Article

Najm, A.S. and Selvanathan, V. and Aljuwaya, T.M. and Sabri, L.S. and Jamal, M.S. and Abdullah Al-Zahrani, A. and Holi, A.M. and Jaber, I. and Al Ghamdi, A. and Amin, M.T. and Sopian, K. and Ismail, R.A. and Moria, H. and Bais, B. and Majdi, H.S. and Chowdhury, S. and Sultan, A.J. and Alhuzaymi, T.M. (2023) Recent progress in performance improvement strategies for quantum dot sensitization methods: Challenges, achievements, and future prospects. APL Materials, 11 (9). ISSN 2166532X

Chowdhury, S. and Al-Mamun, A. and Zulfiqar, M. and Alam, M.M. and Rahman, M.M. (2022) Statistical Optimization and Modeling Approach for Fenton-like Discoloration of Methyl Orange using Green Zero-valent Iron Nanoparticle Catalysts. ChemistrySelect, 7 (5). ISSN 23656549

Zulfiqar, M. and Chowdhury, S. and Samsudin, M.F.R. and Siyal, A.A. and Omar, A.A. and Ahmad, T. and Sufian, S. (2020) Effect of organic solvents on the growth of TiO2 nanotubes: An insight into photocatalytic degradation and adsorption studies. Journal of Water Process Engineering, 37. ISSN 22147144

Zulfiqar, M. and Chowdhury, S. and Omar, A.A. and Siyal, A.A. and Sufian, S. (2020) Response surface methodology and artificial neural network for remediation of acid orange 7 using TiO2-P25: optimization and modeling approach. Environmental Science and Pollution Research, 27 (27). pp. 34018-34036. ISSN 09441344

Akilu, S. and Baheta, A.T. and Chowdhury, S. and Padmanabhan, E. and Sharma, K.V. (2019) Thermophysical profile of SiC�CuO/C nanocomposite in base liquid ethylene glycol. Powder Technology, 354. pp. 540-551. ISSN 00325910

Zulfiqar, M. and Chowdhury, S. and Sufian, S. and Omar, A.A. (2018) Enhanced photocatalytic activity of Orange II in aqueous solution using solvent-based TiO2 nanotubes: Kinetic, equilibrium and thermodynamic studies. Journal of Cleaner Production, 203. pp. 848-859. ISSN 09596526

Zulfiqar, M. and Chowdhury, S. and Omar, A.A. (2018) Hydrothermal synthesis of multiwalled TiO2 nanotubes and its photocatalytic activities for Orange II removal. Separation Science and Technology (Philadelphia), 53 (9). pp. 1412-1422. ISSN 01496395

Tran, N.T.T. and Uemura, Y. and Chowdhury, S. and Ramli, A. (2016) Vapor-phase hydrodeoxygenation of guaiacol on Al-MCM-41 supported Ni and Co catalysts. Applied Catalysis A: General, 512. pp. 93-100. ISSN 0926860X

Khanam, T. and Rashedi, A. and Chowdhury, S. and Asundi, A.K. (2014) Comparison of image processing methods for the detection of particle from digital hologram. Applied Mechanics and Materials, 625. pp. 444-447. ISSN 16609336

Hamzah, N.H.A. and Chowdhury, S. and Sufian, S. and Omar, A.A. and Inayat, A. (2014) Development of morphology dependent titania nanomaterial for photo degradation of dyes. Applied Mechanics and Materials, 625. pp. 349-352. ISSN 16609336

Ahmed, I. and Idris, A. and Khan, M.S. and Chowdhury, S. and Akhtar, J. (2014) Effect of acetone on physical properties of PES membrane. Applied Mechanics and Materials, 625. pp. 545-548. ISSN 16609336

Chowdhury, S. and Leng, T.W. and Ahmed, I. and Bustam, A. and Shariff, A.M. (2014) Fine structural analysis of solvent activated Cu-BTC for carbon dioxide capture. Applied Mechanics and Materials, 625. pp. 209-212. ISSN 16609336

Chowdhury, S. and Inayat, A. and Abdullah, B. and Omar, A.A. and Ganguly, S. (2014) Hydrogen and syngas generation from gasification of coal in an integrated fuel processor. Applied Mechanics and Materials, 625. pp. 644-647. ISSN 16609336

Azhar, M.A.I.M. and Chowdhury, S. and Mandal, P.C. and Daman, M.F. and Bhattacharjee, S. and Khanam, T. (2014) Ionic liquid-assisted synthesis and characterization of cerium oxide nanocubes for degradation of methylene blue. Applied Mechanics and Materials, 625. pp. 164-167. ISSN 16609336

Chakraborty, A. and Moniruzzaman, M. and Chowdhury, S. and Bhattacharjee, S. (2014) Kinetic studies on gold nanoparticle formation in aqueous medium. Applied Mechanics and Materials, 625. pp. 263-266. ISSN 16609336

Abdullah, B.B. and Vo, D.-V.N. and Chowdhury, S. (2014) Modeling the effect of temperature-induced surface tension gradient in coating processes. Advanced Materials Research, 917. pp. 181-188. ISSN 10226680

Lee, Y.T. and Chowdhury, S. and Bustam, M.A. and Mutalib, M.I.A. and Norani, M.M. (2014) Morphology controlled ionothermal synthesis and characterization of ceria nanomaterials. Advanced Materials Research, 1024. pp. 112-115. ISSN 10226680

Zulfiqar, M. and Omar, A.A. and Chowdhury, S. (2014) Removal of phosphate and fluoride from industrial wastewater � A short review. Applied Mechanics and Materials, 625. pp. 805-808. ISSN 16609336

Yasir, M. and Chowdhury, S. and Mansor, N. and Mohammad, N.M. and Uemura, Y. (2014) Upgrading of pyrolysis bio-oil to fuel over supported nanomaterials �A review. Applied Mechanics and Materials, 625. pp. 357-360. ISSN 16609336

Subbarao, D. and Mohd. Zabidi, N.A. and Chowdhury, S. and Bustam-Khalil, M.A. and Mutalib, M.I.A. (2014) An equation of state for the liquid phase. Applied Mechanics and Materials, 625. pp. 582-585. ISSN 16609336

Tran, N. and Uemura, Y. and Chowdhury, S. and Ramli, A. (2014) A review of bio-oil upgrading by catalytic hydrodeoxygenation. Applied Mechanics and Materials, 625. pp. 255-258. ISSN 16609336

Book

Chowdhury, S. and Yasir, M. and Uemura, Y. and Mohamed, N.M. and Uddin, A. and Yanagida, T. (2015) Application of micro-or small-scale biomass-derived fuel system for power generation. Springer International Publishing, pp. 339-367. ISBN 9783319075785; 9783319075778

Chowdhury, S. and Yasir, M. and Uemura, Y. and Mohamed, N.M. and Uddin, A. and Yanagida, T. (2014) Application of micro-or small-scale biomass-derived fuel system for power generation. Springer International Publishing, pp. 339-367. ISBN 9783319075785; 3319075772; 9783319075778