Article

Azeem, M. and Ya, H.H. and Alam, M.A. and Muhammad, M. and M Sapuan, S. and Kumar, M. and Gemi, L. and Maziz, A. and Ismail, A.R. and Khan, S.H. (2024) Impact response of filament-wound structure with polymeric liner: Experimental and numerical investigation (Part-A). Results in Engineering, 21.

Azeem, M. and Ya, H.H. and Azad Alam, M. and Kumar, M. and Sajid, Z. and Gohari, S. and Maziz, A. and Gemi, L. and Abdullah, S.I.B.S. and Khan, S.H. (2024) Influence of winding angles on hoop stress in composite pressure vessels: Finite element analysis. Results in Engineering, 21.

Ma, Q. and Rejab, M.R.M. and Azeem, M. and Hassan, S.A. and Yang, B. and Kumar, A.P. (2024) Opportunities and challenges on composite pressure vessels (CPVs) from advanced filament winding machinery: A short communication. International Journal of Hydrogen Energy, 57. pp. 1364-1372.

Ahmed, T. and Ya, H.H. and Alam, M.A. and Azeem, M. and Khan, M.R. and Sapuan, S.M. and Yusuf, M. and Afridi, J. (2024) Tribological and morphological properties of bentonite nano-clay/CaCO3 reinforced high-density polyethylene nanocomposites. Polymer Composites, 45 (3). pp. 2063-2079.

Alam, M.A. and Ya, H.B. and Azeem, M. and Mustapha, M. and Yusuf, M. and Masood, F. and Marode, R.V. and Sapuan, S.M. and Ansari, A.H. (2023) Advancements in aluminum matrix composites reinforced with carbides and graphene: A comprehensive review. Nanotechnology Reviews, 12 (1).

Ma, Q. and Rejab, M.R.M. and Azeem, M. and Idris, M.S. and Rani, M.F. and Kumar, A.P. (2023) Axial and radial crushing behaviour of thin-walled carbon fiber-reinforced polymer tubes fabricated by the real-time winding angle measurement system. Forces in Mechanics, 10.

Ma, Q. and Rejab, M.R.M. and Hassan, S.A. and Azeem, M. and Saffirna, M.S. (2023) Failure Behavior Analysis of the Spherical-Roof Contoured Core (SRCC) Under Quasi-Static Loading: A Numerical Study. Journal of Failure Analysis and Prevention, 23 (2). pp. 511-519.

Azeem, M. and Haji Ya, H. and Azad Alam, M. and Sadique, M.R. and Mustapha, M.B. and Akmar Bin Mokhtar, A. and Ahmed, T. and Sultan, M.T.H. and Khan, R. (2023) Growth of NGVs and Comparative Study of Cylinder Material for CNG Storage. Lecture Notes in Mechanical Engineering. pp. 689-704.

Ma, Q. and Rejab, M.R.M. and Abu Hassan, S. and Hu, H. and Azeem, M. and Yunus Nasution, A. (2023) Impact behaviour of spherical-roof contoured-core (SRCC) sandwich panel under the low-velocity impact (LVI): A numerical investigation. Materials Today: Proceedings.

Alam, M.A. and Ya, H.H. and Qistina, N.A. and Azeem, M. and Mustapha, M. and Yusuf, M. and Masood, F. and Khan, R. and Ahmad, T. (2023) Investigating the Microhardness Behavior of Al6061/TiC Surface Composites Produced by Friction Stir Processing. International Journal of Computational Methods and Experimental Measurements, 11 (3). pp. 157-161.

Ahmed, T. and Ya, H.H. and Majid, M.A.A. and Imran, M. and Khan, R. and Azeem, M. and Azad Alam, M. and Khalid, H.U. and Mehmood, A. (2023) The Study of Pseudo-ductile Polymer Nano Composite Reinforced with Non-treated Inorganic Nanofillers. Lecture Notes in Mechanical Engineering. pp. 981-992.

Azeem, M. and Ya, H.H. and Kumar, M. and Stabla, P. and Smolnicki, M. and Gemi, L. and Khan, R. and Ahmed, T. and Ma, Q. and Sadique, M.R. and Mokhtar, A.A. and Mustapha, M. (2022) Application of Filament Winding Technology in Composite Pressure Vessels and Challenges: A Review. Journal of Energy Storage, 49. ISSN 2352152X

Alam, M.A. and Ya, H.H. and Azeem, M. and Yusuf, M. and Soomro, I.A. and Masood, F. and Shozib, I.A. and Sapuan, S.M. and Akhter, J. (2022) Artificial Neural Network Modeling to Predict the Effect of Milling Time and TiC Content on the Crystallite Size and Lattice Strain of Al7075-TiC Composites Fabricated by Powder Metallurgy. Crystals, 12 (3). ISSN 20734352

Khan, R. and Ya, H.H. and Shah, I. and Niazi, U.M. and Ahmed, B.A. and Irfan, M. and Glowacz, A. and Pilch, Z. and Brumercik, F. and Azeem, M. and Alam, M.A. and Ahmed, T. (2022) Influence of Elbow Angle on Erosion-Corrosion of 1018 Steel for Gas�Liquid�Solid Three Phase Flow. Materials, 15 (10). ISSN 19961944

Sattar, M. and Othman, A.R. and Kamaruddin, S. and Alam, M.A. and Azeem, M. (2021) Creep parameters determination by omega model to norton bailey law by regression analysis for austenitic steel ss-304. Solid State Phenomena, 324 SS. pp. 188-197. ISSN 10120394

Sattar, M. and Othman, A.R. and Akhtar, M. and Kamaruddin, S. and Khan, R. and Masood, F. and Alam, M.A. and Azeem, M. and Mohsin, S. (2021) Curve fitting for damage evolution through regression analysis for the kachanov�rabotnov model to the norton�bailey creep law of ss-316 material. Materials, 14 (19). ISSN 19961944

Masood, F. and Nallagownden, P. and Elamvazuthi, I. and Alam, M.A. and Ali, M. and Azeem, M. (2021) Design and Optical Performance Analysis of a Quasi-stationary Compound Parabolic Concentrator for Photovoltaic Applications. Lecture Notes in Mechanical Engineering. pp. 241-248. ISSN 21954356

Alam, M.A. and Ya, H.H. and Azeem, M. and Yusuf, M. and Sapuan, S.M. and Masood, F. (2021) Investigating the effect of mixing time on the crystallite size and lattice strain of the AA7075/TiC composites Einfluss der Mischzeit auf die Kristallitgrö�e und die Gitterverzerrung von AA7075/TiC-Verbundwerkstoffen. Materialwissenschaft und Werkstofftechnik, 52 (10). pp. 1112-1120. ISSN 09335137

Attallah, O.A. and Mojicevic, M. and Garcia, E.L. and Azeem, M. and Chen, Y. and Asmawi, S. and Fournet, M.B. (2021) Macro and micro routes to high performance bioplastics: Bioplastic biodegradability and mechanical and barrier properties. Polymers, 13 (13). ISSN 20734360

Azeem, M. and Ya, H.H. and Alam, M.A. and Sultan, T.H. and Ali, M. and Sattar, M. and Ahmad, T. and Hatami, H. and Sadique, M.R. and Mokhtar, A.A. and Mustapha, M. and Khan, M.A. and Masood, F. (2021) Macroscale assessment of low-velocity impact on hybrid composite laminates Makroskalige Bewertung des Einflusses niedriger Aufprallgeschwindigkeit auf hybride Verbundlaminate. Materialwissenschaft und Werkstofftechnik, 52 (10). pp. 1101-1111. ISSN 09335137

Kaniapan, S. and Hassan, S. and Ya, H. and Nesan, K.P. and Azeem, M. (2021) The utilisation of palm oil and oil palm residues and the related challenges as a sustainable alternative in biofuel, bioenergy, and transportation sector: A review. Sustainability (Switzerland), 13 (6). ISSN 20711050

Khan, R. and Ya, H.H. and Pao, W. and Majid, M.A.A. and Ahmed, T. and Ahmad, A. and Alam, M.A. and Azeem, M. and Iftikhar, H. (2020) Effect of sand fines concentration on the erosion-corrosion mechanism of carbon steel 90� elbow pipe in slug flow. Materials, 13 (20). pp. 1-16. ISSN 19961944

Alam, M.A. and Ya, H.H. and Hussain, P.B. and Azeem, M. and Sapuan, S.M. and khan, R. and Ahamad, T. (2020) Experimental investigations on the surface hardness of synthesized polystyrene/zno nanocomposites. Lecture Notes in Mechanical Engineering. pp. 345-352. ISSN 21954356

Khan, R. and Ya, H.H. and Pao, W. and Rao, T.V.V.L.N. and Alam, A. and Azeem, M. (2020) Investigation of maximum erosion zone in the horizontal 90° elbow. Lecture Notes in Mechanical Engineering. pp. 223-230. ISSN 21954356

Alam, M.A. and Ya, H.H. and Azeem, M. and Hussain, P.B. and Salit, M.S.B. and Khan, R. and Arif, S. and Ansari, A.H. (2020) Modelling and optimisation of hardness behaviour of sintered Al/SiC composites using RSM and ANN: A comparative study. Journal of Materials Research and Technology, 9 (6). pp. 14036-14050. ISSN 22387854

Conference or Workshop Item

Alam, M.A. and Ya, H.H. and Gerewal, L. and Azeem, M. and Masood, F. and Yusuf, M. and Ahmad, T. and Khan, M.R. and Shozib, I.A. (2024) Evaluation on the impact behavior of stir-casted Aluminum composites reinforced with SiC and Gr for lightweight applications. In: UNSPECIFIED.

Ali, M. and Masood, F. and Khan, M.I. and Azeem, M. and Qasim, M. and Ali, F.N. (2021) Evaluation of flexible pavement distresses-A Case Study of Northern Bypass Peshawar, Pakistan. In: UNSPECIFIED.

Alam, M.A. and Ya, H.H. and Ahmad, A. and Yusuf, M. and Azeem, M. and Masood, F. (2021) Influence of aluminum addition on the mechanical properties of brass/Al composites fabricated by stir casting. In: UNSPECIFIED.

Raheem, A. and Khan, R. and Mazhar, A.R. and Ya, H.H. and Alam, M.A. and Ahmed, T. and Azeem, M. (2021) A Review of Recent Studies of Dynamometers for Cutting Force Measurement in Machining Processes. In: UNSPECIFIED.

Book

Farhan, M. and Mastura, M.T. and Ansari, S.P. and Muaz, M. and Azeem, M. and Sapuan, S.M. (2022) Advanced Potential Hybrid Biocomposites in Aerospace Applications: A Comprehensive Review. Springer International Publishing, pp. 127-148. ISBN 9783030881924; 9783030881917

Alam, M.A. and Sapuan, S.M. and Ya, H.H. and Hussain, P.B. and Azeem, M. and Ilyas, R.A. (2020) Application of biocomposites in automotive components: A review. Elsevier, pp. 1-17. ISBN 9780128205594