Article

Raza, A. and Altaf, K. and Ahmad, F. and Hussain, G. and Alkahtani, M. and wei, Hongyu (2024) Experimental study and characterisation of 316L stainless steel parts fabricated with metal fused filament fabrication. Journal of Materials Research and Technology, 30. pp. 6686-6698.

Ahmed, S.W. and Altaf, K. and Tariq, A. and Alkahtani, M. and Buhl, J. and Hussain, G. (2024) Geometric Optimization of SLM-Printed AlSi10Mg Radial Heat Sinks: A Numerical and Experimental Approach for Natural Convection Conditions. Arabian Journal for Science and Engineering.

Ahmed, S.W. and Tariq, A. and Altaf, K. and Ali, S. and Hussain, G. and Baharom, M.B. (2024) Thermal Analysis of Helical Pin Fins at Different Pitch Steps Through Numerical Technique. Lecture Notes in Mechanical Engineering. pp. 71-83. ISSN 21954356

Tariq, A. and Ahmed, S.W. and Bin Baharom, M. and Altaf, K. and Hussain, G. and Jamil, A. and Mohammed, S.E. and Ali, H.M. (2024) An investigation of thermal and hydrodynamic behaviour of compound fins under turbulent flow conditions: A numerical and experimental approach. Alexandria Engineering Journal, 89. pp. 149-171.

Ahmad, A. and Abbas, A. and Hussain, G. and Al-Abbasi, O. and Alkahtani, M. and Altaf, K. (2023) Performance evaluation of 3D printed polymer heat exchangers: influence of printing temperature, printing speed and wall thickness with consideration of surface roughness. International Journal of Advanced Manufacturing Technology, 128 (7-8). pp. 3627-3647.

Qayyum, H. and Hussain, G. and Sulaiman, M. and Hassan, M. and Ali, A. and Muhammad, R. and Wei, H. and Shehbaz, T. and Aamir, M. and Altaf, K. (2022) Effect of Raster Angle and Infill Pattern on the In-Plane and Edgewise Flexural Properties of Fused Filament Fabricated Acrylonitrile�Butadiene�Styrene. Applied Sciences (Switzerland), 12 (24). ISSN 20763417

Altaf, K. and Tariq, A. and Ahmad, S.W. and Hussain, G. and Ratlamwala, T.A.H. and Ali, H.M. (2022) Thermal and hydraulic analysis of slotted plate fins heat sinks using numerical and experimental techniques. Case Studies in Thermal Engineering, 35. ISSN 2214157X

Tariq, A. and Altaf, K. and Ahmad, S.W. and Hussain, G. and Ratlamwala, T.A.H. (2021) Comparative numerical and experimental analysis of thermal and hydraulic performance of improved plate fin heat sinks. Applied Thermal Engineering, 182. ISSN 13594311

Zahid Gill, E. and Abdul Hussain Ratlamwala, T. and Waseem, S. and Hussain, G. and Alkahtani, M. and Altaf, K. (2021) Life Cycle Assessment and Feasibility Study of Solar Based Multi- Generation System. Sustainable Energy Technologies and Assessments, 47. ISSN 22131388

Ahmed, S.W. and Hussain, G. and Al-Ghamdi, K.A. and Altaf, K. (2021) Mechanical properties of an additive manufactured CF-PLA/ABS hybrid composite sheet. Journal of Thermoplastic Composite Materials, 34 (11). pp. 1577-1596. ISSN 08927057

Tariq, A. and Altaf, K. and Hussain, G. and Reezwan, M. (2021) Plate fin heat sink for the application in solar thermal power. Green Energy and Technology. pp. 115-131. ISSN 18653529

Ali, S. and Abdul Rani, A.M. and Baig, Z. and Ahmed, S.W. and Hussain, G. and Subramaniam, K. and Hastuty, S. and Rao, T.V.V.L.N. (2020) Biocompatibility and corrosion resistance of metallic biomaterials. Corrosion Reviews, 38 (5). pp. 381-402. ISSN 03346005

Ahmed, S.W. and Hussain, G. and Altaf, K. and Ali, S. and Alkahtani, M. and Abidi, M.H. and Alzabidi, A. (2020) On the effects of process parameters and optimization of interlaminate bond strength in 3D printed ABS/CF-PLA composite. Polymers, 12 (9). ISSN 20734360

Wei, H. and Latif, A. and Hussain, G. and Heidarshenas, B. and Altaf, K. (2019) Influence of tool material, tool geometry, process parameters, stacking sequence, and heat sink on producing sound Al/cu lap joints through friction stir welding. Metals, 9 (8). ISSN 20754701

Hussain, G. and Khan, F.U. and Khan, I.U. and Muhammad, N. and Jan, S. and Aziz, T. and Tariq, M. and Hussain, A. and Asimullah, A. and Bilal, H. and Shahidullah, S. and Abdullah, A. and Khan, S.U. and Ud Din, S. (2014) Chemical parameters and microbial analysis of potable water of various tehsils in North Waziristan agency. World Applied Sciences Journal, 32 (6). pp. 1053-1056. ISSN 18184952

Book

Ahmed, S.W. and Altai, K. and Hussain, G. and Qayyum, J. and Tariq, A. (2023) Additive manufacturing based rapid tooling. CRC Press, pp. 115-136. ISBN 9781003220985; 9781032116693