Items where Author is "Irfan, M."

Group by: Item Type | No Grouping
Number of items: 95.

Article

Irfan, M. and Alaloul, W.S. and Ghufran, M. and Yaseen, G. and Thaheem, M.J. and Qureshi, A.H. and Bilal, M. (2024) Analyzing the impact of organizational culture on social sustainability: a perspective of the construction industry. Environment, Development and Sustainability, 26 (1). pp. 1103-1133. ISSN 1387585X

Ghanim, A.A.J. and Waqas, S. and Zeeshan, M.H. and Khan, J.A. and Ghalib, S.A. and Irfan, M. and Rahman, S. and Faraj Mursal, S.N. and Jalalah, M. and Almawgani, A.H.M. (2024) Nanofiltration PVP Membrane with Gradient Cross-Linking for Efficient Polycyclic Aromatic Hydrocarbons Removal. ACS Omega, 9 (5). pp. 5265-5272.

Athar, M. and Shariff, A.M. and Rashid, M.I. and Aadil, M.A. and Umer, A. and Irfan, M. (2024) Sustainable process design for heat exchanger network considering inherent safety and process economics. Canadian Journal of Chemical Engineering. ISSN 00084034

Irfan, M. and Khan, J.A. and Al-Kayiem, H.H. and Waqas, S. and Aleem, W. and Rozali, N.E.M. and Qamar, S. and Ghanim, A.A.J. and Ginter-Kramarczyk, D. and Legutko, S. and Kruszelnicka, I. and Rahman, S. (2023) Characteristics of Malaysian Crude Oils and Measurement of ASP Flooded Water in Oil Emulsion Stability and Viscosity in Primary Separator. Water (Switzerland), 15 (7).

Nawaz, R. and Ullah, H. and Ghanim, A.A.J. and Irfan, M. and Anjum, M. and Rahman, S. and Ullah, S. and Abdel Baki, Z. and Kumar Oad, V. (2023) Green Synthesis of ZnO and Black TiO2 Materials and Their Application in Photodegradation of Organic Pollutants. ACS Omega, 8 (39). pp. 36076-36087.

Musarat, M.A. and Alaloul, W.S. and Irfan, M. and Sreenivasan, P. and Rabbani, M.B.A. (2023) Health and Safety Improvement through Industrial Revolution 4.0: Malaysian Construction Industry Case. Sustainability (Switzerland), 15 (1).

Abdalla, E.A.H. and Kumar, M. and Abdalla, I.I. and Mohamed, S.E.G. and Soomro, A.M. and Irfan, M. and Rahman, S. and Nowakowski, G. (2023) Modeling and Optimization of Isolated Combined Heat and Power Microgrid for Managing Universiti Teknologi PETRONAS Energy. IEEE Access, 11. pp. 74388-74409.

Ahmad, T. and Iqbal, J. and Bustam, M.A. and Babar, M. and Tahir, M.B. and Sagir, M. and Irfan, M. and Anwaar Asghar, H.M. and Hassan, A. and Riaz, A. and Chuah, L.F. and Bokhari, A. and Mubashir, M. and Show, P.L. (2023) Performance evaluation of phosphonium based deep eutectic solvents coated cerium oxide nanoparticles for CO2 capture. Environmental Research, 222.

Zafar, M. and Sakidin, H. and Sheremet, M. and Dzulkarnain, I.B. and Hussain, A. and Nazar, R. and Khan, J.A. and Irfan, M. and Said, Z. and Afzal, F. and Al-Yaari, A. (2023) Recent Development and Future Prospective of Tiwari and Das Mathematical Model in Nanofluid Flow for Different Geometries: A Review. Processes, 11 (3).

Irfan, M. and Ghalib, S.A. and Waqas, S. and Khan, J.A. and Rahman, S. and Faraj Mursal, S.N. and Ghanim, A.A.J. (2023) Response Surface Methodology for the Synthesis and Characterization of Bio-Oil Extracted from Biomass Waste and Upgradation Using the Rice Husk Ash Catalyst. ACS Omega, 8 (20). pp. 17869-17879.

Musarat, M.A. and Irfan, M. and Alaloul, W.S. and Maqsoom, A. and Ghufran, M. (2023) A Review on the Way Forward in Construction through Industrial Revolution 5.0. Sustainability (Switzerland), 15 (18).

Alsaiari, M. and Nwafor, B.O. and Hermana, M. and Hassan H. M, A.M. and Irfan, M. (2023) Understanding the Mechanisms of Earth Fissuring for Hazard Mitigation in Najran, Saudi Arabia. Sustainability (Switzerland), 15 (7).

Irfan, M. and Alaloul, W.S. and Ghufran, M. and Yaseen, G. and Thaheem, M.J. and Qureshi, A.H. and Bilal, M. (2022) Analyzing the impact of organizational culture on social sustainability: a perspective of the construction industry. Environment, Development and Sustainability. ISSN 1387585X

Irfan, M. and Waqas, S. and Khan, J.A. and Rahman, S. and Kruszelnicka, I. and Ginter-Kramarczyk, D. and Legutko, S. and Ochowiak, M. and W�odarczak, S. and Czernek, K. (2022) Effect of Operating Parameters and Energy Expenditure on the Biological Performance of Rotating Biological Contactor for Wastewater Treatment. Energies, 15 (10). ISSN 19961073

Irfan, M. and Moniruzzaman, M. and Ahmad, T. and Samsudin, M.F.R. and Bashir, F. and Butt, M.T. and Ashraf, H. (2022) Identifying the role of process conditions for synthesis of stable gold nanoparticles and insight detail of reaction mechanism. Inorganic and Nano-Metal Chemistry, 52 (4). pp. 519-532. ISSN 24701556

Khan, R. and Ya, H.H. and Shah, I. and Niazi, U.M. and Ahmed, B.A. and Irfan, M. and Glowacz, A. and Pilch, Z. and Brumercik, F. and Azeem, M. and Alam, M.A. and Ahmed, T. (2022) Influence of Elbow Angle on Erosion-Corrosion of 1018 Steel for Gas�Liquid�Solid Three Phase Flow. Materials, 15 (10). ISSN 19961944

Ali, S. and Irfan, M. and Niazi, U.M. and Rani, A.M.A. and Rashedi, A. and Rahman, S. and Khan, M.K.A. and Alsaiari, M.A. and Legutko, S. and Petrů, J. and Trefil, A. (2022) Microstructure and Mechanical Properties of Modified 316L Stainless Steel Alloy for Biomedical Applications Using Powder Metallurgy. Materials, 15 (8). ISSN 19961944

Ghanim, A.A.J. and Beddu, S. and Abd Manan, T.S.B. and Al Yami, S.H. and Irfan, M. and Mursal, S.N.F. and Mohd Kamal, N.L. and Mohamad, D. and Machmudah, A. and Yavari, S. and Mohtar, W.H.M.W. and Ahmad, A. and Rasdi, N.W. and Khan, T. (2022) Prediction of Runoff in Watersheds Located within Data-Scarce Regions. Sustainability (Switzerland), 14 (13). ISSN 20711050

Ahmad, T. and Bustam, M.A. and Suleman, H. and Irfan, M. and Iqbal, J. and Asghar, H.M.A. (2022) Quantitative Estimation of Biocapped Surface Chemistry Driven Interparticle Interactions and Growth Kinetics of Gold Nanoparticles. Journal of Cluster Science, 33 (2). pp. 557-565. ISSN 10407278

Irfan, M. and Waqas, S. and Arshad, U. and Khan, J.A. and Legutko, S. and Kruszelnicka, I. and Ginter-Kramarczyk, D. and Rahman, S. and Skrzypczak, A. (2022) Response Surface Methodology and Artificial Neural Network Modelling of Membrane Rotating Biological Contactors for Wastewater Treatment. Materials, 15 (5). ISSN 19961944

Sheikh, M.A. and Bakhsh, S.T. and Irfan, M. and Nor, N.M. and Nowakowski, G. (2022) A Review to Diagnose Faults Related to Three-Phase Industrial Induction Motors. Journal of Failure Analysis and Prevention, 22 (4). pp. 1546-1557. ISSN 15477029

Baba, M. and Nor, N.B.M. and Sheikh, M.A. and Nowakowski, G. and Masood, F. and Rehman, M. and Irfan, M. and Arefin, A.A. and Kumar, R. and Baba, A.M. (2022) A review of the importance of synchrophasor technology, smart grid, and applications. Bulletin of the Polish Academy of Sciences: Technical Sciences, 70 (6). ISSN 02397528

Khan, M.K.A. and Khan, J.A. and Ullah, H. and Al-Kayiem, H.H. and Irawan, S. and Irfan, M. and Glowacz, A. and Liu, H. and Glowacz, W. and Rahman, S. (2021) De-emulsification and gravity separation of micro-emulsion produced with enhanced oil recovery chemicals flooding. Energies, 14 (8). ISSN 19961073

Bashir, F. and Irfan, M. and Ahmad, T. and Iqbal, J. and Butt, M.T. and Sadef, Y. and Umbreen, M. and Shaikh, I.A. and Moniruzzaman, M. (2021) Efficient utilization of low cost agro materials for incorporation of copper nanoparticles to scrutinize their antibacterial properties in drinking water. Environmental Technology and Innovation, 21. ISSN 23521864

Irfan, M. and Shafeeq, A. and Nasir, T.S. and Bashir, F. and Ahmad, T. and Abbas, N. and Butt, M.T. and Deeba, F. (2021) Evaluation of enhancement factor for removal of heavy metal ions from water through adsorption by non-activated and activated carbon prepared from rice husk. Pakistan Journal of Scientific and Industrial Research Series A: Physical Sciences, 64 (3). pp. 206-213. ISSN 22216413

Zaman, S.U. and Saif-ur-Rehman and Zaman, M.K.U. and Rafiq, S. and Arshad, A. and Khurram, M.S. and Irfan, M. and Saqib, S. and Muhammad, N. and Irfan, M. and Sharif, F. and Bustam, M.A. and Jamal, M. and Khan, M.A. and Waseem, M.A. and Mukhtar, A. and Wajeeh, S. (2021) Fabrication and performance evaluation of polymeric membrane using blood compatible hydroxyapatite for artificial kidney application. Artificial Organs, 45 (11). pp. 1377-1390. ISSN 0160564X

A, A. and Irfan, M. and Saad, N. (2021) The Fault Detection of Gears of Electromechanical Power Transmission System using Frequency Domain Approach. Renewable Energy and Power Quality Journal, 19 (2). pp. 184-188. ISSN 2172038X

Baba, M. and Nor, N.B.M. and Sheikh, M.A. and Baba, A.M. and Irfan, M. and Glowacz, A. and Kozik, J. and Kumar, A. (2021) Optimization of phasor measurement unit placement using several proposed case factors for power network monitoring. Energies, 14 (18). ISSN 19961073

Rahman, S. and Nawaz, R. and Khan, J.A. and Ullah, H. and Irfan, M. and Glowacz, A. and Lyp-Wronska, K. and Wzorek, L. and Khan, M.K.A. and Jalalah, M. and Alsaiari, M.A. and Almawgani, A.H. (2021) Synthesis and characterization of carbon and carbon-nitrogen doped black tio2 nanomaterials and their application in sonophotocatalytic remediation of treated agro-industrial wastewater. Materials, 14 (20). ISSN 19961944

Irfan, M. and Nawaz, R. and Khan, J.A. and Ullah, H. and Haneef, T. and Legutko, S. and Rahman, S. and Józwik, J. and Alsaiari, M.A. and Khan, M.K.A. and Mursal, S.N.F. and Alkahtani, F.S. and Alshorman, O. and Ghanim, A.A.J. (2021) Synthesis and characterization of manganese-modified black TiO2 nanoparticles and their performance evaluation for the photodegradation of phenolic compounds from wastewater. Materials, 14 (23). ISSN 19961944

Ali, S. and Irfan, M. and Niazi, U.M. and Rani, A.M.A. and Shah, I. and Legutko, S. and Rahman, S. and Jalalah, M. and Alsaiari, M.A. and Glowacz, A. and Alkahtani, F.S. (2021) Synthesis, surface nitriding and characterization of ti-nb modified 316l stainless steel alloy using powder metallurgy. Materials, 14 (12). ISSN 19961944

Ahmad, T. and Iqbal, J. and Bustam, M.A. and Irfan, M. and Anwaar Asghar, H.M. (2021) A critical review on phytosynthesis of gold nanoparticles: Issues, challenges and future perspectives. Journal of Cleaner Production, 309. ISSN 09596526

Irfan, M. and Stephen, K.D. and Lenn, C.P. (2021) An experimental study to investigate novel physical mechanisms that enhance viscoelastic polymer flooding and further increase desaturation of residual oil saturation. Upstream Oil and Gas Technology, 6. ISSN 26662604

Zaffar, M. and Hashmani, M.A. and Habib, R. and Quraishi, K.S. and Irfan, M. and Alqhtani, S. and Hamdi, M. (2021) A hybrid feature selection framework for predicting students performance. Computers, Materials and Continua, 70 (1). pp. 1893-1920. ISSN 15462218

Yar, A. and Dennis, J.O. and Yasin, A. and Din, F.U. and Irfan, M. and Khan, M.S. and Yang, C.-C. and Jose, R. (2021) The solar reduction of graphene oxide on a large scale for high density electrochemical energy storage. Sustainable Energy and Fuels, 5 (10). pp. 2724-2733. ISSN 23984902

Khan, J.A. and Irfan, M. and Irawan, S. and Yao, F.K. and Shokor Abdul Rahaman, Md. and Shahari, A.R. and Glowacz, A. and Zeb, N. (2020) Comparison of machine learning classifiers for accurate prediction of real-time stuck pipe incidents. Energies, 13 (14). ISSN 19961073

Abd Manan, T.S.B. and Khan, T. and Wan Mohtar, W.H.M. and Beddu, S. and Mohd Kamal, N.L. and Yavari, S. and Jusoh, H. and Qazi, S. and Imam Supaat, S.K.B. and Adnan, F. and Ghanim, A.A. and Yavari, S. and Machmudah, A. and Rajabi, A. and Porhemmat, M. and Irfan, M. and Abdullah, M.T. and Abdul Shakur, E.S.B. (2020) Dataset on specific UV absorbances (SUVA254) at stretch components of Perak River basin. Data in Brief, 30. ISSN 23523409

Irfan, M. and Moniruzzaman, M. and Ahmad, T. and Mandal, P.C. and Abdullah, B. and Bhattacharjee, S. (2020) Growth kinetic study of ionic liquid mediated synthesis of gold nanoparticles using Elaeis guineensis (oil palm) kernels extract under microwave irradiation. Arabian Journal of Chemistry, 13 (1). pp. 620-631. ISSN 18785352

Saggu, M.H. and Sheikh, N.A. and Niazi, U.M. and Irfan, M. and Glowacz, A. and Legutko, S. (2020) Improved analysis on the fin reliability of a plate fin heat exchanger for usage in lng applications. Energies, 13 (14). ISSN 19961073

Naseer, A. and Hamid, A. and Ghauri, M. and Nasrullah, A. and Iqbal, J. and Shah, N.S. and Rafiq, S. and Irfan, M. and Muhammad, N. (2020) Lignin/alginate/hydroxyapatite composite beads for the efficient removal of copper and nickel ions from aqueous solutions. Desalination and Water Treatment, 184. pp. 199-213. ISSN 19443994

Ahmad, T. and Iqbal, J. and Bustam, M.A. and Zulfiqar, M. and Muhammad, N. and Al Hajeri, B.M. and Irfan, M. and Anwaar Asghar, H.M. and Ullah, S. (2020) Phytosynthesis of cerium oxide nanoparticles and investigation of their photocatalytic potential for degradation of phenol under visible light. Journal of Molecular Structure, 1217. ISSN 00222860

Saggu, M.H. and Sheikh, N.A. and Niazi, U.M. and Irfan, M. and Glowacz, A. (2020) Predicting the structural reliability of LNG processing plate-fin heat exchanger for energy conservation. Energies, 13 (9). ISSN 19961073

Alshorman, O. and Irfan, M. and Saad, N. and Zhen, D. and Haider, N. and Glowacz, A. and Alshorman, A. (2020) A Review of Artificial Intelligence Methods for Condition Monitoring and Fault Diagnosis of Rolling Element Bearings for Induction Motor. Shock and Vibration, 2020. ISSN 10709622

Irfan, M. and Ahmad, T. and Moniruzzaman, M. and Bhattacharjee, S. and Abdullah, B. (2020) Size and stability modulation of ionic liquid functionalized gold nanoparticles synthesized using Elaeis guineensis (oil palm) kernel extract. Arabian Journal of Chemistry, 13 (1). pp. 75-85. ISSN 18785352

Baba, M. and Nor, N.B.M. and Sheikh, M.A. and Irfan, M. and Tahir, M. (2020) A strategic and significant method for the optimal placement of phasor measurement unit for power system network. Symmetry, 12 (7). ISSN 20738994

Irfan, M. and Alwadie, A. and Saad, N. and Sheikh, M.A. (2019) Analysis of bearing faulty cage using non-intrusive condition monitoring techniques. Renewable Energy and Power Quality Journal, 17. pp. 20-25. ISSN 2172038X

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. and Alwadie, A. (2019) Analysis of distributed faults in inner and outer race of bearing via Park vector analysis method. Neural Computing and Applications, 31. pp. 683-691. ISSN 09410643

Irfan, M. and Saad, N. and Alwadie, A. and Awais, M. and Aman Sheikh, M. and Glowacz, A. and Kumar, V. (2019) An Automated Feature Extraction Algorithm for Diagnosis of Gear Faults. Journal of Failure Analysis and Prevention, 19 (1). pp. 98-105. ISSN 15477029

Ahmad, T. and Bustam, M.A. and Irfan, M. and Moniruzzaman, M. and Samsudin, M.F.R. and Asghar, H.M.A. and Muhammad, N. and Iqbal, J. and Bhattacharjee, S. (2019) Effect of gold and iron nanoparticles on photocatalytic behaviour of titanium dioxide towards 1-butyl-3-methylimidazolium chloride ionic liquid. Journal of Molecular Liquids, 291. ISSN 01677322

Ahmad, T. and Bustam, M.A. and Irfan, M. and Moniruzzaman, M. and Asghar, H.M.A. and Bhattacharjee, S. (2019) Mechanistic investigation of phytochemicals involved in green synthesis of gold nanoparticles using aqueous Elaeis guineensis leaves extract: Role of phenolic compounds and flavonoids. Biotechnology and Applied Biochemistry, 66 (4). pp. 698-708. ISSN 08854513

Magzoub, M. and Saad, N. and Ibrahim, R. and Irfan, M. (2019) An experimental demonstration of hybrid fuzzy-fuzzy space-vector control on AC variable speed drives. Neural Computing and Applications, 31. pp. 777-792. ISSN 09410643

Ur Rehman, Z. and Yahya, N. and Qureshi, S. and Alqasem, B. and Irfan, M. (2018) CO2 mixture adsorption at single-walled carbon nanotube: Effects from different gases and stoichiometric ratios. Journal of Computational and Theoretical Nanoscience, 15 (6-7). pp. 1892-1897. ISSN 15461955

Ahmad, T. and Bustam, M.A. and Irfan, M. and Moniruzzaman, M. and Asghar, H.M.A. and Bhattacharjee, S. (2018) Effect of volume of gold chloroauric acid on size, shape and stability of biosynthesized AuNPs using aqueous Elaeis guineensis (oil palm) leaves extract. International Journal of Automotive and Mechanical Engineering, 15 (1). pp. 5135-5145. ISSN 22298649

Ahmad, T. and Bustam, M.A. and Irfan, M. and Moniruzzaman, M. and Anwaar Asghar, H.M. and Bhattacharjee, S. (2018) Green synthesis of stabilized spherical shaped gold nanoparticles using novel aqueous Elaeis guineensis (oil palm) leaves extract. Journal of Molecular Structure, 1159. pp. 167-173. ISSN 00222860

Yahya, N. and Rehman, Z.U. and Shafie, A. and Alqasem, B. and Soleimani, H. and Irfan, M. and Qureshi, S. (2018) MWCNT for ambient urea synthesis. Physica B: Condensed Matter, 545. pp. 358-369. ISSN 09214526

Ahmad, T. and Bustam, M.A. and Irfan, M. and Moniruzzaman, M. and Asghar, H.M.A. and Bhattacharjee, S. (2018) Quantitative growth evolution of gold nanoparticles synthesized using aqueous Elaeis guineensis (oil palm) leaves extract. Materials Chemistry and Physics, 220. pp. 240-248. ISSN 02540584

Irfan, M. and Moniruzzaman, M. and Ahmad, T. and Osman, O.Y. and Mandal, P.C. and Bhattacharjee, S. and Hussain, M. (2018) Stability, interparticle interactions and catalytic performance of gold nanoparticles synthesized through ionic liquid mediated oil palm leaves extract. Journal of Environmental Chemical Engineering, 6 (4). pp. 5024-5031. ISSN 22133437

Sheikh, M.A. and Nor, N.M. and Ibrahim, T. and Irfan, M. (2018) Unsupervised on-line method to diagnose unbalanced voltage in three-phase induction motor. Neural Computing and Applications, 30 (12). pp. 3877-3892. ISSN 09410643

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. (2017) Condition monitoring of induction motors via instantaneous power analysis. Journal of Intelligent Manufacturing, 28 (6). pp. 1259-1267. ISSN 09565515

Qureshi, S. and Yahya, N. and Kait, C.F. and Alqasem, B. and ur Rehman, Z. and Irfan, M. (2017) Enhanced catalytic activity of α-Fe2O3 with the adsorption of gases for ammonia synthesis. Materials Science Forum, 880. pp. 15-18. ISSN 02555476

Irfan, M. and Moniruzzaman, M. and Ahmad, T. and Mandal, P.C. and Bhattacharjee, S. and Abdullah, B. (2017) Ionic liquid based extraction of flavonoids from Elaeis guineensis leaves and their applications for gold nanoparticles synthesis. Journal of Molecular Liquids, 241. pp. 270-278. ISSN 01677322

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. and Magzoub, M. (2017) An Online Fault Diagnosis System for Induction Motors via Instantaneous Power Analysis. Tribology Transactions, 60 (4). pp. 592-604. ISSN 10402004

Yahya, N. and Alqasem, B. and Irfan, M. and Qureshi, S. and Rehman, Z.U. and Shafie, A. and Soleimani, H. (2017) The effect of saturation magnetization of nanocatalyst and oscillating magnetic field for green urea synthesis. Physica B: Condensed Matter, 507. p. 95. ISSN 09214526

Alqasem, B. and Yahya, N. and Qureshi, S. and Irfan, M. and Ur Rehman, Z. and Soleimani, H. (2017) The enhancement of the magnetic properties of α-Fe2O3 nanocatalyst using an external magnetic field for the production of green ammonia. Materials Science and Engineering: B, 217. pp. 49-62. ISSN 09215107

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. and Nor, N.M. and Alwadie, A. and Sheikh, M.A. (2017) A hardware and software integration approach for development of a non-invasive condition monitoring systems for motor-coupled gears faults diagnosis. Communications in Computer and Information Science, 751. pp. 642-655. ISSN 18650929

Sheikh, M.A. and Nor, N.M. and Ibrahim, T. and Bakhsh, S.T. and Irfan, M. and Saad, N.B. (2017) An intelligent automated method to diagnose and segregate induction motor faults. Journal of Electrical Systems, 13 (2). pp. 241-254. ISSN 11125209

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. and Magzoub, M. (2016) An Intelligent Fault Diagnosis of Induction Motors in an Arbitrary Noisy Environment. Journal of Nondestructive Evaluation, 35 (1). pp. 1-13. ISSN 01959298

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. and Magzoub, M. and Hung, N.T. (2016) A Non-Invasive Method for Condition Monitoring of Induction Motors Operating Under Arbitrary Loading Conditions. Arabian Journal for Science and Engineering, 41 (9). pp. 3463-3471. ISSN 2193567X

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. and Hung, N.T. and Magzoub, M.A. (2015) Analysis of Bearing Surface Roughness Defects in Induction Motors. Journal of Failure Analysis and Prevention, 15 (5). pp. 730-736. ISSN 15477029

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. (2015) An on-line condition monitoring system for induction motors via instantaneous power analysis. Journal of Mechanical Science and Technology, 29 (4). pp. 1483-1492. ISSN 1738494X

Conference or Workshop Item

Musarat, M.A. and Alaloul, W.S. and Altaf, M. and Alzubi, K.M. and Irfan, M. and Alawag, A.M. (2022) Supply Chain Management in Green Construction: A Systematic Review. In: UNSPECIFIED.

Irfan, M. and Saad, N. and Ali, A. and Vinoth Kumar, K. and Aman Sheikh, M. and Awais, M. (2019) A Condition Monitoring System for the Analysis of Bearing Distributed Faults. In: UNSPECIFIED.

Irfan, M. and Ahmad, T. and Moniruzzaman, M. and Abdullah, B. (2018) Ionic liquid functionalized synthesis of gold nanoparticles in response to Elaise Guineensis (oil palm) leaves amount. In: UNSPECIFIED.

Sheikh, M.A. and Saad, N.R. and Mohd Nor, N.B. and Tahir Rakhsh, S. and Irfan, M. (2018) An Unsupervised Automated Method to Diagnose Industrial Motors Faults. In: UNSPECIFIED.

Irfan, M. and Ahmad, T. and Moniruzzaman, M. and Abdullah, B. (2017) Effect of pH on ionic liquid mediated synthesis of gold nanoparticle using elaiseguineensis (palm oil) kernel extract. In: UNSPECIFIED.

Magzoub, M. and Saad, N. and Ibrahim, R. and Irfan, M. (2017) A genetic algorithm optimization of hybrid fuzzy-fuzzy rules in induction motor control. In: UNSPECIFIED.

Rehman, Z.U. and Yahya, N. and Shafie, A. and Soleimani, H. and Alqasim, B.H. and Irfan, M. and Qureshi, S. (2016) Band gap and conductivity evaluation of carbon nanotube with hematite for green ammonia synthesis. In: UNSPECIFIED.

Yahya, N. and Irfan, M. and Shafie, A. and Soleimani, H. and Alqasem, B. and Rehman, Z.U. and Qureshi, S. (2016) DFT study of gases adsorption on sharp tip nano-catalysts surface for green fertilizer synthesis. In: UNSPECIFIED.

Ahmad, T. and Irfan, M. and Bustam, M.A. and Bhattacharjee, S. (2016) Effect of Reaction Time on Green Synthesis of Gold Nanoparticles by Using Aqueous Extract of Elaise Guineensis (Oil Palm Leaves). In: UNSPECIFIED.

Irfan, M. and Yahya, N. and Shafie, A. and Soleimani, H. and Alqasem, B. and Rehman, Z.U. and Qureshi, S. (2016) Evaluation of synthesis characterization and simulation study of magnetic nanoparticles for ammonia synthesis in MIM. In: UNSPECIFIED.

Alqasem, B. and Yahya, N. and Soleimani, H. and Qureshi, S. and Irfan, M. and Rehman, Z.U. (2016) Experimental study on the effect of saturation magnetization of hematite nanocatalyst for green ammonia production. In: UNSPECIFIED.

Irfan, M. and Ahmad, T. and Moniruzzaman, M.M. and Abdullah, B.B. and Bhattacharjee, S. (2016) Ionic Liquid Mediated Biosynthesis of Gold Nanoparticles Using Elaeis Guineensis (Oil Palm) Leaves Extract. In: UNSPECIFIED.

Ahmad, T. and Irfan, M. and Bhattacharjee, S. (2016) Parametric Study on Gold Nanoparticle Synthesis Using Aqueous Elaise Guineensis (Oil palm) Leaf Extract: Effect of Precursor Concentration. In: UNSPECIFIED.

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. and Magzoub, M. and Hung, N.T. (2016) An approach to diagnose inner race surface roughness defects in bearing of induction motors. In: UNSPECIFIED.

Hung, N.T. and Ismail, I. and Saad, N.B. and Tufa, L. and Irfan, M. (2015) Design of optimal GBN sequences for identification of MIMO systems. In: UNSPECIFIED.

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. and Tuan Hung, N. (2015) Diagnosis of distributed faults in outer race of bearings via Park's transformation method. In: UNSPECIFIED.

Magzoub, M.A. and Saad, N.B. and Ibrahim, R.B. and Irfan, M. (2015) The effects of internal and external disturbances for the hybrid fuzzy-fuzzy controller applied to IM-drive. In: UNSPECIFIED.

Nguyen, T.H. and Ismail, I. and Saad, N.B. and Faisal, A. and Irfan, M. (2015) A practical approach of control of real time nonlinear process plant using Multiple Model Predictive Control. In: UNSPECIFIED.

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. and Hung, N.T. (2014) Analysis of bearing outer race defects in induction motors. In: UNSPECIFIED.

Hung, N.T. and Ismail, I. and Saad, N.B. and Ibrahim, R. and Irfan, M. (2014) Design of Multi Model Predictive Control for nonlinear process plant. In: UNSPECIFIED.

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. and Hung, N.T. (2014) A non invasive fault diagnosis system for induction motors in noisy environment. In: UNSPECIFIED.

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. (2013) AC motor fault diagnosis at incipient stage using programmable logic controller. In: UNSPECIFIED.

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. (2013) Development of an intelligent condition monitoring system for AC induction motors using PLC. In: UNSPECIFIED.

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. (2013) An intelligent diagnostic system for the condition monitoring of AC motors. In: UNSPECIFIED.

Book

Musarat, M.A. and Irfan, M. and Ghufran, M. and Alaloul, W.S. (2024) Innovation in PMBOK through Industrial Revolution 4.0: An Automated Solution for the Construction Industry. CRC Press, pp. 1-216. ISBN 9781040015360; 9781032621746

This list was generated on Thu Dec 19 09:03:30 2024 +08.