Article

Gul, I.A. and Abdul Rani, A.M. and Al-Amin, M. and Danish, M. and Rubaiee, S. and Ahmed, A. and Zhang, C. (2024) Investigating surface integrity, corrosion resistance and biocompatibility of 316L steel using carbon nanotube-assisted EDM process. Results in Engineering, 21.

Qasim, M. and Ayoub, M. and Singh, K. and Inayat, A. and Shamsuddin, R. and Danish, M. and Farrukh, S. (2023) A Comparative Study of Eggshell and Commercial Sorbent-Based Catalysts through Synthesis and Characterization for SESR Process. Sustainability (Switzerland), 15 (20). ISSN 20711050

Aliyu, A.A. and Abdul-Rani, A.M. and Al-Amin, M. and Hastuty, S. and Razak, M.A. and Ali, S. and Danish, M. and Rubaiee, S. and Bin Mahfouz, A. and Hamza, A.N. (2023) Deposition of biomimetic biocompatible oxides on metallic glass surface by electro-discharge coating process Abscheidung biomimetischer biokompatibler Oxide auf metallischen Glasoberflächen durch elektrische Entladungsbeschichtung. Materialwissenschaft und Werkstofftechnik, 54 (1). pp. 129-136.

Warsi Khan, H. and Kaif Khan, M. and Moniruzzaman, M. and Al Mesfer, M.K. and Danish, M. and Irshad, K. and Yusuf, M. and Kamyab, H. and Chelliapan, S. (2023) Evaluating ionic liquids for its potential as eco-friendly solvents for naproxen removal from water sources using COSMO-RS: Computational and experimental validation. Environmental Research, 231.

Al-Amin, M. and Danish, M. and Rubaiee, S. and Ahmed, A. and Abdul-Rani, A.M. and Mannan, A. and Yildirim, M.B. (2023) Improvement in 316L steel surface features, corrosion and biocompatibility through novel CNT-assisted hydroxyapatite powder mixed-EDM process. Applied Physics A: Materials Science and Processing, 129 (7).

Danish, M. and Al-Amin, M. and Rubaiee, S. and Parameswari, R.P. and Abdul-Rani, A.M. and Ahmed, A. and Yildirim, M.B. (2023) Investigation of coated 316L steel surface employing carbon nanotubes mixed-electrical discharge machining for biomedical applications. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.

Danish, M. and Al-Amin, M. and Rubaiee, S. and Gul, I.A. and Ahmed, A. and Rahman, M.O. and Zhang, C. and Yildirim, M.B. (2023) Investigation of coated 316L steel surface: Surface morphology, composition, corrosion, and biocompatibility using hydroxyapatite mixed-EDM process. Surface and Coatings Technology, 467.

Danish, M. and Al-Amin, M. and Abdul-Rani, A.M. and Rubaiee, S. and Ahmed, A. and Zohura, F.T. and Ahmed, R. and Yildirim, M.B. (2023) Optimization of hydroxyapatite powder mixed electric discharge machining process to improve modified surface features of 316L stainless steel. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 237 (3). pp. 881-895.

Danish, M. and Al-Amin, M. and Rubaiee, S. and Abdul-Rani, A.M. and Zohura, F.T. and Ahmed, A. and Ahmed, R. and Yildirim, M.B. (2022) Enhanced machining features and multi-objective optimization of CNT mixed-EDM process for processing 316L steel. International Journal of Advanced Manufacturing Technology, 120 (9-10). pp. 6125-6141. ISSN 02683768

Al-Amin, M. and Abdul-Rani, A.M. and Rana, M. and Hastuty, S. and Danish, M. and Rubaiee, S. and Mahfouz, A.B. (2022) Evaluation of modified 316L surface properties through HAp suspended EDM process for biomedical application. Surfaces and Interfaces, 28. ISSN 24680230

Al-Amin, M. and Abdul-Rani, A.M. and Rao, T.V.V.L.N. and Danish, M. and Rubaiee, S. and Mahfouz, A.B. and Parameswari, R.P. and Wani, M.F. (2022) Investigation of machining and modified surface features of 316L steel through novel hybrid of HA/CNT added-EDM process. Materials Chemistry and Physics, 276. ISSN 02540584

Zakaria, M.S. and Mustapha, M. and Azmi, A.I. and Ahmad, A. and Danish, M. and Rubaiee, S. (2022) Machinability investigations of AZ31 magnesium alloy via submerged convective cooling in turning process. Journal of Materials Research and Technology, 19. pp. 3685-3698. ISSN 22387854

Maqsood, K. and Ali, A. and Ilyas, S.U. and Garg, S. and Danish, M. and Abdulrahman, A. and Rubaiee, S. and Alsaady, M. and Hanbazazah, A.S. and Mahfouz, A.B. and Ridha, S. and Mubashir, M. and Lim, H.R. and Khoo, K.S. and Show, P.L. (2022) Multi-objective optimization of thermophysical properties of multiwalled carbon nanotubes based nanofluids. Chemosphere, 286. ISSN 00456535

Al-Amin, M. and Abdul-Rani, A.M. and Danish, M. and Zohura, F.T. and Rubaiee, S. and Ahmed, R. and Ali, S. and Sarikaya, M. (2021) Analysis of hybrid HA/CNT suspended-EDM process and multiple-objectives optimization to improve machining responses of 316L steel. Journal of Materials Research and Technology, 15. pp. 2557-2574. ISSN 22387854

Alkarkhi, A.F.M. and Danish, M. and Abu Amr, S.S. and Alqaraghuli, W.A.A. and Ayoub, M. (2021) Evaluation and mechanism of glucose production through acid hydrolysis process: Statistical approach. Biocatalysis and Agricultural Biotechnology, 36. ISSN 18788181

Zahid, I. and Ayoub, M. and Abdullah, B.B. and Mukhtar, A. and Saqib, S. and Rafiq, S. and Ullah, S. and Al-Sehemi, A.G. and Farrukh, S. and Danish, M. (2021) Glycerol Conversion to Solketal: Catalyst and Reactor Design, and Factors Affecting the Yield. ChemBioEng Reviews, 8 (3). pp. 227-238. ISSN 21969744

Al-Amin, M. and Abdul-Rani, A.M. and Danish, M. and Rubaiee, S. and Mahfouz, A.B. and Thompson, H.M. and Ali, S. and Unune, D.R. and Sulaiman, M.H. (2021) Investigation of coatings, corrosion and wear characteristics of machined biomaterials through hydroxyapatite mixed-edm process: A review. Materials, 14 (13). ISSN 19961944

Ali, A. and Ilyas, S.U. and Danish, M. and Abdulrahman, A. and Maqsood, K. and Ahmed, A. and Murshid, G. and Rubaiee, S. and Alsaady, M. and Mahfouz, A.B. and Hanbazazah, A.S. (2021) Multi-objective optimization of thermophysical properties of f�Al2O3 nano-dispersions in heat transfer oil. SN Applied Sciences, 3 (2). ISSN 25233971

Al-Amin, M. and Abdul-Rani, A.M. and Danish, M. and Thompson, H.M. and Abdu Aliyu, A.A. and Hastuty, S. and Zohura, F.T. and Bryant, M.G. and Rubaiee, S. and Rao, T.V.V.L.N. (2020) Assessment of PM-EDM cycle factors influence on machining responses and surface properties of biomaterials: A comprehensive review. Precision Engineering, 66. pp. 531-549. ISSN 01416359

Al-Amin, M. and Abdul Rani, A.M. and Abdu Aliyu, A.A. and Bryant, M.G. and Danish, M. and Ahmad, A. (2020) Bio-ceramic coatings adhesion and roughness of biomaterials through PM-EDM: a comprehensive review. Materials and Manufacturing Processes. pp. 1157-1180. ISSN 10426914

Danish, M. and kale, P. and Ahmad, T. and Ayoub, M. and Geremew, B. and Adeloju, S. (2020) Conversion of flaxseed oil into biodiesel using KOH catalyst: Optimization and characterization dataset. Data in Brief, 29. ISSN 23523409

Aliyu, A.A. and Abdul-Rani, A.M. and Rubaiee, S. and Danish, M. and Bryant, M. and Hastuty, S. and Razak, M.A. and Ali, S. (2020) Electro-discharge machining of Zr67Cu11Ni10Ti9Be3: An investigation on hydroxyapatite deposition and surface roughness. Processes, 8 (6). ISSN 22279717

Zahid, I. and Ayoub, M. and Abdullah, B.B. and Nazir, M.H. and Ameen, M. and Zulqarnain and Mohd Yusoff, M.H. and Inayat, A. and Danish, M. (2020) Production of Fuel Additive Solketal via Catalytic Conversion of Biodiesel-Derived Glycerol. Industrial and Engineering Chemistry Research, 59 (48). pp. 20961-20978. ISSN 08885885

Aslantas, K. and Danish, M. and Hasçelik, A. and Mia, M. and Gupta, M. and Ginta, T. and Ijaz, H. (2020) investigations on surface roughness and toolwear characteristics in micro-turning of Ti-6Al-4V alloy. Materials, 13 (13). pp. 1-20. ISSN 19961944

Nasrullah, A. and Saad, B. and Bhat, A.H. and Khan, A.S. and Danish, M. and Isa, M.H. and Naeem, A. (2019) Mangosteen peel waste as a sustainable precursor for high surface area mesoporous activated carbon: Characterization and application for methylene blue removal. Journal of Cleaner Production, 211. pp. 1190-1200. ISSN 09596526

Ahmad, T. and Danish, M. and Kale, P. and Geremew, B. and Adeloju, S.B. and Nizami, M. and Ayoub, M. (2019) Optimization of process variables for biodiesel production by transesterification of flaxseed oil and produced biodiesel characterizations. Renewable Energy, 139. pp. 1272-1280. ISSN 09601481

Nasrullah, A. and Bhat, A.H. and Naeem, A. and Isa, M.H. and Danish, M. (2018) High surface area mesoporous activated carbon-alginate beads for efficient removal of methylene blue. International Journal of Biological Macromolecules, 107. pp. 1792-1799. ISSN 01418130

Nasrullah, A. and Bhat, A.H. and Isa, M.H. and Danish, M. and Naeem, A. and Muhammad, N. and Khan, T. (2017) Efficient removal of methylene blue dye using mangosteen peel waste: Kinetics, isotherms and artificial neural network (ANN) modeling. Desalination and Water Treatment, 86. pp. 191-202. ISSN 19443994

Yousuff, C.M. and Danish, M. and Ho, E.T.W. and Basha, I.H.K. and Hamid, N.H.B. (2017) Study on the optimum cutting parameters of an aluminum mold for effective bonding strength of a PDMS microfluidic device. Micromachines, 8 (8). ISSN 2072666X

Danish, M. and Ginta, T.L. and Habib, K. and Carou, D. and Rani, A.M.A. and Saha, B.B. (2017) Thermal analysis during turning of AZ31 magnesium alloy under dry and cryogenic conditions. International Journal of Advanced Manufacturing Technology, 91 (5-8). pp. 2855-2868. ISSN 02683768

Yasir, M. and Ginta, T.L. and Ariwahjoedi, B. and Alkali, A.U. and Danish, M. (2016) Effect of cutting speed and feed rate on surface roughness of AISI 316l SS using end-milling. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2496-2500. ISSN 18196608

Danish, M. and Ginta, T.L. and Wahjoedi, B.A. (2016) Enhanced functional properties of Mg alloys by cryogenic machining. International Journal of Applied Engineering Research, 11 (7). pp. 5055-5059. ISSN 09734562

Yasir, M. and Ginta, T.L. and Ariwahjoedi, B. and Danish, M. and Alkali, A.U. (2016) Evaluation of chips formation of AISI 316L SS using precision end-milling. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12903-12907. ISSN 18196608

Danish, M. and Ginta, T.L. and Wahjoedi, B.A. and Yasir, M. and Alkali, A.U. (2016) Investigation of the temperature distribution on the tool and workpiece during cryogenic machining of mg alloy by finite element analysis. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14259-14263. ISSN 18196608

Alkali, A.U. and Ginta, T.L. and Abdulrani, A.M. and Fawad, H. and Yasir, M. and Danish, M. (2016) Study of tool life of uncoated WC-Co insert during flame assisted machining of 316L stainless steel. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13441-13447. ISSN 18196608

Alkali, A.U. and Ginta, T.L. and Abdulrani, A.M. and Fawad, H. and Danish, M. (2016) Study on the machinability of 316L stainless steel using flame assisted machining. ARPN Journal of Engineering and Applied Sciences, 11 (14). pp. 8743-8749. ISSN 18196608

Danish, M. and Ginta, T.L. and Alkali, A.U. and Yasir, M. (2016) Thermal analysis of cryogenic machining of Mg alloy using FEM. ARPN Journal of Engineering and Applied Sciences, 11 (8). pp. 5134-5138. ISSN 18196608

Conference or Workshop Item

Ayoub, M. and Yusoff, M.H.M. and Yusup, S.B. and Danish, M. and Ullah, S. and Farrukh, S. (2020) Effect of microwave irradiation on the etherification of biodiesel-derived glycerol in a solvent free process. In: UNSPECIFIED.

Danish, M. and Ginta, T.L. and Rani, A.M.A. and Carou, D. and Davim, J.P. and Rubaiee, S. and Ghazali, S. (2019) Investigation of surface integrity induced on AZ31C magnesium alloy turned under cryogenic and dry conditions. In: UNSPECIFIED.

Danish, M. and Naqvi, M. and Farooq, U. and Naqvi, S. (2015) Characterization of South Asian Agricultural Residues for Potential Utilization in Future 'energy mix'. In: UNSPECIFIED.

Book

Danish, M. and Yasir, M. and Mia, M. and Nazir, K. and Ahmed, T. and Rani, A.M.A. (2020) High speed machining of magnesium and its alloys. Elsevier, pp. 263-282. ISBN 9780128150207; 9780128150214