Alaloul, W.S. and Musarat, M.A. and Haruna, S. and Tayeh, B.A. and Norizan, M.N.B. (2022) Chemical attack on concrete containing a high volume of crumb rubber as a partial replacement for fine aggregate in engineered cementitious composite (ECC). Canadian Journal of Civil Engineering, 49 (1). pp. 11-17. ISSN 03151468

Ali, M. and Abbas, S. and Salah, B. and Akhter, J. and Saleem, W. and Haruna, S. and Room, S. and Abdulkadir, I. (2021) Article investigating optimal confinement behaviour of low-strength concrete through quantitative and analytical approaches. Materials, 14 (16). ISSN 19961944

Mohammed, B.S. and Xian, L.W. and Haruna, S. and Liew, M.S. and Abdulkadir, I. and Zawawi, N.A.W.A. (2021) Deformation Properties of Rubberized Engineered Cementitious Composites Using Response Surface Methodology. Iranian Journal of Science and Technology - Transactions of Civil Engineering, 45 (2). pp. 729-740. ISSN 22286160

Usman Kankia, M. and Baloo, L. and Mohammed, B.S. and Hassan, S.B. and Haruna, S. and Danlami, N. and Affiana Ishak, E. and Nurliyana Samahani, W. (2021) Effects of petroleum sludge ash in fly ash-based geopolymer mortar. Construction and Building Materials, 272. ISSN 09500618

Liew, M.S. and Mohammed, B.S. and Danyaro, K.U. and Al-Yacouby, A.M. and Haruna, S. (2021) Effects of quartz powder on the compressive strength of high performance engineered cementitious composites. Lecture Notes in Civil Engineering, 132. pp. 677-684. ISSN 23662557

Haruna, S. and Mohammed, B.S. and Wahab, M.M.A. and Kankia, M.U. and Amran, M. and Gora, A.M. (2021) Long-term strength development of fly ash-based one-part alkali-activated binders. Materials, 14 (15). ISSN 19961944

Alaloul, W.S. and Musarat, M.A. and Haruna, S. and Law, K. and Tayeh, B.A. and Rafiq, W. and Ayub, S. (2021) Mechanical properties of silica fume modified high-volume fly ash rubberized self-compacting concrete. Sustainability (Switzerland), 13 (10). ISSN 20711050

Kankia, M.U. and Baloo, L. and Danlami, N. and Samahani, W.N. and Mohammed, B.S. and Haruna, S. and Jagaba, A.H. and Abubakar, M. and Ishak, E.A. and Sayed, K. and Zawawi, N.A.B.W. (2021) Optimization of cement-based mortar containing oily sludge ash by response surface methodology. Materials, 14 (21). ISSN 19961944

Kankia, M.U. and Baloo, L. and Danlami, N. and Mohammed, B.S. and Haruna, S. and Abubakar, M. and Jagaba, A.H. and Sayed, K. and Abdulkadir, I. and Salihi, I.U. (2021) Performance of fly ash-based inorganic polymer mortar with petroleum sludge ash. Polymers, 13 (23). ISSN 20734360

Amran, M. and Murali, G. and Khalid, N.H.A. and Fediuk, R. and Ozbakkaloglu, T. and Lee, Y.H. and Haruna, S. and Lee, Y.Y. (2021) Slag uses in making an ecofriendly and sustainable concrete: A review. Construction and Building Materials, 272. ISSN 09500618

Al-Fakih, A. and Mohammed, B.S. and Liew, M.S. and Wahab, M.W.A. and Haruna, S. (2021) Utilizing of crumb rubber derived recycled scrap tires in masonry application: A review. Materials Science Forum, 1030 M. pp. 73-87. ISSN 02555476

Haruna, S. and Mohammed, B.S. and Wahab, M.M.A. and Haruna, A. (2020) Compressive strength and workability of high calcium one-part alkali activated mortars using response surface methodology. In: UNSPECIFIED.

Haruna, A. and Shafiq, N. and Ali, M.O. and Mohammed, M. and Haruna, S. (2020) Design and construction technique for low embodied energy building: An analytical network process approach. Journal of Engineering and Technological Sciences, 52 (2). pp. 166-180. ISSN 23375779

Haruna, A. and Shafiq, N. and Montasir, O.A. and Haruna, S. and Mohammed, M. (2020) Design, Material Selection and Manufacturing for Sustainable Construction: An Analytical Network Process Approach. In: UNSPECIFIED.

Mohammed, B.S. and Yen, L.Y. and Haruna, S. and Seng Huat, M.L. and Abdulkadir, I. and Al-Fakih, A. and Liew, M.S. and Abdullah Zawawi, N.A.W. (2020) Effect of elevated temperature on the compressive strength and durability properties of crumb rubber engineered cementitious composite. Materials, 13 (16). ISSN 19961944

Haruna, S. and Mohammed, B.S. and Wahab, M.M.A. and Liew, M.S. (2020) Effect of paste aggregate ratio and curing methods on the performance of one-part alkali-activated concrete. Construction and Building Materials, 261. ISSN 09500618

Alaloul, W.S. and Musarat, M.A. and A Tayeh, B. and Sivalingam, S. and Rosli, M.F.B. and Haruna, S. and Khan, M.I. (2020) Mechanical and deformation properties of rubberized engineered cementitious composite (ECC). Case Studies in Construction Materials, 13. ISSN 22145095

Mohammed, B.S. and Haruna, S. and Wahab, M.M.A. and Liew, M.S. and Haruna, A. (2019) Mechanical and microstructural properties of high calcium fly ash one-part geopolymer cement made with granular activator. Heliyon, 5 (9). ISSN 24058440

Mohammed, B.S. and Haruna, S. and Mubarak bn Abdul Wahab, M. and Liew, M.S. (2019) Optimization and characterization of cast in-situ alkali-activated pastes by response surface methodology. Construction and Building Materials, 225. pp. 776-787. ISSN 09500618

Haruna, A. and Shafiq, N. and Montasir, O.A. and Haruna, S. (2018) Barriers for developing Building with low embodied energy multi criteria decision making approach. International Journal of Engineering and Technology(UAE), 7 (4). pp. 3126-3130. ISSN 2227524X

Haruna, S. and Mohammed, B.S. and Shahir-Liew, M. and Alaloul, W.S. and Haruna, A. (2018) Effect of water-binder ratio and naoh molarity on the properties of high calcium fly ash geopolymer mortars at outdoor curing. International Journal of Civil Engineering and Technology, 9 (10). pp. 1339-1352. ISSN 09766308