Article

Khan, J.A. and Kim, J. and Irawan, S. and Permatasar, K.A. and Verdin, P.G. and Cai, B. and Yekeen, N. (2024) Application of foam assisted water-alternating-gas flooding and quantification of resistivity and water saturation by experiment and simulation to determine foam propagation in sandstone. Heliyon, 10 (3).

Sauki, A. and Megat Khamaruddin, P.N.F. and Irawan, S. and Kinif, I. and Ridha, S. and Aziz, R.A. and Wan Bakar, W.Z. (2023) Prophecy of Cutting Transport Ratio through a Relationship between Equivalent Circulating Density and Drilled Solid Concentration. Key Engineering Materials, 939. pp. 83-91.

Wayo, D.D.K. and Irawan, S. and Bin Mohamad Noor, M.Z. and Badrouchi, F. and Khan, J.A. and Duru, U.I. (2022) A CFD Validation Effect of YP/PV from Laboratory-Formulated SBMDIF for Productive Transport Load to the Surface. Symmetry, 14 (11). ISSN 20738994

Khan, J.A. and Irawan, S. and Dan, I.B.M. and Cai, B. (2022) Determining the difference of kick tolerance with single bubble and dynamic multiphase models: Evaluation of well-control with water/synthetic based muds. Ain Shams Engineering Journal, 13 (4). ISSN 20904479

Arain, A.H. and Ridha, S. and Suppiah, R.R. and Irawan, S. and Ilyas, S.U. (2022) Developing an efficient ester-based drilling fluid based on Calophyllum Inophyllum oil for eco-friendly drilling of unconventional shale formation. Journal of Petroleum Science and Engineering, 219. ISSN 09204105

Khan, M.K.A. and Khan, J.A. and Ullah, H. and Al-Kayiem, H.H. and Irawan, S. and Irfan, M. and Glowacz, A. and Liu, H. and Glowacz, W. and Rahman, S. (2021) De-emulsification and gravity separation of micro-emulsion produced with enhanced oil recovery chemicals flooding. Energies, 14 (8). ISSN 19961073

Sauki, A. and Faizura Megat Khamaruddin, P.N. and Irawan, S. and Kinif, I. and Ridha, S. and Ali, S.A. and Ali, M.A. (2021) Development of a modified Bourgoyne and Young model for predicting drilling rate. Journal of Petroleum Science and Engineering, 205. ISSN 09204105

Shafian, S.R.M. and Saaid, I.M. and Razali, N. and Salleh, I.K. and Irawan, S. (2021) Experimental investigation of colloidal silica nanoparticles (C-SNPs) for fines migration control application. Applied Nanoscience (Switzerland), 11 (7). pp. 1993-2008. ISSN 21905509

Jahari, A.F. and Shafian, S.R.M. and Husin, H. and Razali, N. and Irawan, S. (2021) Quantification method of suspended solids in micromodel using image analysis. Journal of Petroleum Exploration and Production, 11 (5). pp. 2271-2286. ISSN 21900558

Khan, J.A. and Irawan, S. and Seela Thurai, A. and Cai, B. (2021) Quantitative analysis of blowout preventer flat time for well control operation: Value added data aimed at performance enhancement. Engineering Failure Analysis, 120. ISSN 13506307

Abbas, G. and Irawan, S. and Memon, K.R. and Khan, J. (2020) Application of cellulose-based polymers in oil well cementing. Journal of Petroleum Exploration and Production Technology, 10 (2). pp. 319-325. ISSN 21900558

Khan, J.A. and Irfan, M. and Irawan, S. and Yao, F.K. and Shokor Abdul Rahaman, Md. and Shahari, A.R. and Glowacz, A. and Zeb, N. (2020) Comparison of machine learning classifiers for accurate prediction of real-time stuck pipe incidents. Energies, 13 (14). ISSN 19961073

Arain, A.H. and Irawan, S. and Ibrahim, A. and Rajeswary, R. (2020) Experimental investigation of capillary threshold pressure in shale. International Journal of Advanced Science and Technology, 29 (1). pp. 129-140. ISSN 20054238

Krishna, S. and Ridha, S. and Vasant, P. and Ilyas, S.U. and Irawan, S. and Gholami, R. (2020) Explicit flow velocity modelling of yield power-law fluid in concentric annulus to predict surge and swab pressure gradient for petroleum drilling applications. Journal of Petroleum Science and Engineering, 195. ISSN 09204105

Fadil, N.A. and Irawan, S. and Isa, N.A.M. and Shafian, S.R. (2020) Gelation behavior of polyacrylamide reinforced with nano-silica for water shutoff treatment in oil field. Solid State Phenomena, 307 SS. pp. 252-257. ISSN 10120394

Rahman, S.H.B.A. and Irawan, S. and Shafiq, N. and Rajeswary, R. (2020) Investigating the expansion characteristics of geopolymer cement samples in a water bath and compared with the expansion of ASTM Class-G cement. Heliyon, 6 (2). ISSN 24058440

Khan, J.A. and Irawan, S. and Padmanabhan, E. and Al-Kayiem, H.H. and Rai, S. (2020) Optimization of coiled tubing nozzle for sand removal from wellbore. Journal of Petroleum Exploration and Production Technology, 10 (1). pp. 53-66. ISSN 21900558

Sauki, A. and Khamaruddin, P.N.F.M. and Irawan, S. and Kinif, I. and Ridha, S. (2020) Statistical relationship of drilled solid concentration on drilling mud rheology. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 69 (1). pp. 122-136. ISSN 22897879

Biyanto, T.R. and Febriansyah, L.R. and Abdillah, A.I. and Perwira, H.Y. and Rizki, R.F. and Bethiana, T.N. and Irawan, S. (2019) Optimization of operating conditions of CO2-enhanced gas recovery and carbon sequestration. Journal of Petroleum Exploration and Production Technology, 9 (4). pp. 2689-2698. ISSN 21900558

Bin Mohamad Noor, M.Z. and Yi Teng, W. and Irawan, S. (2019) Stabilization of silicone dioxide nanoparticle foam in tertiary petroleum production. Indonesian Journal of Chemistry, 19 (4). pp. 985-992. ISSN 14119420

Irawan, S. and Shanmugam, A.K. and Hidayat, M.I.P. and Biyanto, T.R. (2019) Study of lateral vibration of drilling string with mass imbalance using finite element. International Journal on Advanced Science, Engineering and Information Technology, 9 (3). pp. 816-821. ISSN 20885334

bin Mohamad Noor, M.Z. and Chin, I.L.Y. and Irawan, S. (2019) Study of the transportation behavior of nanoparticles through low-porosity sand pack in the absence and presence of oil. Journal of Petroleum Exploration and Production Technology, 9 (4). pp. 2845-2851. ISSN 21900558

Hanamertani A.S., Sr. and Pilus, R.M. and Idris, A.K. and Irawan, S. and Tan, I.M. (2018) Ionic liquids as a potential additive for reducing surfactant adsorption onto crushed Berea sandstone. Journal of Petroleum Science and Engineering. pp. 480-490. ISSN 09204105

Hidayat, M.I.P. and Ariwahjoedi, B. and Parman, S. and Irawan, S. (2018) A Meshfree Approach for Transient Heat Conduction Analysis of Nonlinear Functionally Graded Materials. International Journal of Computational Methods, 15 (2). ISSN 02198762

Bataee, M. and Irawan, S. (2018) Porosity and permeability alteration around wellbore during injection process. International Journal of Geomechanics, 18 (2). ISSN 15323641

Kanesan, D. and Irawan, S. and Ridha, S. and Chandran, D. and Azhar, N.A.B. (2018) The suitability offly ashbased geopolymer cement for oil well cementing applications: A review. ARPN Journal of Engineering and Applied Sciences, 13 (20). pp. 8297-8316. ISSN 18196608

Bataee, M. and Irawan, S. and Namazi-saleh, F. and Ridha, S. (2017) Development of stress model near the wellbore using an iterative coupling method. International Journal of Geomechanics, 17 (2). ISSN 15323641

Chai, Y.H. and Yusup, S. and Chok, V.S. and Irawan, S. and Singh, J.S.D.B. (2017) Thermophysical properties of graphene nanosheets � Hydrogenated oil based nanofluid for drilling fluid improvements. Applied Thermal Engineering, 122. pp. 794-805. ISSN 13594311

Bataee, M. and Irawan, S. and Ridha, S. and Hematpour, H. and Hamdi, Z. (2017) Wellbore failure during water-alternating-gas injection by use of flow-stress coupling method. SPE Journal, 22 (1). pp. 172-183. ISSN 1086055X

Biyanto, T.R. and Kusuma, F. and Musyafa, A. and Noriyati, R.D. and Bayuaji, R. and da Costa, S. and Irawan, S. (2016) Correction factor determination on failure rate equation of MacLaurin series for low and high mode application. Ain Shams Engineering Journal, 7 (2). pp. 827-834. ISSN 20904479

Kinif, I. and Irawan, S. and Bharadwaj, A.M. (2016) Development and evaluation of solid control system to optimize drilling performance. Jurnal Teknologi, 78 (6-7). pp. 101-107. ISSN 01279696

Valliappan, A.K. and Suppiah, R.R. and Irawan, S. and Bayuaji, R. (2016) Development of new green cement for oil wells. Materials Science Forum, 841. pp. 148-156. ISSN 02555476

Chai, Y.H. and Yusup, S. and Chok, V.S. and Arpin, M.T. and Irawan, S. (2016) Investigation of thermal conductivity of multi walled carbon nanotube dispersed in hydrogenated oil based drilling fluids. Applied Thermal Engineering, 107. pp. 1019-1025. ISSN 13594311

Jassim, L. and Yunus, R. and Rashid, U. and Rashid, S.A. and Salleh, M.A. and Irawan, S. and Ghaemi, F. (2016) Synthesis and optimization of 2-ethylhexyl ester as base oil for drilling fluid formulation. Chemical Engineering Communications, 203 (4). pp. 463-470. ISSN 00986445

Bataee, M. and Irawan, S. and Ridha, S. (2016) Wellbore stability model based on iterative coupling method in water alternating gas injection. Journal of Petroleum Exploration and Production Technology, 6 (4). pp. 755-775. ISSN 21900558

Pao, W. and Khan, J.A. and Ofei, T.N. and Irawan, S. (2015) Fill removal from horizontal wellbore using foam in different coiled tubing/annulus diameter ratios. International Journal of Oil, Gas and Coal Technology, 9 (2). pp. 129-147. ISSN 17533309

Ofei, T.N. and Irawan, S. and Pao, W. (2015) Modelling of pressure drop in eccentric narrow horizontal annuli with the presence of cuttings and rotating drillpipe. International Journal of Oil, Gas and Coal Technology, 9 (1). pp. 39-60. ISSN 17533309

Ofei, T.N. and Irawan, S. and Pao, W. and Osgouei, R.E. (2015) Modified Yield Power-Law fluid flow in narrow annuli with inner rotating pipe. Canadian Journal of Chemical Engineering, 93 (1). pp. 150-165. ISSN 00084034

Bataee, M. and Irawan, S. and Kamyab, M. (2014) Artificial neural network model for prediction of drilling rate of penetration and optimization of parameters. Journal of the Japan Petroleum Institute, 57 (2). pp. 65-70. ISSN 13468804

Tunio, S.Q. and Bhattacharya, S.K. and Memon, K.R. and Irawan, S. and Kyaw, A. and Abdullah, M.F. (2014) Investigating methane adsorption potential of Malaysian coal for coal bed methane (CBM) study. Mediterranean Journal of Social Sciences, 5 (27). pp. 178-183. ISSN 20399340

Shoushtari, M.A. and Irawan, S. and Al Kayiem, A.P.H. and Wen, L.P. and Choong, K.W. (2014) Novel approach for heat transfer characterization in EOR steam injection wells. Research Journal of Applied Sciences, Engineering and Technology, 7 (11). pp. 2345-2352. ISSN 20407459

Ridha, S. and Irawan, S. and Ariwahjoedi, B. (2014) Prediction Equation for Permeability of Class G Oilwell Cement Under Reservoir Conditions. Arabian Journal for Science and Engineering, 39 (6). pp. 5219-5228. ISSN 2193567X

Abbas, G. and Irawan, S. and Memon, K.R. and Kumar, S. and Elrayah, A.A.I. (2013) Hydroxypropylmethyl cellulose as a primary viscosifying agent in cement slurry at high temperature. International Journal of Automotive and Mechanical Engineering, 8 (1). pp. 1218-1225. ISSN 22298649

Abbas, G. and Irawan, S. and Kumar, S. and Elrayah, A.A.I. (2013) Improving oil well cement slurry performance using hydroxypropylmethylcellulose polymer. Advanced Materials Research, 787. pp. 222-227. ISSN 10226680

Nik Ab. Lah., N.K.I.B. and Irawan, S. (2013) Slagment cement improve the cement resistance toward acids attack during acidizing treatment. Research Journal of Applied Sciences, Engineering and Technology, 5 (21). pp. 4961-4966. ISSN 20407459

Ridha, S. and Irawan, S. and Ariwahjoedi, B. (2013) Strength prediction of Class G oilwell cement during early ages by electrical conductivity. Journal of Petroleum Exploration and Production Technology, 3 (4). pp. 303-311. ISSN 21900558

Irawan, S. and Nair, P. and Tunio, S.Q. (2012) Forecasting CBM production of mukah balingian Coalfield, Sarawak, Malaysia. Research Journal of Applied Sciences, Engineering and Technology, 4 (21). pp. 4265-4274. ISSN 20407459

Ridha, S. and Irawan, S. and Ariwahjoedi, B. and Azizli, K.A.B.M. and Nuruddin, M.F. and Khairy, H. (2012) Modified Johnson model for permeability estimation in oil well cement during early hydration. Research Journal of Applied Sciences, Engineering and Technology, 4 (17). pp. 2920-2925. ISSN 20407459

Irawan, S. and Abd Rahman, A.M. and Tunio, S.Q. (2012) Optimization of weight on bit during drilling operation based on rate of penetration model. Research Journal of Applied Sciences, Engineering and Technology, 4 (12). pp. 1690-1695. ISSN 20407459

Tunio, S.Q. and Bhattacharya, S.K. and Irawan, S. (2012) A critical review of methane trapping mechanism to optimize CBM production. Research Journal of Applied Sciences, Engineering and Technology, 4 (23). pp. 5248-5250. ISSN 20407459

Pattinasarany, A. and Irawan, S. (2012) The novel method to estimate effect of cement slurry consistency toward friction pressure in oil/gas well cementing. Research Journal of Applied Sciences, Engineering and Technology, 4 (22). pp. 4596-4606. ISSN 20407459

Irawan, F. and Irawan, S. and Awang, M. (2012) A unique opportunity for liquid carbon dioxide as an enhanced oil recovery method. Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 34 (7). pp. 654-661. ISSN 15567036

Tunio, S.Q. and Tunio, A.H. and Ghirano, N.A. and Irawan, S. (2011) Is it possible to ignore problems rising during vertical drilling? A review. Research Journal of Applied Sciences, Engineering and Technology, 3 (11). pp. 1331-1336. ISSN 20407459

Conference or Workshop Item

Sauki, A. and Khamaruddin, P.N.F.M. and Irawan, S. and Kinif, I. and Ridha, S. (2022) Application of Multiple Regression Technique for Predicting Drilling Rate in Loss Zone. In: UNSPECIFIED.

Tiong, M. and Gholami, R. and Rahman, M.E. and Irawan, S. (2019) An approach to enhance the durability and mechanical properties of Class G cement using nano materials. In: UNSPECIFIED.

Irawan, S. and Kalwar, S.A. and Abbas, G. and Kumar, S. (2018) An innovative solution for preventing gas migration through cement slurry in the lower Indus basin of Pakistan. In: UNSPECIFIED.

Biyanto, T.R. and Matradji and Sawal and Rahman, A.H. and Abdillah, A.I. and Bethiana, T.N. and Irawan, S. (2017) Application of Killer Whale Algorithm in ASP EOR Optimization. In: UNSPECIFIED.

Chai, Y.H. and Yusup, S. and Chok, V.S. and Irawan, S. and Singh, J.D.B.S. and Chin, B.L.F. (2017) Comparison of rheological properties of graphene / carbon nanotube hydrogenated oil based biodegradable drilling fluid. In: UNSPECIFIED.

Hidayat, M.I.P. and Irawan, S. and Abdullah, M.Z. (2017) Effect of casing imperfection on the casing strength in steam injection wells. In: UNSPECIFIED.

Irawan, S. and Permatasari, K.A. and Bayuaji, R. (2017) Effect of density and resistivity measurement for foam flooding propagation in static condition. In: UNSPECIFIED.

Bataee, M. and Hamdi, Z. and Irawan, S. and Ashena, R. and Ghassemi, M.F. (2017) Effect of saturation alteration on wellbore stability during WAG Injection. In: UNSPECIFIED.

Jufar, S.R. and Djuraev, U. and Irawan, S. and Lubis, L.A. (2017) Influence of Saturant on Seismoelectric Coupling Response of Porous Media. In: UNSPECIFIED.

Biyanto, T.R. and Matradji and Irawan, S. and Febrianto, H.Y. and Afdanny, N. and Rahman, A.H. and Gunawan, K.S. and Pratama, J.A.D. and Bethiana, T.N. (2017) Killer Whale Algorithm: An Algorithm Inspired by the Life of Killer Whale. In: UNSPECIFIED.

Irawan, S. and Kinif, B.I. and Bayuaji, R. (2017) Maximizing drilling performance through enhanced solid control system. In: UNSPECIFIED.

Permatasari, K.A. and Reekhi, G.S. and Irawan, S. and Lubis, L.A. (2017) Resistivity wave for monitoring foam flood propagation. In: UNSPECIFIED.

Subekti, S. and Bayuaji, R. and Darmawan, M.S. and Husin, N.A. and Wibowo, B. and Anugraha, B. and Irawan, S. and DIbiantara, D. (2017) Review: Potential strength of fly ash-based geopolymer paste with substitution of local waste materials with higherature effect. In: UNSPECIFIED.

Affandhie, B.A. and Kurniasari, P.T. and Darmawan, M.S. and Subekti, S. and Wibowo, B. and Husin, N.A. and Bayuaji, R. and Irawan, S. (2017) The effects of bottom ash on setting time and compressive strength of fly ash geopolymer paste. In: UNSPECIFIED.

Hidayat, M.I.P. and Irawan, S. and Abdullah, M.Z. (2016) Casing strength degradation in thermal environment of steam injection wells. In: UNSPECIFIED.

Bataee, M. and Irawan, S. and Ridha, S. and Hematpour, H. and Hamdi, Z. (2016) Effects of injection pressure on wellbore stress using flow-stress coupling method. In: UNSPECIFIED.

Omar, M.N.I.B. and Lubis, L.A. and Zanuri, M.N.A. and Ghosh, D.P. and Irawan, S. and Jufar, S.R. (2016) Modelling of Seismic and Resistivity Responses during the Injection of CO2 in Sandstone Reservoir. In: UNSPECIFIED.

Yunita, P. and Irawan, S. and Kania, D. (2016) Optimization of Water-based Drilling Fluid Using Non-ionic and Anionic Surfactant Additives. In: UNSPECIFIED.

Ofei, T.N. and Irawan, S. and Pao, W. (2015) Cuttings-liquid frictional pressure loss model for horizontal narrow annular flow with rotating drillpipe. In: UNSPECIFIED.

Bayuaji, R. and Biyanto, T.R. and Irawan, S. (2015) Design of cement plant waste heat recovery generation. In: UNSPECIFIED.

Irawan, S. and Bharadwaj, A.M. and Temesgen, B. and Karuppanan, S. and Abdullah, M.Z.B. (2015) Effect of wear on the burst strength of l-80 steel casing. In: UNSPECIFIED.

Irawan, S. and Bathaee, M. (2015) Numerical modeling of flow and temperature distribution in heterogeneous wellbore medium. In: UNSPECIFIED.

Biyanto, T.R. and Natawiria, A.D.S. and Kusuma, F. and Musyafa, A. and Noriyati, R.D. and Costa, S.D. and Irawan, S. (2015) The effects of test interval on safety instrumented function (SIF) according to Safety Integrity Level (SIL) value on three phase separator application. In: UNSPECIFIED.

Bazargan, M. and Nakhaee, A. and Koohian, A. and Irawan, S. and Habibpour, M. and Shahvar, M. (2014) Comparison of wellbore stability of UBD in the case of laser drilling and conventional operation. In: UNSPECIFIED.

Abbas, G. and Irawan, S. and Kumar, S. and Kalwar, S.A. (2014) Experimental study of gas migration prevention through cement slurry using hydroxypropy lmethylcellulose. In: UNSPECIFIED.

Nakhaee, A. and Bazargan, M. and Koohian, A. and Habibpour, M. and Irawan, S. and Shahvar, M. (2014) A comparison between the conventional drilling operations and thermal assisted drilling in the case of UBD. In: UNSPECIFIED.

Abbas, G. and Irawan, S. and Kumar, S. and Khan, M.N. and Memon, S. (2013) Gas migration prevention using hydroxypropylmethylcellulose as a multifunctional additive in oil well cement slurry. In: UNSPECIFIED.

Shoushtari, M.A. and Al-Kayiem, H.H. and Irawan, S. and Mohd Saaid, I.B. (2012) Developing novel wellbore heat transfer strategies for HPHT wells. In: UNSPECIFIED.

Ridha, S. and Irawan, S. and Ariwahjoedi, B. (2011) Conductivity dispersion characteristic of cement slurry during early hydration. In: UNSPECIFIED.

Ridha, S. and Irawan, S. and Ariwahjoedi, B. (2011) Microstructure parameter estimation in permeability calculation of well cement during early hydration by a simple particle expansion model. In: UNSPECIFIED.

Ridha, S. and Irawan, S. and Ariwahjoedi, B. (2011) Prediction of interface conductivity of cement slurry during early hydration considering the effect of curing temperature and pressure. In: UNSPECIFIED.

Chen, K.C. and Irawan, S. and Sum, C.W. and Tunio, S.Q. (2011) Preliminary study on gas storage capacity and gas-in-place for CBM potential in Balingian coalfield, Sarawak Malaysia. In: UNSPECIFIED.

Shafian, S.R.M. and Hassan, A.A. and Ismail, S. and Teng, L.K. and Irawan, S. (2010) Blocked isocyanate fluid system for water shut off application. In: UNSPECIFIED.