Article

Taufiqurrahman, I. and Ginta, T.L. and Ahmad, A. and Mustapha, M. and Fatmahardi, I. and Shozib, I.A. (2022) The effect of aluminum interlayer on weld strength, microstructure analysis, and welding parameters optimization in resistance spot welding of stainless steel 316L and Ti6Al4V titanium alloy. Engineering Solid Mechanics, 10 (2). pp. 165-178. ISSN 22918744

Zakaria, M.S. and Ginta, T.L. and Azmi, A.I. (2021) A Coupled Eulerian Lagrangian (CEL) Model in Prediction Tool Temperature. Lecture Notes in Mechanical Engineering. pp. 1237-1244. ISSN 21954356

Taufiqurrahman, I. and Ahmad, A. and Mustapha, M. and Ginta, T.L. and Haryoko, L.A.F. and Shozib, I.A. (2021) The effect of welding current and electrode force on the heat input, weld diameter, and physical and mechanical properties of SS316l/Ti6Al4V dissimilar resistance spot welding with aluminum interlayer. Materials, 14 (5). pp. 1-20. ISSN 19961944

Bakthavatchalam, B. and Habib, K. and Shaik, N.B. and Ginta, T.L. and Saidur, R. and Saidur, R. (2020) Analysis of Multiwalled Carbon Nanotubes Porosimetry And Their Thermal Conductivity with Ionic Liquid-Based Solvents. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 77 (2). pp. 63-75. ISSN 22897879

Muhammed, M. and Mustapha, M. and Ginta, T.L. and Ali, A.M. and Mustapha, F. and Hampo, C.C. (2020) Statistical review of microstructure-property correlation of stainless steel: Implication for preand post-weld treatment. Processes, 8 (7). ISSN 22279717

Aliyu, A.A. and Abdul-Rani, A.M. and Ginta, T.L. and Rao, T.V.V.L. and Axinte, E. and Ali, S. and Ramli, M.N. (2019) Hydroxyapatite electro discharge coating of Zr-based bulk metallic glass for potential orthopedic application. Key Engineering Materials, 796. pp. 123-128. ISSN 10139826

Aliyu, A.�A.A. and Abdul-Rani, A.M. and Ginta, T.L. and Prakash, C. and Rao, T.V.V.L.N. and Axinte, E. and Ali, S. (2019) Synthesis and characterization of bioceramic oxide coating on Zr-Ti-Cu-Ni-Be BMG by electro discharge process. Lecture Notes in Mechanical Engineering. pp. 518-531. ISSN 21954356

Zaharin, H.A. and Rani, A.M.A. and Azam, F.I. and Ginta, T.L. and Sallih, N. and Ahmad, A. and Yunus, N.A. and Zulkifli, T.Z.A. (2018) Effect of unit cell type and pore size on porosity and mechanical behavior of additively manufactured Ti6Al4V scaffolds. Materials, 11 (12). ISSN 19961944

Aliyu, A.A.A. and Abdul-Rani, A.M. and Ginta, T.L. and Rao, T.V.V.L.N. and Selvamurugan, N. and Roy, S. (2018) Hydroxyapatite mixed-electro discharge formation of bioceramic Lakargiite (CaZrO3) on Zr�Cu�Ni�Ti�Be for orthopedic application. Materials and Manufacturing Processes, 33 (16). pp. 1734-1744. ISSN 10426914

Puspitasari, P. and Fauzan, R. and Ginta, T.L. and Mustapha, M. and Puspitasari, D. (2018) Morphology of aluminium with nickel addition on sand casting process. Journal of Achievements in Materials and Manufacturing Engineering, 87 (1). pp. 13-17. ISSN 17348412

Puspitasari, D. and Ginta, T.L. and Mustapha, M. and Sallih, N. and Puspitasari, P. (2018) Statistical optimization of stress relieving parameters on closed cell aluminium foam using central composite design. Archives of Materials Science and Engineering, 89 (2). pp. 55-63. ISSN 18972764

Puspitasari, D. and Ginta, T.L. and Puspitasari, P. and Mustapha, M. (2018) The effect of thermal processing parameters on the mechanical properties of aluminium alloy foam. Journal of Achievements in Materials and Manufacturing Engineering, 91 (1). pp. 12-17. ISSN 17348412

Nizam, N.F.I.A. and Sallih, N. and Puspitasari, D. and Ginta, T.L. and Mustapha, M. (2018) The influence of substrate surface energy on the adhesion compatibility of epoxy adhesive using molecular simulation tool. ARPN Journal of Engineering and Applied Sciences, 13 (8). pp. 2786-2792. ISSN 18196608

Abdul-Rani, A.M. and Nanimina, A.M. and Ginta, T.L. and Razak, M.A. (2017) Machined Surface Quality in Nano Aluminum Mixed Electrical Discharge Machining. Procedia Manufacturing, 7. pp. 510-517. ISSN 23519789

Aliyu, A.A. and Abdul-Rani, A.M. and Ginta, T.L. and Prakash, C. and Axinte, E. and Razak, M.A. and Ali, S. (2017) A Review of Additive Mixed-Electric Discharge Machining: Current Status and Future Perspectives for Surface Modification of Biomedical Implants. Advances in Materials Science and Engineering, 2017. ISSN 16878434

Abdul-Rani, A.M. and Nanimina, A.M. and Ginta, T.L. (2017) Surface morphology and corrosion behavior in nano pmedm. Key Engineering Materials, 724 KE. pp. 61-65. ISSN 10139826

Danish, M. and Ginta, T.L. and Habib, K. and Carou, D. and Rani, A.M.A. and Saha, B.B. (2017) Thermal analysis during turning of AZ31 magnesium alloy under dry and cryogenic conditions. International Journal of Advanced Manufacturing Technology, 91 (5-8). pp. 2855-2868. ISSN 02683768

Abdul-Rani, A.M. and Nanimina, A.M. and Ginta, T.L. and Rao, T.V.V.L.N. and Pedapati, S.R. (2016) Application of nano aluminum in modified EDM: pmedm. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12117-12121. ISSN 18196608

Yasir, M. and Ginta, T.L. and Ariwahjoedi, B. and Alkali, A.U. and Danish, M. (2016) Effect of cutting speed and feed rate on surface roughness of AISI 316l SS using end-milling. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2496-2500. ISSN 18196608

Danish, M. and Ginta, T.L. and Wahjoedi, B.A. (2016) Enhanced functional properties of Mg alloys by cryogenic machining. International Journal of Applied Engineering Research, 11 (7). pp. 5055-5059. ISSN 09734562

Yasir, M. and Ginta, T.L. and Ariwahjoedi, B. and Danish, M. and Alkali, A.U. (2016) Evaluation of chips formation of AISI 316L SS using precision end-milling. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12903-12907. ISSN 18196608

Danish, M. and Ginta, T.L. and Wahjoedi, B.A. and Yasir, M. and Alkali, A.U. (2016) Investigation of the temperature distribution on the tool and workpiece during cryogenic machining of mg alloy by finite element analysis. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14259-14263. ISSN 18196608

Alkali, A.U. and Ginta, T.L. and Abdulrani, A.M. and Fawad, H. and Yasir, M. and Danish, M. (2016) Study of tool life of uncoated WC-Co insert during flame assisted machining of 316L stainless steel. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13441-13447. ISSN 18196608

Alkali, A.U. and Ginta, T.L. and Abdulrani, A.M. and Fawad, H. and Danish, M. (2016) Study on the machinability of 316L stainless steel using flame assisted machining. ARPN Journal of Engineering and Applied Sciences, 11 (14). pp. 8743-8749. ISSN 18196608

Danish, M. and Ginta, T.L. and Alkali, A.U. and Yasir, M. (2016) Thermal analysis of cryogenic machining of Mg alloy using FEM. ARPN Journal of Engineering and Applied Sciences, 11 (8). pp. 5134-5138. ISSN 18196608

Mauliddin, D.S. and Ginta, T.L. (2016) The effect of repeated welding cycles on the microstructure and ferrite content of 25cr super duplex stainless steel weld metal by automatic orbital tig welding. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 11982-11987. ISSN 18196608

Mauliddin, D.S. and Ginta, T.L. (2016) The effect of repeated welding cycles on the properties of 25Cr super duplex stainless steel by automatic orbital TIG welding. ARPN Journal of Engineering and Applied Sciences, 11 (14). pp. 8754-8758. ISSN 18196608

Johari, M.I.A. and Mustapha, M. and Mamat, O. and Kakooei, S. and Ginta, T.L. and Ismadi, M.Z.P. (2016) The microstructure, physical and mechanical properties of silicon carbide with alumina and yttria as sintering additives. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13300-13304. ISSN 18196608

Karim, A.N.M. and Ikram, M. and Emrul Kays, H.M. and Abdesselam, M. and Ginta, T.L. (2014) Assessment of machining cost for end-milling of Ti-6Al-4V titanium alloy through RSM-based parametric model. Advanced Materials Research, 903. pp. 83-89. ISSN 10226680

Abdul-Rani, A.M. and Ismail, M.Z. and Zaky, M.A. and Noor, M.H.M. and Zhun, Y.Y. and Ganesan, K. and Rao, T.V.V.L.N. and Kamal, S. and Ginta, T.L. (2014) Improving rate of penetration for PDC drill bit using reverse engineering. Applied Mechanics and Materials, 607. pp. 153-160. ISSN 16609336

Alkali, A.U. and Ginta, T.L. and Abdul-Rani, A.M. (2014) Parametric control of oxyacetylene flame profile. Advanced Materials Research, 845. pp. 790-794. ISSN 10226680

Ginta, T.L. and Nurul Annn, A.K.M. (2013) Surface integrity in end milling titanium alloy Ti-6A1-4V under heat assisted machining. Asian Journal of Scientific Research, 6 (3). pp. 609-614. ISSN 19921454

Ginta, T.L. and Amin, A.K.M.N. (2013) Thermally-assisted end milling of titanium alloy Ti-6Al-4V using induction heating. International Journal of Machining and Machinability of Materials, 14 (2). pp. 194-212. ISSN 17485711

Ginta, T.L. and Nurul Amin, A.K.M. and Lajis, M.A. (2012) Suppressed vibrations during thermal-assisted machining of titanium alloy Ti-6A1-4V using PCD inserts. Journal of Applied Sciences, 12 (23). pp. 2418-2423. ISSN 18125654

Conference or Workshop Item

Andoko, A. and Nauri, I.M. and Paryono, P. and Kurniawan, P. and Pradica, D.R. and Jeadi, R.P. and Prasetya, R. and Ginta, T.L. (2020) Failure analysis of connecting rod. In: UNSPECIFIED.

Andoko, A. and Nauri, I.M. and Paryono, P. and Pradica, D.R. and Kurniawan, P. and Jeadi, R.P. and Prasetya, R. and Ginta, T.L. (2020) Failure analysis on the connecting rod by finite element method. In: UNSPECIFIED.

Mohammed, H.G. and Ginta, T.L. and Mustapha, M. (2020) The investigation of microstructure and mechanical properties of resistance spot welded AISI 316L austenitic stainless steel. In: UNSPECIFIED.

Permanasari, A.A. and Kuncara, B.S. and Puspitasari, P. and Sukarni, S. and Ginta, T.L. and Irdianto, W. (2019) Convective heat transfer characteristics of TiO2-EG nanofluid as coolant fluid in heat exchanger. In: UNSPECIFIED.

Danish, M. and Ginta, T.L. and Rani, A.M.A. and Carou, D. and Davim, J.P. and Rubaiee, S. and Ghazali, S. (2019) Investigation of surface integrity induced on AZ31C magnesium alloy turned under cryogenic and dry conditions. In: UNSPECIFIED.

Permanasari, A.A. and Puspitasari, P. and Sukarni, S. and Irdianto, W. and Ginta, T.L. and Gilang, D. (2019) Thermophysical properties and heat transfer performance of TiO2-Distilled water nanofluid using shell and tube heat exchanger. In: UNSPECIFIED.

Zaharin, H.A. and Abdul Rani, A.M. and Ginta, T.L. and Azam, F.I. (2018) Additive Manufacturing Technology for Biomedical Components: A review. In: UNSPECIFIED.

Abdul-Rani, A.M. and Aliyu, A.A.A. and Hastuty, S. and Ginta, T.L. and Rao, T.V.V.L.N. and Ali, S. (2018) Enhancing surface quality of Zr-Cu-Ni-Ti-Be through hydroxyapatite mixed EDM for potential orthopedic application. In: UNSPECIFIED.

Alkali, A.U. and Ginta, T.L. and Abdulrani, A.M. and Elsiti, N.M. (2018) Fundamental investigation on influence of external heat on chip formation during thermal assisted machining. In: UNSPECIFIED.

Puspitasari, D. and Rabie, F.K.H. and Ginta, T.L. and Kurnia, J.C. and Mustapha, M. (2018) The Influence of Temperature on Stability of Aluminum Foam Cell Wall during Foaming Process. In: UNSPECIFIED.

Rosidi, A. and Ginta, T.L. and Abdul Rani, A.M.B. (2017) Optimization of bone drilling parameters using Taguchi method based on finite element analysis. In: UNSPECIFIED.

Alkali, A.U. and Ginta, T.L. and Abdul-Rani, A.M. (2015) Experimental investigation and 3D finite element prediction of temperature distribution during travelling heat sourced from oxyacetylene flame. In: UNSPECIFIED.

Nanimina, A.M. and Abdul Rani, A.M. and Ginta, T.L. (2014) Assessment of powder mixed EDM: A review. In: UNSPECIFIED.

Alkali, A.U. and Ginta, T.L. and Abdul-Rani, A.M. (2014) Finite element modelling of a pattern of temperature distribution during travelling heat source from oxyacetylene flame. In: UNSPECIFIED.

Book

Nurul Amin, A.K.M. and Ginta, T.L. (2014) Heat-Assisted Machining. Elsevier Ltd, pp. 297-331. ISBN 9780080965338