Items where Author is "Hashim, F.M."
Article
Gebremedhen, H.S. and Woldemichael, D.E. and Hashim, F.M. and Altaf, K. and Chong, H.C. (2023) Effect of Filtering Techniques in Manufacturing of Optimal Topologies Using Additive Manufacturing. Green Energy and Technology. pp. 167-177. ISSN 18653529
Abbasi, A. and Hashim, F.M. and Machmudah, A. (2022) Modeling of hydrate formation prediction in binary components of natural gas. Petroleum Science and Technology, 40 (16). pp. 2025-2037. ISSN 10916466
Abbasi, A. and Soomro, A.A. and Hashim, F.M. (2022) PREDICTION OF THE THERMODYNAMIC HYDRATE FORMATION CONDITIONS FOR METHANE GAS. ARPN Journal of Engineering and Applied Sciences, 17 (2). pp. 160-165. ISSN 18196608
Abbasi, A. and Hashim, F.M. (2022) A review on fundamental principles of a natural gas hydrate formation prediction. Petroleum Science and Technology, 40 (19). pp. 2382-2404. ISSN 10916466
Rao, T.V.V.L.N. and Rani, A.M.A. and Mohamed, N.M. and Ya, H.H. and Awang, M. and Hashim, F.M. (2021) Stability Analysis of Partial Slip Texture Journal Bearing. Lecture Notes in Mechanical Engineering. pp. 217-225. ISSN 21954356
Memon, Z.Q. and Pao, W. and Hashim, F.M. and Ali, H.M. (2020) Experimental investigation of two-phase separation in T-Junction with combined diameter ratio. Journal of Natural Gas Science and Engineering, 73. ISSN 18755100
Abbasi, A. and Hashim, F.M. (2020) Hydrate formation prediction model for binary gases of methane + ethane and methane + propane by using optimization algorithm. Petroleum Science and Technology, 38 (1). pp. 36-42. ISSN 10916466
Gebremedhen, H.S. and Woldemichael, D.E. and Hashim, F.M. (2020) A firefly algorithm based hybrid method for structural topology optimization. Advanced Modeling and Simulation in Engineering Sciences, 7 (1). ISSN 22137467
Rao, T.V.V.L.N. and Rani, A.M.A. and Mohamed, N.M. and Ya, H.H. and Awang, M. and Hashim, F.M. (2019) Analysis of magnetohydrodynamic partial slip laser bump texture slider and journal bearing. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 233 (12). pp. 1921-1938. ISSN 13506501
Abbasi, A. and Hashim, F.M. (2019) Evaluating Pressure in Deepwater Gas Pipeline for the Prediction of Natural Gas Hydrate Formation. Engineering, Technology and Applied Science Research, 9 (6). pp. 5033-5036. ISSN 22414487
Al-Kayiem, H.H. and Osei, H. and Hashim, F.M. and Hamza, J.E. (2019) Flow structures and their impact on single and dual inlets hydrocyclone performance for oil�water separation. Journal of Petroleum Exploration and Production Technology, 9 (4). pp. 2943-2952. ISSN 21900558
Gebremedhen, H.S. and Woldemicahel, D.E. and Hashim, F.M. (2019) Three-dimensional stress-based topology optimization using SIMP method. International Journal for Simulation and Multidisciplinary Design Optimization, 10. ISSN 17796288
Osman, A.B. and Ovinis, M. and Hashim, F.M. and Faye, I. (2019) Wavelet-based optical velocimetry for oil spill flow rate estimation. Measurement: Journal of the International Measurement Confederation, 138. pp. 485-496. ISSN 02632241
Saieed, A. and Pao, W. and Hashim, F.M. (2018) Effect of T-junction diameter ratio on stratified-wavy flow separation. Journal of Natural Gas Science and Engineering, 51. pp. 223-232. ISSN 18755100
Osman, A.B. and Ovinis, M. and Faye, I. and Hashim, F.M. (2018) Image-Based Technique for Turbulent Flow Segmentation. Lecture Notes in Electrical Engineering, 488. pp. 119-129. ISSN 18761100
Osman, A.B. and Ovinis, M. and Faye, I. and Hashim, F.M. and Osei, H. (2018) An optical flow measurement technique based on continuous wavelet transform. Journal of Applied Fluid Mechanics, 11 (3). pp. 695-707. ISSN 17353572
Abbasi, A. and Hashim, F.M. (2017) Development of a hydrate formation prediction model for sub-sea pipeline. Petroleum Science and Technology, 35 (5). pp. 443-450. ISSN 10916466
Pedapati, S.R. and Sidiq, A.B. and Awang, M. and Hashim, F.M. and Jebaraj, S. (2017) Effect of bevel angles on tensile strength of SS304 steel weld joints. Lecture Notes in Mechanical Engineering. pp. 95-106. ISSN 21954356
Pao, W. and Saieed, A. and Hashim, F.M. and Norpiah, R.B.M. (2017) Numerical simulation of two�phase separation in a small diameter ratio T-junction: Numerische Simulation der Zweiphasentrennung in einem T-Knoten mit kleinem Durchmesser. Materialwissenschaft und Werkstofftechnik, 48 (3). pp. 255-260. ISSN 09335137
Rao, T.V.V.L.N. and Rani, A.M.A. and Awang, M. and Hashim, F.M. (2017) Stability evaluation of three-layered journal bearing with slip/partial slip. Industrial Lubrication and Tribology, 69 (3). pp. 334-341. ISSN 00368792
Osman, A.B. and Ovinis, M. and Hashim, F.M. and Mohammed, K. and Osei, H. (2017) Time delay estimation using continuous wavelet transform coefficients. Advanced Science Letters, 23 (2). pp. 1299-1303. ISSN 19366612
Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2016) Analysis of Micropolar and Power Law Fluid�Lubricated Slider and Journal Bearing with Partial Slip�Partial Slip Texture Configuration. Tribology Transactions, 59 (5). pp. 896-910. ISSN 10402004
Javaid, M.Y. and Ovinis, M. and Hashim, F.M. and Maimun, A. and Ahmed, Y.M. and Ullah, B. (2016) Effect of water current on underwater glider velocity and range. Jurnal Teknologi, 78 (10-4). pp. 47-53. ISSN 01279696
Hashim, F.M. and Abbasi, A. (2016) Empirical modeling of hydrate formation prediction in deepwater pipelines. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12212-12216. ISSN 18196608
Rao, T.V.V.L.N. and Rani, A.M.A. and Awang, M. and Hashim, F.M. (2016) Load capacity coefficient evaluation of three-layered journal bearing with slip. Jurnal Teknologi, 78 (6-10). pp. 39-43. ISSN 01279696
Saieed, A. and Sam, B. and Pao, W. and Hashim, F.M. (2016) Numerical investigation of side arm gas volume fraction in two phase T-junction. Journal of Mechanical Engineering and Sciences, 10 (3). pp. 2311-2323. ISSN 22894659
Shobowale, K.O. and Hashim, F.M. and Hussin, H. (2016) Ontology based decision support knowledge acquisition module. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 11988-11993. ISSN 18196608
Lemma, T.A. and Hashim, F.M. and Majid, M.A.B.A. (2016) Short-term and multi-state reliability model for an industrial gas turbine. ARPN Journal of Engineering and Applied Sciences, 11 (14). pp. 8715-8720. ISSN 18196608
Rao, T.V.V.L.N. and Rani, A.M.A. and Awang, M. and Nagarajan, T. and Hashim, F.M. (2016) Stability analysis of double porous and surface porous layer journal bearing. Tribology - Materials, Surfaces and Interfaces, 10 (1). pp. 19-25. ISSN 17515831
Gebremedhen, H.S. and Woldemichael, D.E. and Hashim, F.M. (2016) Structural topology optimization subjected to relaxed stress and design variables. ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6490-6495. ISSN 18196608
Lemma, T.A. and Hashim, F.M. and Abd Majid, M.A.B. (2016) An integrated approach to industrial gas turbine diagnostics and reliability montoring. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7799-7805. ISSN 18196608
Abbasi, A. and Hashim, F.M. (2016) An intelligent optimization�based prediction model for natural gas hydrate formation in a deepwater pipeline. Petroleum Science and Technology, 34 (15). pp. 1352-1358. ISSN 10916466
Gebremedhen, H.S. and Woldemichael, D.E. and Hashim, F.M. (2016) A literature survey on challenges in stress based topology optimization. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14188-14194. ISSN 18196608
Abbasi, A. and Hashim, F.M. (2016) A prediction model for the natural gas hydrate formation pressure into transmission line. Petroleum Science and Technology, 34 (9). pp. 824-831. ISSN 10916466
Osman, A.B. and Ovinis, M. and Osei, H. and Hashim, F.M. (2016) A review of optical flow models applied for fluid motion estimation. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12181-12186. ISSN 18196608
Saieed, A. and Sam, B. and Pao, W. and Hashim, F.M. and Norpiah, R.B.M. (2016) A review of t-junction geometrical effect on two-phase separation. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14233-14238. ISSN 18196608
Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2014) Analysis of couple stress fluid lubricated partially textured slip slider and journal bearing using narrow groove theory. Tribology International, 69. pp. 1-9. ISSN 0301679X
Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2014) Analysis of two-layered film journal bearing with partial slip surface. Advanced Materials Research, 903. pp. 215-220. ISSN 10226680
Shobowale, K.O. and Hashim, F.M. (2014) Current trend in the oil and gas industry on subsea processing equipment. Applied Mechanics and Materials, 465-46. pp. 1357-1360. ISSN 16609336
Pao, W. and Hashim, F.M. (2014) Numerical coupling of drilling vibration to riser's oscillation. Applied Mechanics and Materials, 548-54. pp. 1893-1897. ISSN 16609336
Hashim, F.M. and Ahmad, M.F.A. (2014) Numerical simulation of supersonic subsea compact wet gas separator for gas transmission pipeline. Applied Mechanics and Materials, 607. pp. 298-302. ISSN 16609336
Liew, M.S. and Zawawi, N.A.W.A. and Hashim, F.M. (2014) Raising the skills bar for deep water. Marine Technology, 51 (2). pp. 82-84. ISSN 00253316
Haniffa, M.A.M. and Hashim, F.M. (2014) Recent developments in contra-flow crawler in pipeline. Applied Mechanics and Materials, 465-46. pp. 784-788. ISSN 16609336
Al Batati, N. and Hashim, F.M. and Pao, W. (2014) Simulation of drill pipe lateral vibration due to riser's oscillation. Advanced Materials Research, 845. pp. 168-172. ISSN 10226680
Al-Batati, N. and Hashim, F.M. and Pao, K.S. (2014) Simulation of drill string vibration inside well bore due to Riser's Oscillation. Research Journal of Applied Sciences, Engineering and Technology, 7 (1). pp. 174-182. ISSN 20407459
Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2013) Analysis of Journal Bearing with Double-Layer Porous Lubricant Film: Influence of Surface Porous Layer Configuration. Tribology Transactions, 56 (5). pp. 841-847. ISSN 10402004
Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2013) Analysis of journal bearing considering the effects of surface layer and couple stress fluids. Asian Journal of Scientific Research, 6 (2). pp. 315-322. ISSN 19921454
Tamiru, A.L. and Hashim, F.M. (2013) Application of bat algorithm and fuzzy systems to model exergy changes in a gas turbine. Studies in Computational Intelligence, 427. pp. 685-719. ISSN 1860949X
Osman Abdalla, M. and Nagarajan, T. and Hashim, F.M. (2013) Energy saving in the hydraulic cylinders by using novel self-actuated flow control valve (SAFCV). International Review of Mechanical Engineering, 7 (3). pp. 487-494. ISSN 19708734
Yong, L.H.P. and Pao, W.K.S. and Hashim, F.M. (2013) Fill removal in wellbore using coiled tubing. Applied Mechanics and Materials, 393. pp. 863-871. ISSN 16609336
Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2013) Load capacity of partially textured journal bearing with trapezoidal recess. Applied Mechanics and Materials, 315. pp. 830-834. ISSN 16609336
Hussin, H. and Hashim, F.M. and Ramli, O.H. and Ghazali, S.M.A. (2013) Maintainability analysis of an offshore gas compression train system, a case study. International Journal of Quality and Reliability Management, 30 (5). pp. 495-510. ISSN 0265671X
Arnirtham, V. and Nagarajan, T. and Krishnan, S. and Hashim, F.M. (2013) SMA Actuation for wrist motion with split-tube flexures. Asian Journal of Scientific Research, 6 (3). pp. 615-620. ISSN 19921454
Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2012) Analysis of slider and journal bearing using partially textured slip surface. Tribology International, 56. pp. 121-128. ISSN 0301679X
Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2012) Analysis of two-layered porous journal bearing using the Brinkman model. Journal of Applied Sciences, 12 (24). pp. 2610-2615. ISSN 18125654
Abdalla, M.O. and Nagarajan, T. and Hashim, F.M. (2012) Improvement of actuation speed of hydraulic cylinders: Using novel flow control valve system. Communications in Computer and Information Science, 330 CC. pp. 331-339. ISSN 18650929
Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2012) Partially textured slider and journal bearing analysis. Jurnal Teknologi (Sciences and Engineering), 58 (SUPPL.). pp. 77-84. ISSN 01279696
Hussin, H. and Hashim, F.M. and Mokhtar, A.A. (2012) Systematic approach to maintainability analysis at operational phase. Journal of Applied Sciences, 12 (24). pp. 2562-2567. ISSN 18125654
Tamiru, A.L. and Hashim, F.M. and Rangkuti, C. (2011) Generating gas turbine component maps relying on partially known overall system characteristics. Journal of Applied Sciences, 11 (11). pp. 1885-1894. ISSN 18125654
Hussin, H. and Hashim, F.M. (2011) Modeling of maintenance downtime distribution using expert opinion. Journal of Applied Sciences, 11 (9). pp. 1573-1579. ISSN 18125654
Roslan, A.M.B.S. and Amirtham, V. and Nagarajan, T. and Hashim, F.M. (2011) SMA actuator technology application in Stewart Platform construction. Journal of Applied Sciences, 11 (23). pp. 3783-3790. ISSN 18125654
Woldemichael, D.E. and Hashim, F.M. and Debnath, S. (2011) A knowledge-based conceptual design support system. Advanced Materials Research, 308-31. pp. 1540-1545. ISSN 10226680
Woldemichael, D.E. and Hashim, F.M. (2009) Development of conceptual design support tool for subsea process equipment design. International Journal of Mechanical and Mechatronics Engineering, 9 (10). pp. 12-17. ISSN 22272771
Conference or Workshop Item
Wong, E.W.C. and Choi, H.S. and Kim, D.K. and Hashim, F.M. (2018) Development of ANN Model for the Prediction of VIV Fatigue Damage of Top-tensioned Riser. In: UNSPECIFIED.
Tran, M. and Memon, Z. and Pao, W. and Hashim, F.M. (2018) Preliminary Results of Numerical Simulation of Slug Flow in a Regular T-Junction. In: UNSPECIFIED.
Memon, Z.Q. and Tran, C.M. and Pao, W. and Hashim, F.M. (2018) Two-phase slug flow separation at T-junction with regular and reduced vertical side arm. In: UNSPECIFIED.
Saieed, A. and Pao, W. and Hashim, F.M. and Norpiah, R.B.M. (2017) Numerical study of gas-liquid flow maldistribution in a T-junction having very small diameter ratio. In: UNSPECIFIED.
Lemma, T.A. and Hashim, F.M. and Abd Majid, M.A.B. (2016) Exergy based multi-state reliability model for a stationary gas turbine. In: UNSPECIFIED.
Lemma, T.A. and Hashim, F.M. and Abd Majid, M.A.B. (2016) Gas turbine prognostics using fuzzy systems and modified bat algorithm. In: UNSPECIFIED.
Woldemichael, D.E. and Hashim, F.M. and Ovinis, M. and Lee, W.C. and Bin Mohd Halim, M.H. (2016) Modelling and Simulation of Free Floating Pig for Different Pipeline Inclination Angles. In: UNSPECIFIED.
Abbasi, A. and Hashim, F.M. (2016) Prediction of hydrate formation conditions in subsea pipeline with genetic algorithm. In: UNSPECIFIED.
Pao, W. and Hashim, F.M. and Ming, L.H. (2015) Numerical investigation of gas separation in T-junction. In: UNSPECIFIED.
Osei, H. and Al-Kayiem, H.H. and Hashim, F.M. (2015) Numerical studies on the separation performance of liquid-liquid hydrocyclone for higher water-cut wells. In: UNSPECIFIED.
Woldemichael, D.E. and Hashim, F.M. (2015) Web-based conceptual design support system. In: UNSPECIFIED.
Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2014) Analysis of two-layered journal bearing lubricated with ferrofluid. In: UNSPECIFIED.
Pao, W. and Hashim, F.M. and Ming, L.H. (2014) Computational analyses of passive wet gas separation in branched piping. In: UNSPECIFIED.
Oluwatoyin, S.K. and Hashim, F.M. and Hussin, H.B. (2014) Failure mode and effect analysis of subsea multiphase pump equipment. In: UNSPECIFIED.
Pao, W. and Hashim, F.M. and Parman, S. (2014) Modeling of axial spring stiffness in active vibration controlled drilling. In: UNSPECIFIED.
Omer, M.A. and Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2014) Pressure distribution in hydrodynamic journal bearing with lubricants additives. In: UNSPECIFIED.
Woldemichael, D.E. and Hashim, F.M. (2014) Progressive concept evaluation method for automatically generated concept variants. In: UNSPECIFIED.
Al-Kayiem, H.H. and Osei, H. and Yin, K.Y. and Hashim, F.M. (2014) A comparative study on the hydrodynamics of liquid�liquid hydrocyclonic separation. In: UNSPECIFIED.
Abbasi, A. and Hashim, F.M. (2014) A review on the application of empirical models to hydrate formation prediction. In: UNSPECIFIED.
Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2013) Analysis of couple stress fluid lubricated journal bearing with partial slip surface. In: UNSPECIFIED.
Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2013) Load capacity of partially textured slip parallel slider and concentric journal bearing using narrow groove theory. In: UNSPECIFIED.
Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2012) Analysis of partially textured slider and journal bearing. In: UNSPECIFIED.
Lemma, T.A. and Hashim, F.M. (2012) Wavelet analysis and auto-associative neural network based fault detection and diagnosis in an industrial gas turbine. In: UNSPECIFIED.
Haniffa, M.A.M. and Hashim, F.M. (2011) Recent developments in in-line inspection tools (ILI) for deepwater pipeline applications. In: UNSPECIFIED.
Haniffa, M.A.Md. and Hashim, F.M. (2011) Review of hydrate prevention methods for deepwater pipelines. In: UNSPECIFIED.
Hussin, H. and Muhammad, M. and Hashim, F.M. and Ibrahim, S.N. (2010) A practical method for analyzing offshore gas compressor system maintenance data. In: UNSPECIFIED.
Hussin, H. and Hashim, F.M. and Muhammad, M. and Ibrahim, S.N. (2010) A systematic and practical approach of analyzing offshore system maintenance data. In: UNSPECIFIED.
Tamiru, A.L. and Rangkuti, C. and Hashim, F.M. (2009) Neuro-fuzzy and PSO based model for the steam and cooling sections of a Cogeneration and Cooling Plant (CCP). In: UNSPECIFIED.
Ahmad, F. and Hashim, F.M. and Mamat, O. (2005) Fiber breakage in processing powder injection molded metal matrix composites. In: UNSPECIFIED.