15 (18). ISSN 19961944

Razak, M.A.A.A. and Ismail, A. and Rahman, F.A. and Baharudin, B.A. and Khalili, M.A. and Rahim, M.Y.M. and Awang, M. (2021) Experimental Study on Self-Supported Friction Stir Welding on AA5083 Plate Butt Joints. Advanced Structured Materials, 147. pp. 293-298. ISSN 18698433

Lotpy, M.A.M.N. and Ismail, A. and Rahman, F.A. and Puteri Zarina, M.K. and Baharudin, B.A. and Awang, M. and Hamid, D.A. (2021) Optimization of Welding Parameters for Self-Support Friction Stir Welding (SS-FSW) on AA6063 Pipe Joints. Advanced Structured Materials, 147. pp. 299-306. ISSN 18698433

Ismail, A. and Bahanan, W. and Hussain, P.B. and Saat, A.M. and Shaik, N.B. (2020) Diusion bonding of Al-Fe enhanced by gallium. Processes, 8 (7). ISSN 22279717

Ismail, A. and Awang, M. and Zuhir, M.S.M. and Rahman, F.A. and Baharudin, B.A. and Puteri Zarina, M.K. and Hamid, D.A. and Rojan, M.A. and Dahalan, W.M. (2020) Friction Stir Welding on AA5083 Tee Joint in 1F Position. Lecture Notes in Mechanical Engineering. pp. 351-360. ISSN 21954356

Yahya, N. and Nyuk, C.M. and Ismail, A.F. and Hussain, N. and Rostami, A. and Ismail, A. and Ganeson, M. and Ali, A.M. (2020) Inversion algorithm of fiber bragg grating for nanofluid flooding monitoring. Sensors (Switzerland), 20 (4). ISSN 14248220

Ismail, A. and Chen, H.C. and Faye, I. and Tang, T.B. (2020) Longitudinal effects of common carotid artery stenosis on ocular hemodynamics assessed using laser speckle flowgraphy in a rabbit model. Scientific Reports, 10 (1). ISSN 20452322

Alhawari, A.R.H. and Almawgani, A.H.M. and Alghamdi, H. and Hindi, A.T. and Saeidi, T. and Ismail, A. (2020) Omega-shaped tag antenna with inductively-coupled feeding using U-shaped stepped-impedance resonators for RFID applications. Applied Computational Electromagnetics Society Journal, 35 (8). pp. 951-961. ISSN 10544887

Mahmood, S.N. and Ishak, A.J. and Saeidi, T. and Alsariera, H. and Alani, S. and Ismail, A. and Soh, A. (2020) Recent Advances in Wearable Antenna Technologies: A Review. Progress In Electromagnetics Research B, 89. pp. 1-27. ISSN 19376472

Baharudin, B.A. and Hussain, P. and Mustapha, M. and Ayob, F. and Ismail, A. and Ab Rahman, F. and Khalid, P.Z.M. and Hamid, D.A. and Rojan, M.A. (2020) Tensile Properties of Diffusion Bonded Duplex Stainless Steel to Low Carbon Steel. Lecture Notes in Mechanical Engineering. pp. 333-338. ISSN 21954356

Ismail, A. and Awang, M. and Rahman, F.A. and Megat Khalid, P.Z. and Baharudin, B.A. and Rojan, M.A. and Hamid, D.A. (2019) The Effects of Welding Parameters on Macro and Micro-Structure of Friction Stir Welded Aluminium. In: UNSPECIFIED.

Ismail, A. and Tang, T.B. and Ibrahima, F. and Cheng, C.H. (2018) Animal Model - Investigation of Laser Speckle Flowgraphy for Early Carotid Artery Stenosis Detection. In: UNSPECIFIED.

Ismail, A. and Awang, M. and Rahman, F.A. and Baharudin, B.A. and Khalid, P.Z.M. and Hamid, D.A. (2018) Evaluation of the hardness distribution and fracture location in friction stir welded AA6063 pipe butt joints. Advanced Structured Materials, 85. pp. 439-444. ISSN 18698433

Ismail, A. and Hussain, P. and Mustapha, M. and Nuruddin, M.F. and Saat, A.M. and Abdullah, A. and Rahim, A.A.A. and Chevalier, S. (2018) Fe-Al diffusion bonding: Effect of reaction time on the interlayer thickness. Journal of Mechanical Engineering, 5 (Specia). pp. 80-91. ISSN 18235514

Ismail, A. and Bhatti, M.S. and Faye, I. and Lu, C.K. and Laude, A. and Tang, T.B. (2018) Pulse waveform analysis on temporal changes in ocular blood flow due to caffeine intake: a comparative study between habitual and non-habitual groups. Graefe's Archive for Clinical and Experimental Ophthalmology, 256 (9). pp. 1711-1721. ISSN 0721832X

Ismail, A. and Cheong, L.Y. and Makhlof, S.A. and Allosh, M. (2018) Theoretical Study on Carbon Isotopes. In: UNSPECIFIED.

Ismail, A. and Awang, M. and Rahman, F.A. and Baharudin, B.A. and Khalid, P.Z.M. and Hamid, D.A. and Ahmad, K. (2018) The mapping of full weld cycle heat profile for friction stir welding pipe butt joints. Advanced Structured Materials, 85. pp. 461-467. ISSN 18698433

Arifin, M.H. and Jamaluddin, T.A. and Husin, H. and Ismail, A. and Abbas, A.A. and Nordin, M.N.M. and Baioumy, H.M. and Kayode, J.S. and Ismail, N. and Othman, N.A. and Setu, A. and Sulaiman, M.A.A. (2016) Comparison of geological mapping with electrical resistivity and ground penetration radar methods for rock fractured system study. Chiang Mai Journal of Science, 43 (6Speci). pp. 1346-1357. ISSN 01252526

Awang, M. and Ismail, A. and Zaman, M.A.K. (2016) Effect of process parameters on the strength of swept friction stir spot welded plates. Advanced Structured Materials, 61. pp. 105-110. ISSN 18698433

Saeidi, T. and Ismail, I. and Alhawari, A.R.H. and Sali, A. and Ismail, A. (2016) High gain dual-band couple feed transparent THz antenna for satellite communications. In: UNSPECIFIED.

Cheong, L.Y. and Ismail, A. and Tammam, M. and Yahya, N. (2016) Reliability of the single folding potential to describe the elastic scattering data of the p+43 Ca system. In: UNSPECIFIED.

Ismail, A. and Awang, M. and Hamid, D.A. and Ab Rahman, F. and Khalid, P.Z.M. (2016) Temperature profile and fracture location of friction stir welded AA6063-T6 pipe butt joint. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13305-13308. ISSN 18196608

Ismail, A. and Awang, M. and Rojan, M.A. and Samsudin, S.H. (2016) The characteristic of temperature curves for friction stir welding of aluminium alloy 6063-T6 pipe during tool plunging stage. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 277-280. ISSN 18196608

Ismail, A. and Awang, M. and Samsudin, S.H. and Rojan, M.A. and Jasri, M.A.H.M. (2016) The hardness variation due to secondary heating in friction stir welding of small diameter aluminium alloy 6063 pipe. Advanced Structured Materials, 61. pp. 87-94. ISSN 18698433

Ikram, I.M. and Ismail, A. and Zakaria, A. and Awang, M. and Rojan, M.A. and Hamid, D.A. and Makhtar, M.F. and Said, M.T.S.M. (2016) A preliminary experimental study of underwater Friction Stir Welding AA5083 plate butt joint. Journal of Environmental Science and Technology, 9 (6). pp. 462-466. ISSN 19947887

Ismail, A. and Lee, Y.C. and Tammam, M. (2015) Elastic scattering analysis of p+40 Ca at incident energies from threshold to 48.4 MeV and nuclear matter radius. International Journal of Modern Physics E, 24 (7). ISSN 02183013

Ismail, A. and Lee, Y.C. and Mahmoud, Z.M.M. (2015) Puzzle of the folding potential on the nuclear halo reactions. International Journal of Modern Physics E, 24 (4). ISSN 02183013

Ismail, A. and Awang, M. and Samsudin, S.H. (2015) The influence of process parameters on the temperature profile of friction stir welded aluminium alloy 6063-T6 pipe butt joint. Advanced Structured Materials, 70. pp. 243-249. ISSN 18698433

Ismail, A. and Awang, M. (2014) Surface hardness of friction stir welded AA6063 pipe. In: UNSPECIFIED.