Article

Ali, A.M. and Azeem, B. and Alghamdi, A.M. and Shahzad, K. and Al-Zahrani, A.A. and Rashid, M.I. and Mahpudz, A.B. and Jamil, A. (2023) Optimization of Fluidized-Bed Process Parameters for Coating Uniformity and Nutrient-Release Characteristics of Controlled-Release Urea Produced by Modified Lignocellulosic Coating Material. Agronomy, 13 (3).

Jamil, A. and Rafiq, S. and Iqbal, T. and Khan, H.A.A. and Khan, H.M. and Azeem, B. and Mustafa, M.Z. and Hanbazazah, A.S. (2022) Current status and future perspectives of proton exchange membranes for hydrogen fuel cells. Chemosphere, 303. ISSN 00456535

Azeem, B. and Elboughdiri, N. and KuShaari, K.Z. and Jamoussi, B. and Ghernaout, D. and Ghareba, S. and Raza, S. and Gasmi, A. (2022) Valorization of almond shells� lignocellulosic microparticles for controlled release urea production: interactive effect of process parameters on longevity and kinetics of nutrient release. Journal of Coatings Technology and Research, 19 (2). pp. 643-660. ISSN 15470091

Irfan, S.A. and Irshad, K. and Algahtani, A. and Azeem, B. and Tirth, V. and Algarni, S. and Islam, S. and Abdelmohimen, M.A.H. (2021) Machine learning-based modeling of thermoelectric materials and air-cooling system developed for a humid environment. Materials Express, 11 (2). pp. 153-165. ISSN 21585849

Latif, A.A.A. and Lau, K.K. and Low, S.C. and Azeem, B. (2021) Multicomponent spiral wound membrane separation model for co2 removal from natural gas. Membranes, 11 (9). ISSN 20770375

Irfan, S.A. and Azeem, B. and Irshad, K. and Algarni, S. and Kushaari, K. and Islam, S. and Abdelmohimen, M.A.H. (2020) Machine learning model for nutrient release from biopolymers coated controlled-release fertilizer. Agriculture (Switzerland), 10 (11). pp. 1-13. ISSN 20770472

Azeem, B. and KuShaari, K. and Naqvi, M. and Keong, L.K. and Almesfer, M.K. and Al-Qodah, Z. and Naqvi, S.R. and Elboughdiri, N. (2020) Production and characterization of controlled release urea using biopolymer and geopolymer as coating materials. Polymers, 12 (2). ISSN 20734360

Mohd Laziz, A. and KuShaari, K. and Azeem, B. and Yusup, S. and Chin, J. and Denecke, J. (2020) Rapid production of biodiesel in a microchannel reactor at room temperature by enhancement of mixing behaviour in methanol phase using volume of fluid model. Chemical Engineering Science, 219. ISSN 00092509

Shafiq, U. and Shariff, A.M. and Babar, M. and Azeem, B. and Ali, A. and Bustam, A. (2020) Study of CO2 Solid Formation During Blowdown of Cryogenic CO2�CH4 Distillation Process. Lecture Notes in Mechanical Engineering. pp. 23-31. ISSN 21954356

Shafiq, U. and Shariff, A.M. and Babar, M. and Azeem, B. and Ali, A. and Bustam, A. (2020) Study of dry ice formation during blowdown of CO�-CH� from cryogenic distillation column. Journal of Loss Prevention in the Process Industries, 64. ISSN 09504230

Shafiq, U. and Shariff, A.M. and Babar, M. and Azeem, B. and Ali, A. and Bustam, M.A. (2020) A review on modeling and simulation of blowdown from pressurized vessels and pipelines. Process Safety and Environmental Protection, 133. pp. 104-123. ISSN 09575820

Zhalehrajabi, E. and Lau, K.K. and Shaari, K.Z.K. and Zahraee, S.M. and Seyedin, S.H. and Azeem, B. and Shaaban, A. (2019) Effect of biodegradable binder properties and operating conditions on growth of urea particles in a fluidized bed granulator. Materials, 12 (14). ISSN 19961944

Azeem, B. and KuShaari, K. and Man, Z. and Trinh, T.H. (2018) Effect of fluidized-bed process variables on controlled-release of nitrogen and coating. Brazilian Journal of Chemical Engineering, 35 (2). pp. 587-603. ISSN 01046632

Basit, A. and Kushaari, K. and Siwayanan, P. and Azeem, B. (2018) Effect of process parameters on droplet spreading behaviour over porous surface. Canadian Journal of Chemical Engineering, 96 (1). pp. 352-359. ISSN 00084034

Azeem, B. and KuShaari, K. and Man, Z. and Irfan, S.A. (2018) Parametric study of tumbling fluidized bed to evaluate nitrogen release characteristics of biopolymer-coated controlled release urea. Chemical Engineering Communications, 205 (10). pp. 1397-1414. ISSN 00986445

Basit, A. and Siwayanan, P. and KuShaari, K. and Keong, L.K. and Azeem, B. (2018) An investigation on dissolutive wetting of porous urea surface. Canadian Journal of Chemical Engineering, 96 (12). pp. 2690-2699. ISSN 00084034

Irfan, S.A. and Razali, R. and KuShaari, K. and Mansor, N. and Azeem, B. and Ford Versypt, A.N. (2018) A review of mathematical modeling and simulation of controlled-release fertilizers. Journal of Controlled Release, 271. pp. 45-54. ISSN 01683659

Azeem, B. and KuShaari, K. and Man, Z. and Trinh, T.H. (2017) Nutrient release characteristics and coating homogeneity of biopolymer coated urea as a function of fluidized bed process variables. Canadian Journal of Chemical Engineering, 95 (5). pp. 849-862. ISSN 00084034

Azeem, B. and KuShaari, K. and Man, Z. and Irfan, S.A. and Trinh, T.H. (2017) Tumbling fluidized-bed process parameters affecting quality of biopolymer coating on surface of pristine urea particles. Powder Technology, 320. pp. 714-725. ISSN 00325910

Trinh, T.H. and Kushaari, K. and Shuib, A.S. and Ismail, L. and Azeem, B. (2015) Modelling the release of nitrogen from controlled release fertiliser: Constant and decay release. Biosystems Engineering, 130. pp. 34-42. ISSN 15375110

Trinh, T.H. and KuShaari, K. and Shuib, A.S. and Bin Ismail, L. and Basit, A. and Azeem, B. (2014) Modeling the release of urea from coated urea: The constant release stage. Advanced Materials Research, 970. pp. 166-171. ISSN 10226680

Azeem, B. and Kushaari, K. and Man, Z. and Subbarao, D. (2014) Recent advancements on superabsorbent polymers to produce controlled release urea (short review). Applied Mechanics and Materials, 625. pp. 761-765. ISSN 16609336

Azeem, B. and Kushaari, K. and Man, Z.B. and Basit, A. and Thanh, T.H. (2014) Review on materials & methods to produce controlled release coated urea fertilizer. Journal of Controlled Release, 181 (1). pp. 11-21. ISSN 01683659

Conference or Workshop Item

Irfan, S.A. and Razali, R. and Kushaari, K. and Mansor, N. and Azeem, B. (2017) Analytical solution of diffusion model for nutrient release from controlled release fertilizer. In: UNSPECIFIED.

Azeem, B. and KuShaari, K. and Man, Z. (2016) Effect of Coating Thickness on Release Characteristics of Controlled Release Urea Produced in Fluidized Bed Using Waterborne Starch Biopolymer as Coating Material. In: UNSPECIFIED.