Article

Ismail, A. and Al�Hapis Abdul Razak, M. and Mustapha, M. and Zaki Abdullah, M. and Hussain, P. and Mohamed Saat, A. and Ayub, F. and Muaz bin Mohd Faisal, M. (2023) Optimisation of Fe-Al Diffusion Bonding in Air. Lecture Notes in Mechanical Engineering. pp. 955-964.

Baharudin, B.A. and Hussain, P. and Mustapha, M. and Ayob, F. and Ismail, A. and Ab Rahman, F. and Khalid, P.Z.M. and Hamid, D.A. and Rojan, M.A. (2020) Tensile Properties of Diffusion Bonded Duplex Stainless Steel to Low Carbon Steel. Lecture Notes in Mechanical Engineering. pp. 333-338. ISSN 21954356

Emamian, S. and Awang, M. and Yusof, F. and Hussain, P. and Meyghani, B. and Zafar, A. (2019) The Effect of Pin Profiles and Process Parameters on Temperature and Tensile Strength in Friction Stir Welding of AL6061 Alloy. Lecture Notes in Mechanical Engineering. pp. 15-37. ISSN 21954356

Ali, S. and Abdul Rani, A.M. and Altaf, K. and Hussain, P. and Prakash, C. and Hastuty, S. and Rao, T.V.V.L.N. and Aliyu, A.�A.A. and Subramaniam, K. (2019) Investigation of alloy composition and sintering parameters on the corrosion resistance and microhardness of 316L stainless steel alloy. Lecture Notes in Mechanical Engineering. pp. 532-541. ISSN 21954356

Puspitasari, W.C. and Ahmad, F. and Ullah, S. and Hussain, P. and Megat-Yusoff, P.S.M. and Masset, P.J. (2019) The study of adhesion between steel substrate, primer, and char of intumescent fire retardant coating. Progress in Organic Coatings, 127. pp. 181-193. ISSN 03009440

Ismail, A. and Hussain, P. and Mustapha, M. and Nuruddin, M.F. and Saat, A.M. and Abdullah, A. and Rahim, A.A.A. and Chevalier, S. (2018) Fe-Al diffusion bonding: Effect of reaction time on the interlayer thickness. Journal of Mechanical Engineering, 5 (Specia). pp. 80-91. ISSN 18235514

Puspitasari, W.C. and Ahmad, F. and Ullah, S. and Rafi Raza, M. and Hussain, P. and Yusoff, P.S.M. and Azmi, Y. (2018) The study of corrosion behaviour of intumescent fire retardant coating with structural steel substrate. International Journal of Electrochemical Science, 13 (10). pp. 9916-9930. ISSN 14523981

Emamian, S. and Hussain, P. and Awang, M. and Arumugam, T. and Yusof, F. and Saheed, M.S.M. and Mohamed, N.M. (2017) Comparison of carbon-based nanomaterials characteristics on H13 tool steel: Vergleich der Eigenschaften Kohlenstoff-basierter Nanomaterialien auf H13 Werkzeugstahl. Materialwissenschaft und Werkstofftechnik, 48 (3). pp. 198-204. ISSN 09335137

Hazwani Dzulkafli, H. and Ahmad, F. and Ullah, S. and Hussain, P. and Mamat, O. and Megat-Yusoff, P.S.M. (2017) Effects of talc on fire retarding, thermal degradation and water resistance of intumescent coating. Applied Clay Science, 146. pp. 350-361. ISSN 01691317

Dan, N. and Hussain, P. and Kakooei, S. (2017) Nitriding of Duplex Stainless Steel for Reduction Corrosion and Wear. Topics in Mining, Metallurgy and Materials Engineering. pp. 225-234. ISSN 23643293

Dan, N.E. and Rashid, N. and Hussain, P. and Mohebbi, H. and Amir, N. (2017) Pearlite transformation from ferrite phase by high temperature gas nitriding of duplex stainless steel. Malaysian Journal of Microscopy, 13 (1). pp. 35-41. ISSN 18237010

Emamian, S. and Awang, M. and Yusof, F. and Hussain, P. and Mehrpouya, M. and Kakooei, S. and Moayedfar, M. and Zafar, A. (2017) A review of friction stir welding pin profile. Lecture Notes in Mechanical Engineering. pp. 1-18. ISSN 21954356

Ibrahim, N.-N.M.D. and Awang, M. and Hussain, P. (2016) Effect of thickness on residual stress in joining sialon to AISI 420. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 4191-4196. ISSN 18196608

Haris, F. and Hussain, P. and Abidin, K.A.Z. (2016) Feasible joining on the reaction layer of diffusion bonded sialon and duplex stainless steel. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14290-14293. ISSN 18196608

Rao, T.V.V.L.N. and Mokhtar, A.A. and Muhammad, M. and Hussain, P. (2016) Optimally tuned active damped dynamic vibration absorber. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13380-13383. ISSN 18196608

Dan, N.E. and Tarmizi Othman, M. and Hussain, P. and Amir, N.B. and Kakooei, S. (2016) Quenching and heat treatment of welded duplex stainless steel to avoid intergranular corrosion. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13405-13409. ISSN 18196608

Ibrahim, N.N.M. and Hussain, P. and Awang, M. (2014) Effect of nitriding on reaction layer of diffusion bonded sialon to AISI 420 martensitic stainless steel. Applied Mechanics and Materials, 660. pp. 178-184. ISSN 16609336

Ibrahim, N.N.M. and Hussain, P. and Awang, M. (2014) Microstructure and hardness of diffusion bonded sialon-AISI 420 martensitic stainless steel. Advanced Materials Research, 974. pp. 199-204. ISSN 10226680

Triwiyanto, A. and Hussain, P. and Ismail, M.C. (2014) Nanoindentation and microstructure of hybrid treated of AISI 316L at low temperature. International Journal of Materials Engineering Innovation, 5 (1). pp. 38-47. ISSN 17572754

Hussain, P. and Bhagat, R. and Dashwood, R. (2013) Precursor preparation for Ti-Al-V-Y alloy via FFC cambridge process. Applied Mechanics and Materials, 330. pp. 62-67. ISSN 16609336

Triwiyanto, A. and Hussain, P. and Rahman, A. and Ismail, M.C. (2013) The influence of nitriding time of AISI 316l stainless steel on microstructure and tribological properties. Asian Journal of Scientific Research, 6 (2). pp. 323-330. ISSN 19921454

Triwiyanto, A. and Hussain, P. and Ismail, M.C. (2012) Behavior of carbon and nitrogen after low temperature thermochemical treatment on austenitic and Duplex stainless steel. Applied Mechanics and Materials, 110-11. pp. 621-626. ISSN 16609336

Zaharuddin, W.A.W. and Ariwahjoedi, B. and Hussain, P. (2011) Effect of vermiculite addition on thermal characteristic of water-based acrylic fire retardant coating formulation. Journal of Applied Sciences, 11 (10). pp. 1763-1769. ISSN 18125654

Mustapha, M. and Mustapha, F. and Mamat, O. and Hussain, P. (2011) Fabrication of aluminium foam through pressure assisted high frequency induction heated sintering dissolution process: An experimental observation. Powder Metallurgy, 54 (3). pp. 343-353. ISSN 00325899

Dzulkafli, H.H. and Hussain, P. and Mamat, O. and Ahmad, F. (2011) Preparation and characterization of intumescent coating using talc Mg 3SiO 4O 10(OH 2) as a filler. Malaysian Journal of Microscopy, 7 (1). pp. 58-64. ISSN 18237010

Firmanto, H. and Hussain, P. and Mamat, O. (2011) Reaction layers of the diffusion-bonded sialon and high-chromium steel. Journal of Applied Sciences, 11 (10). pp. 1809-1814. ISSN 18125654

Hassan, C.S. and Hussain, P. and Awang, M. (2011) Stress analysis on direct joining of Sialon to AISI 430 ferritic stainless steel. Journal of Applied Sciences, 11 (10). pp. 1803-1808. ISSN 18125654

Triwiyanto, A. and Haruman, E. and Sudin, M.B. and Mridha, S. and Hussain, P. (2011) Structural and properties development of expanded austenite layers on AISI316L after low temperature thermochemical treatments. Journal of Applied Sciences, 11 (9). pp. 1536-1543. ISSN 18125654

Mustapha, F. and Mustapha, M. and Noorsal, K. and Mamat, O. and Hussain, P. and Ahmad, F. and Muhamad, N. and Haris, S.M. (2010) Preliminary study on the fabrication of aluminium foam through pressure assisted sintering dissolution process. Journal of Materials Processing Technology, 210 (12). pp. 1598-1612. ISSN 09240136

Firmanto, H. and Hussain, P. and Mamat, O. (2010) Suppression of iron silicide formation in the reaction layer of sialon-7.5 Cr ferritic steel joint. Defect and Diffusion Forum, 312-31. pp. 889-893. ISSN 10120386

Conference or Workshop Item

Hussain, P. and Mahmoud, H. and Basha, S.N. and Mohamad, A.I. (2020) Correlation between microstructure and micro-hardness of 316L nitrided austenitic stainless steel. In: UNSPECIFIED.

Abdullah, M.Z.B. and Abdullah, A.N.B. and Othman, M.H.B. and Ahmad, M.A.B. and Hussain, P. (2019) Pin-on-disc tribotest of Cr/CrN/CrCN/ZrN multilayer coatings by physical vapour deposition (PVD). In: UNSPECIFIED.

Ayob, F. and Hussain, P. and Awang, M. and Zoolfakar, M.R. and Abdullah, A. and Baharudin, B.A. and Abdul Rahim, A.A. (2018) Effect of post heat treatment on the microstructure and microhardness of diffusion coupled gray cast iron and low carbon steel. In: UNSPECIFIED.

Dan, N.E. and Mohd Sabri, S.N.S. and Hussain, P. and Mohebbi, H. (2018) The Influence of Nitrogen on the Wear Resistance of Ferritic Stainless Steel. In: UNSPECIFIED.

Dan, N.E. and Mahmud, M.S. and Hussain, P. and Mohebbi, H. and Kakooei, S. (2018) Physical and mechanical properties of heat affected zone of dissimilar welds between duplex stainless steel and low carbon steel. In: UNSPECIFIED.

Abdullah, M.Z.B. and Ahmad, M.A. and Abdullah, A.N. and Othman, M.H. and Hussain, P. and Zainuddin, A. (2016) Metal Release of Multilayer Coatings by Physical Vapour Deposition (PVD). In: UNSPECIFIED.

Ibrahim, N.N.M. and Hussain, P. and Awang, M. (2015) Morphology, topography, and hardness of diffusion bonded sialon to AISI 420 at different bonding time. In: UNSPECIFIED.

Triwiyanto, A. and Hussain, P. and Priadi, D. and Ismail, M.C. (2015) Surface characteristics of low temperature hybrid thermochemical treatment of AISI 316L. In: UNSPECIFIED.

Mahmoud, H.R.S. and Yusoff, S.A. and Zainuddin, A. and Hussain, P. and Ismail, M. and Abidin, K. (2014) Effective duration of gas nitriding process on AISI 316L for the formation of a desired thickness of surface nitrided layer. In: UNSPECIFIED.

Abidin, K.A.Z. and Ismail, E.A. and Zainuddin, A. and Hussain, P. (2014) Investigation of microstructure and corrosion propagation behaviour of nitrided martensitic stainless steel plates. In: UNSPECIFIED.

Triwiyanto, A. and Zainuddin, A. and Abidin, K.A.Z. and Billah, M.A. and Hussain, P. (2014) Mathematical modelling of nitride layer growth of low temperature gas and plasma nitriding of AISI 316L. In: UNSPECIFIED.

Ibrahim, N.N.M. and Hussain, P. and Awang, M. (2014) Microstructure and hardness of high temperature gas nitrided aisi 420 martensitic stainless steel. In: UNSPECIFIED.

Triwiyanto, A. and Hussain, P. and Ismail, M.C. (2013) Microstructure and nanoindentation characterization of low temperature hybrid treated layer on austenitic stainless steel. In: UNSPECIFIED.

Triwiyanto, A. and Hussain, P. and Ismail, M.C. (2011) Elemental analysis of treated layers on stainless steel after low temperature hybrid thermochemical treatments. In: UNSPECIFIED.

Zaharuddin, W.A.W. and Ariwahjoedi, B. and Hussain, P. (2010) Effect of vermiculite on fire protectiveness of waterbased acrylic fire retardant coating. In: UNSPECIFIED.

Hussain, P. and Mamat, O. and Mohammad, M. and Jaafar, W.M.N.W. (2010) Formation of nitrogen-pearlite in the diffusion bonding of sialon to 316L stainless steel. In: UNSPECIFIED.