Article

Marode, R.V. and Awang, M. and Lemma, T.A. and Pedapati, S.R. and Hassan, A. and Janga, V.S.R. and Alam, M.A. and Loyte, A. and Devarajan, Y. (2024) Friction stir processing of AZ91 hybrid composites with exfoliated multi-layered graphene: A Taguchi-Grey relational analysis. Journal of Alloys and Compounds, 972.

Hassan, A. and Altaf, K. and Awang, M. and Pedapati, S.R. and Ahmed, N. and Marode, R.V. (2024) Multi-objective optimization of friction stir additively manufactured Al-7075 multi-layered laminates. Journal of Alloys and Compounds, 993.

Marode, R.V. and Awang, M. and Lemma, T.A. and Pedapati, S.R. and Hassan, A. and Janga, V.S.R. (2024) Numerical analysis of temperature and material flow predictions with defects in the friction stir processing of AZ91 alloy: An advanced meshfree SPH technique. Engineering Analysis with Boundary Elements, 161. pp. 48-69.

Hassan, A. and Pedapati, S.R. and Awang, M. and Soomro, I.A. (2023) A Comprehensive Review of Friction Stir Additive Manufacturing (FSAM) of Non-Ferrous Alloys. Materials, 16 (7).

Marode, R.V. and Awang, M. and Janga, V.S.R. (2023) Computational Modelling and Comparative Analysis of Friction Stir Welding and Stationary Shoulder Friction Stir Welding on AA6061. Crystals, 13 (9).

Janga, V.S.R. and Awang, M. and Sallih, N. and Mun, C.R. and Wee, E.B. (2023) Computational analysis of thermo-mechanical characteristics in refill FSSW of thin AA7075-T6 sheets using smoothed-particle hydrodynamics. Computational Particle Mechanics.

Soomro, I.A. and Pedapati, S.R. and Awang, M. and Alam, M.A. (2023) Effects of double pulse welding on microstructure, texture, and fatigue behavior of DP590 steel resistance spot weld. International Journal of Advanced Manufacturing Technology, 125 (3-4). pp. 1271-1287.

Hassan, A. and Awang, M. and Pedapati, S.R. and Altaf, K. and Marode, R.V. and Ahmed, S.W. (2023) Experimental investigation on tool pin profile for defect-free multi-layered laminates using friction stir additive manufacturing. Results in Engineering, 20.

Hassan, A. and Awang, M. and Pedapati, S.R. and Altaf, K. and Ahmed, N. and Marode, R.V. and Ahmed, S.W. and Soomro, I.A. (2023) Investigation on Surface Hardness and Microstructure Evolution in AA 7075-T651 Multi-Layered Laminate Fabricated Through Friction Stir Additive Manufacturing. Iranian Journal of Materials Science and Engineering, 20 (4). ISSN 17350808

Paramananthan, N.K.N. and Lemma, T.A. and Awang, M. and Hidayat, M.I.P. (2023) Numerical Investigation of PDC Cutter�Rock Interaction in Drilling Operation Using SPH. Lecture Notes in Mechanical Engineering. pp. 761-786.

Janga, V.S.R. and Awang, M. and Pedapati, S.R. (2023) A Numerical Study on the Effect of Tool Speeds on Temperatures and Material Flow Behaviour in Refill Friction Stir Spot Welding of Thin AA7075-T6 Sheets. Materials, 16 (8).

Nia, E.M. and Ling, L. and Awang, M. and Emamian, S.S. (2023) Preface. Lecture Notes in Civil Engineering, 310. v. ISSN 23662557

Emamian, S.S. and Awang, M. and Razak, J.A. and Masset, P.J. (2023) Preface. Lecture Notes in Mechanical Engineering. ISSN 21954356

Janga, V.S.R. and Awang, M. (2023) The influence of coefficient of friction in thermal prediction of refill friction stir spot welding process of AA7075-T6: Einfluss des Reibungskoeffizienten auf die thermische Abschätzung des Nachfüllreibungs-Rührreibpunktschwei�prozesses von AA7075-T6. Materialwissenschaft und Werkstofftechnik, 54 (9). pp. 1068-1074. ISSN 09335137

Marode, R.V. and Pedapati, S.R. and Lemma, T.A. and Awang, M. (2023) A review on numerical modelling techniques in friction stir processing: current and future perspective. Archives of Civil and Mechanical Engineering, 23 (3). ISSN 16449665

Janga, V.S.R. and Awang, M. (2022) Influence of Plunge Depth on Temperatures and Material Flow Behavior in Refill Friction Stir Spot Welding of thin AA7075-T6 Sheets: A Numerical Study. Metals, 12 (6). ISSN 20754701

Meyghani, B. and Awang, M. (2022) The Influence of the Tool Tilt Angle on the Heat Generation and the Material Behavior in Friction Stir Welding (FSW). Metals, 12 (11). ISSN 20754701

Ahmad, K. and Awang, M. and Pedapati, S.R. and Abu Bakar, A. and Mukhtar, Z.Z. (2022) Numerical Simulation of Heat Generation During Plunging Stage in Orbital Friction Stir Welding on Pipe Aluminum Alloys AA6061-T6 Adapting a Pure Lagrangian Formulation. Advanced Structured Materials, 167. pp. 453-464. ISSN 18698433

Soomro, I.A. and Pedapati, S.R. and Awang, M. and Soomro, A.A. and Alam, M.A. and Bhayo, B.A. (2022) Optimization and Modelling of Resistance Spot Welding Process Parameters for Quality Improvement Using Taguchi Method and Artificial Neural Network. Iranian Journal of Materials Science and Engineering, 19 (4). pp. 1-10. ISSN 17350808

Awang, M. and Ling, L. and Emamian, S.S. (2022) Preface. Lecture Notes in Civil Engineering, 223. v. ISSN 23662557

Yola, L. and Nangkula, U. and Ayegbusi, O.G. and Awang, M. (2022) Preface. Lecture Notes in Civil Engineering, 161. v. ISSN 23662557

Soomro, I.A. and Pedapati, S.R. and Awang, M. (2022) Publisher Correction to: A review of advances in resistance spot welding of automotive sheet steels: emerging methods to improve joint mechanical performance (The International Journal of Advanced Manufacturing Technology, (2022), 118, 5-6, (1335-1366), 10.1007/s00170-021-08002-5). International Journal of Advanced Manufacturing Technology, 119 (9-10). p. 6875. ISSN 02683768

Soomro, I.A. and Pedapati, S.R. and Awang, M. (2022) A review of advances in resistance spot welding of automotive sheet steels: emerging methods to improve joint mechanical performance. International Journal of Advanced Manufacturing Technology, 118 (5-6). pp. 1335-1366. ISSN 02683768

Soomro, I.A. and Pedapati, S.R. and Awang, M. (2021) Double pulse resistance spot welding of dual phase steel: Parametric study on microstructure, failure mode and low dynamic tensile shear properties. Materials, 14 (4). pp. 1-19. ISSN 19961944

Razak, M.A.A.A. and Ismail, A. and Rahman, F.A. and Baharudin, B.A. and Khalili, M.A. and Rahim, M.Y.M. and Awang, M. (2021) Experimental Study on Self-Supported Friction Stir Welding on AA5083 Plate Butt Joints. Advanced Structured Materials, 147. pp. 293-298. ISSN 18698433

Janga, V.S.R. and Awang, M. and Yamin, M.F. and Suhuddin, U.F.H. and Klusemann, B. and Dos Santos, J.F. (2021) Experimental and numerical analysis of refill friction stir spot welding of thin AA7075-T6 sheets. Materials, 14 (23). ISSN 19961944

Soomro, I.A. and Pedapati, S.R. and Awang, M. (2021) Influence of in situ postweld heat treatment on microstructure and failure behavior of dual-phase steel resistance spot weld. International Journal of Advanced Manufacturing Technology, 114 (11-12). pp. 3739-3750. ISSN 02683768

Meyghani, B. and Awang, M. and Emamian, S.S. (2021) Introducing an Enhanced Friction Model for Developing Inertia Welding Simulation: A Computational Solid Mechanics Approach. International Journal of Engineering, Transactions A: Basics, 34 (3). pp. 737-743. ISSN 17281431

Lotpy, M.A.M.N. and Ismail, A. and Rahman, F.A. and Puteri Zarina, M.K. and Baharudin, B.A. and Awang, M. and Hamid, D.A. (2021) Optimization of Welding Parameters for Self-Support Friction Stir Welding (SS-FSW) on AA6063 Pipe Joints. Advanced Structured Materials, 147. pp. 299-306. ISSN 18698433

Soomro, I.A. and Pedapati, S.R. and Awang, M. (2021) Optimization of postweld tempering pulse parameters for maximum load bearing and failure energy absorption in dual phase (DP590) steel resistance spot welds. Materials Science and Engineering: A, 803. ISSN 09215093

Bin Meor Razali, A.M.M.F. and Awang, M. and Emamian, S.S. (2021) Preface. Lecture Notes in Civil Engineering, 139 LN. ISSN 23662557

Rao, T.V.V.L.N. and Rani, A.M.A. and Mohamed, N.M. and Ya, H.H. and Awang, M. and Hashim, F.M. (2021) Stability Analysis of Partial Slip Texture Journal Bearing. Lecture Notes in Mechanical Engineering. pp. 217-225. ISSN 21954356

Chitturi, V. and Pedapati, S.R. and Awang, M. (2020) Challenges in dissimilar friction stir welding of aluminum 5052 and 304 stainless steel alloys Herausforderungen beim artfremden Reibrührschwei�en von Aluminiumlegierungen 5052 und 304 rostfreiem Stahl. Materialwissenschaft und Werkstofftechnik, 51 (6). pp. 811-816. ISSN 09335137

Meyghani, B. and Awang, M. (2020) A Comparison Between the Flat and the Curved Friction Stir Welding (FSW) Thermomechanical Behaviour. Archives of Computational Methods in Engineering, 27 (2). pp. 563-576. ISSN 11343060

Meyghani, B. and Awang, M. (2020) Developing a Finite Element Model for Thermal Analysis of Friction Stir Welding (FSW) Using Hyperworks. Lecture Notes in Mechanical Engineering. pp. 619-628. ISSN 21954356

Paramaguru, D. and Pedapati, S.R. and Awang, M. and Mohebbi, H. and Sharma, K.V. (2020) Effect of process parameters on mechanical properties of AA5052 joints using underwater friction stir welding. Journal of Mechanical Engineering and Sciences, 14 (1). pp. 6259-6271. ISSN 22894659

Meyghani, B. and Awang, M. and Wu, C.S. (2020) Finite element modeling of friction stir welding (FSW) on a complex curved plate. Journal of Advanced Joining Processes, 1. ISSN 26663309

Meyghani, B. and Emamian, S. and Awang, M. and Wu, C.S. (2020) Finite element modeling of nano porous sintered silver material. Lecture Notes in Mechanical Engineering. pp. 55-67. ISSN 21954356

Ismail, A. and Awang, M. and Zuhir, M.S.M. and Rahman, F.A. and Baharudin, B.A. and Puteri Zarina, M.K. and Hamid, D.A. and Rojan, M.A. and Dahalan, W.M. (2020) Friction Stir Welding on AA5083 Tee Joint in 1F Position. Lecture Notes in Mechanical Engineering. pp. 351-360. ISSN 21954356

Emamian, S.S. and Awang, M. and Yusof, F. and Sheikholeslam, M. and Mehrpouya, M. (2020) Improving the friction stir welding tool life for joining the metal matrix composites. International Journal of Advanced Manufacturing Technology, 106 (7-8). pp. 3217-3227. ISSN 02683768

Chitturi, V. and Pedapati, S.R. and Awang, M. (2020) Investigation of weld zone and fracture surface of friction stir lap welded 5052 aluminum alloy and 304 stainless steel joints. Coatings, 10 (11). pp. 1-15. ISSN 20796412

Yamin, M.F. and Awang, M. and Suhuddin, U.F.H. and Sallih, N. and Klusemann, B. and dos Santos, J.F. (2020) Mechanical performance optimization of similar thin AA 7075-T6 sheets produced by refill friction stir spot welding Optimierung der mechanischen Leistungfähigkeit für artgleich produzierte AA 7075-T6-Bleche durch Rühr-Reib-Punkt-Schwei�en. Materialwissenschaft und Werkstofftechnik, 51 (6). pp. 830-835. ISSN 09335137

Awang, M. and Fared, M.R.M.M. (2020) Preface. Lecture Notes in Civil Engineering, 59. v. ISSN 23662557

Rao, T.V.V.L.N. and A Rani, A.M. and Mohamed, N.M. and Ya, H.H. and Awang, M. and M Hashim, F. (2020) Static and stability analysis of partial slip texture multi-lobe journal bearings. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 234 (4). pp. 567-587. ISSN 13506501

Meyghani, B. and Awang, M. and Wu, C.S. and Emamian, S. (2020) Temperature distribution investigation during friction stir welding (fsw) using smoothed-particle hydrodynamics (sph). Lecture Notes in Mechanical Engineering. pp. 749-761. ISSN 21954356

Awang, M. and Khalili, A.A. and Pedapati, S.R. (2020) A review: Thin protective coating for wear protection in high-temperature application. Metals, 10 (1). ISSN 20754701

Rao, T.V.V.L.N. and Rani, A.M.A. and Mohamed, N.M. and Ya, H.H. and Awang, M. and Hashim, F.M. (2019) Analysis of magnetohydrodynamic partial slip laser bump texture slider and journal bearing. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 233 (12). pp. 1921-1938. ISSN 13506501

Yaqoob, B. and Pasha, R.A. and Awang, M. and Nasir, M.A. and Hussain, A. and Nazir, K. (2019) Comparison of Mixing Strategies and Hybrid Ratio Optimization for Mechanical Properties Enhancement of Al-CeO2-GNP�s Metal Matrix Composite Fabricated by Friction Stir Processing. Metallography, Microstructure, and Analysis, 8 (4). pp. 534-544. ISSN 21929262

Emamian, S. and Awang, M. and Yusof, F. and Hussain, P. and Meyghani, B. and Zafar, A. (2019) The Effect of Pin Profiles and Process Parameters on Temperature and Tensile Strength in Friction Stir Welding of AL6061 Alloy. Lecture Notes in Mechanical Engineering. pp. 15-37. ISSN 21954356

Chitturi, V. and Pedapati, S.R. and Awang, M. (2019) Effect of tilt angle and pin depth on dissimilar friction stir lap welded joints of aluminum and steel alloys. Materials, 12 (23). ISSN 19961944

Meyghani, B. and Awang, M. and Bokam, P. and Plank, B. and Heinzl, C. and Siow, K.S. (2019) Finite element modeling of nano porous sintered silver material using computed tomography images Finite-Elemente-Modellierung von nano-porösem gesinterten Silber unter Verwendung von Computertomographiebildern. Materialwissenschaft und Werkstofftechnik, 50 (5). pp. 533-538. ISSN 09335137

Paramaguru, D. and Pedapati, S.R. and Awang, M. (2019) A Review on Underwater Friction Stir Welding (UFSW). Lecture Notes in Mechanical Engineering. pp. 71-83. ISSN 21954356

Meyghani, B. and Awang, M. and Emamian, S. and Plank, B. and Christoph, H. and Siow, K.S. (2019) Stress analysis of nano porous material using computed tomography images Spannungsanalyse von nanoporösem Material mittels Computertomographie-Aufnahmen. Materialwissenschaft und Werkstofftechnik, 50 (3). pp. 234-239. ISSN 09335137

Meyghani, B. and Awang, M. and Emamian, S. and Mohd Nor, M.K.B. (2019) Thermal Modelling of Friction Stir Welding (FSW) Using Calculated Young�s Modulus Values. Lecture Notes in Mechanical Engineering. pp. 1-13. ISSN 21954356

Ismail, A. and Awang, M. and Rahman, F.A. and Baharudin, B.A. and Khalid, P.Z.M. and Hamid, D.A. (2018) Evaluation of the hardness distribution and fracture location in friction stir welded AA6063 pipe butt joints. Advanced Structured Materials, 85. pp. 439-444. ISSN 18698433

Lias, M.R. and Awang, M. and Talib, M.N. and Senawi, A.R. and Samad, M.A. (2018) Investigation of axial misalignment effects to the gear tooth strength properties using FEM model. Journal of Mechanical Engineering and Sciences, 12 (2). pp. 3581-3592. ISSN 22894659

Hanamertani, A.S. and Pilus, R.M. and Manan, N.A. and Ahmed, S. and Awang, M. (2018) Ionic Liquid Application in Surfactant Foam Stabilization for Gas Mobility Control. Energy and Fuels, 32 (6). pp. 6545-6556. ISSN 08870624

Ismail, A. and Awang, M. and Rahman, F.A. and Baharudin, B.A. and Khalid, P.Z.M. and Hamid, D.A. and Ahmad, K. (2018) The mapping of full weld cycle heat profile for friction stir welding pipe butt joints. Advanced Structured Materials, 85. pp. 461-467. ISSN 18698433

Emamian, S. and Hussain, P. and Awang, M. and Arumugam, T. and Yusof, F. and Saheed, M.S.M. and Mohamed, N.M. (2017) Comparison of carbon-based nanomaterials characteristics on H13 tool steel: Vergleich der Eigenschaften Kohlenstoff-basierter Nanomaterialien auf H13 Werkzeugstahl. Materialwissenschaft und Werkstofftechnik, 48 (3). pp. 198-204. ISSN 09335137

Meyghani, B. and Awang, M. and Emamian, S. and Khalid, N.M. (2017) Developing a finite element model for thermal analysis of friction stir welding by calculating temperature dependent friction coefficient. Lecture Notes in Mechanical Engineering. pp. 107-126. ISSN 21954356

Pedapati, S.R. and Sidiq, A.B. and Awang, M. and Hashim, F.M. and Jebaraj, S. (2017) Effect of bevel angles on tensile strength of SS304 steel weld joints. Lecture Notes in Mechanical Engineering. pp. 95-106. ISSN 21954356

Zafar, A. and Awang, M. and Khan, S.R. (2017) Friction stir welding of polymers: An overview. Lecture Notes in Mechanical Engineering. pp. 19-36. ISSN 21954356

Hussein, S.A. and Tahir, A.S.M. and Awang, M. (2017) On amorphous phase formation in dissimilar friction stir welding of aluminum to steel. Lecture Notes in Mechanical Engineering. pp. 69-81. ISSN 21954356

Lias, M.R. and Sharif, Z. and Awang, M. and Jailani, A. and Warap, H. (2017) Quasi-static modeling of spur gear time varying strength analysis. ARPN Journal of Engineering and Applied Sciences, 12 (6). pp. 1938-1947. ISSN 18196608

Rao, T.V.V.L.N. and Rani, A.M.A. and Awang, M. and Hashim, F.M. (2017) Stability evaluation of three-layered journal bearing with slip/partial slip. Industrial Lubrication and Tribology, 69 (3). pp. 334-341. ISSN 00368792

Meyghani, B. and Awang, M. and Emamian, S. (2017) A mathematical formulation for calculating temperature dependent friction coefficient values: Application in friction stir welding (FSW). Defect and Diffusion Forum, 379. pp. 73-82. ISSN 10120386

Emamian, S. and Awang, M. and Yusof, F. and Hussain, P. and Mehrpouya, M. and Kakooei, S. and Moayedfar, M. and Zafar, A. (2017) A review of friction stir welding pin profile. Lecture Notes in Mechanical Engineering. pp. 1-18. ISSN 21954356

Soleimani, H. and Yahya, N. and Baig, M.K. and Khodapanah, L. and Sabet, M. and Bhat, A.H. and �chsner, A. and Awang, M. (2016) Catalytic effect of zinc oxide nanoparticles on oil-water interfacial tension. Digest Journal of Nanomaterials and Biostructures, 11 (1). pp. 263-269. ISSN 18423582

Awang, M. and Mohammadpour, E. and Muhammad, I.D. (2016) Effect of Geometrical Parameters on Tensile Properties of Nanotubes. Engineering Materials. pp. 133-155. ISSN 16121317

Ahmad, I. and Awang, M. and Sufian, S. and Irfan Khan, M. and Mumtazb, M. (2016) Effect of ball milling of fly ash particle size on foam stabilization for EOR applications. Jurnal Teknologi, 78 (6-7). pp. 115-119. ISSN 01279696

Hamdi, Z. and Awang, M. (2016) Effect of low temperature CO2 injection in high temperature oil reservoirs using slimtube experiment. Jurnal Teknologi, 78 (6-6). pp. 35-39. ISSN 01279696

Awang, M. and Ismail, A. and Zaman, M.A.K. (2016) Effect of process parameters on the strength of swept friction stir spot welded plates. Advanced Structured Materials, 61. pp. 105-110. ISSN 18698433

Ibrahim, N.-N.M.D. and Awang, M. and Hussain, P. (2016) Effect of thickness on residual stress in joining sialon to AISI 420. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 4191-4196. ISSN 18196608

Srinivasa Rao, P. and Bawazir, A.F.O. and Awang, M. and Rani, A.M.A. and Jebaraj, S. (2016) Effect of tool geometrical parameters on friction stir welding joint properties of aluminum alloy AA6061. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13053-13058. ISSN 18196608

Awang, M. and Mohammadpour, E. and Muhammad, I.D. (2016) Finite Element Analysis of Multi-walled Nanotubes. Engineering Materials. pp. 157-163. ISSN 16121317

Awang, M. and Mohammadpour, E. and Muhammad, I.D. (2016) Finite Element Modeling of Nanotubes. Engineering Materials. pp. 27-46. ISSN 16121317

Awang, M. and Mohammadpour, E. and Muhammad, I.D. (2016) Influence of Defects on the Strength of Graphene and Carbon Nanotube. Engineering Materials. pp. 165-173. ISSN 16121317

Emamian, S. and Awang, M. and Hussai, P. and Meyghani, B. and Zafar, A. (2016) Influences of tool pin profile on the friction stir welding of AA6061. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12258-12261. ISSN 18196608

Awang, M. and Mohammadpour, E. and Muhammad, I.D. (2016) Interatomic Bonding. Engineering Materials. pp. 15-25. ISSN 16121317

Zafar, A. and Awang, M. and Khan, S.R. and Emamian, S. (2016) Investigating friction stir welding on thick nylon 6 plates. Welding Journal, 95 (6). 210s-218s. ISSN 00432296

Awang, M. and Mohammadpour, E. and Muhammad, I.D. (2016) Linear Finite Element Analysis of Nanotubes. Engineering Materials. pp. 63-106. ISSN 16121317

Rao, T.V.V.L.N. and Rani, A.M.A. and Awang, M. and Hashim, F.M. (2016) Load capacity coefficient evaluation of three-layered journal bearing with slip. Jurnal Teknologi, 78 (6-10). pp. 39-43. ISSN 01279696

Awang, M. and Mohammadpour, E. and Muhammad, I.D. (2016) Mechanical Behavior of Carbon Nanotube-Reinforced Polymer Composites. Engineering Materials. pp. 175-212. ISSN 16121317

Muhammad, I.D. and Awang, M. (2016) Modeling the bending behavior of single-walled cubic zirconia nanotubes. Journal of Nano Research, 38. pp. 88-95. ISSN 16625250

Moradi, B. and Ayoub, M. and Awang, M. (2016) Modification of Ramey's model for carbon dioxide injection in the vicinity of critical point. Journal of CO2 Utilization, 16. pp. 218-224. ISSN 22129820

Awang, M. and Mohammadpour, E. and Muhammad, I.D. (2016) Nanotube Modeling Using Beam Element. Engineering Materials. pp. 47-61. ISSN 16121317

Awang, M. and Mohammadpour, E. and Muhammad, I.D. (2016) Nanotubes. Engineering Materials. pp. 1-13. ISSN 16121317

Awang, M. and Mohammadpour, E. and Muhammad, I.D. (2016) Non-linear Finite Element Analysis of Nanotubes. Engineering Materials. pp. 107-131. ISSN 16121317

Noor, N.F.M. and Awang, M. (2016) Overview of underwater friction stir welding. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14319-14321. ISSN 18196608

Zafar, A. and Awang, M. and Khan, S.R. and Emamian, S. (2016) Role of pin profile on material flow during friction stir welding of nylon-6. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13309-13312. ISSN 18196608

Rao, T.V.V.L.N. and Rani, A.M.A. and Awang, M. and Nagarajan, T. and Hashim, F.M. (2016) Stability analysis of double porous and surface porous layer journal bearing. Tribology - Materials, Surfaces and Interfaces, 10 (1). pp. 19-25. ISSN 17515831

Ismail, A. and Awang, M. and Hamid, D.A. and Ab Rahman, F. and Khalid, P.Z.M. (2016) Temperature profile and fracture location of friction stir welded AA6063-T6 pipe butt joint. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13305-13308. ISSN 18196608

Zafar, A. and Awang, M. and Khan, S.R. and Emamian, S. (2016) Visual analysis of material flow during friction stir welding of nylon-6. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 4186-4190. ISSN 18196608

Ismail, A. and Awang, M. and Rojan, M.A. and Samsudin, S.H. (2016) The characteristic of temperature curves for friction stir welding of aluminium alloy 6063-T6 pipe during tool plunging stage. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 277-280. ISSN 18196608

Meyghani, B. and Awang, M. and Emamian, S. (2016) A comparative study of finite element analysis for friction stir welding application. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12984-12989. ISSN 18196608

Ismail, A. and Awang, M. and Samsudin, S.H. and Rojan, M.A. and Jasri, M.A.H.M. (2016) The hardness variation due to secondary heating in friction stir welding of small diameter aluminium alloy 6063 pipe. Advanced Structured Materials, 61. pp. 87-94. ISSN 18698433

Ikram, I.M. and Ismail, A. and Zakaria, A. and Awang, M. and Rojan, M.A. and Hamid, D.A. and Makhtar, M.F. and Said, M.T.S.M. (2016) A preliminary experimental study of underwater Friction Stir Welding AA5083 plate butt joint. Journal of Environmental Science and Technology, 9 (6). pp. 462-466. ISSN 19947887

Shaari, K.Z.K. and Awang, M. (2015) Engineering applications of computational fluid dynamics. Advanced Structured Materials, 44. ISSN 18698433

Muhammad, I.D. and Awang, M. and Mamat, O. and Shaari, K.Z.K. (2015) Estimating young's modulus of single-walled zirconia nanotubes using nonlinear finite element modeling. Journal of Nanomaterials, 2015. ISSN 16874110

Ganesan, T. and Awang, M. (2015) Large eddy simulation (LES) for steady-state turbulent flow prediction. Advanced Structured Materials, 44. pp. 17-32. ISSN 18698433

Awang, M. and Raza, S.K. and Yahaya, M.S.A. (2015) Microstructure and hardness investigation of different welding passes in weld zones. Materialwissenschaft und Werkstofftechnik, 46 (4-5). pp. 492-497. ISSN 09335137

Muhammad, I.D. and Awang, M. and Seng, L.K. (2015) Numerical modelling of Young�s modulus of single-layered cubic zirconia nanosheets. Advanced Structured Materials, 70. pp. 373-380. ISSN 18698433

Ismail, A. and Awang, M. and Samsudin, S.H. (2015) The influence of process parameters on the temperature profile of friction stir welded aluminium alloy 6063-T6 pipe butt joint. Advanced Structured Materials, 70. pp. 243-249. ISSN 18698433

Hamdi, Z. and Awang, M. (2014) CO2 minimum miscibility pressure determination of pure hydrocarbons in different temperatures using slimtube simulations. Research Journal of Applied Sciences, Engineering and Technology, 7 (15). pp. 3159-3163. ISSN 20407459

Ibrahim, N.N.M. and Hussain, P. and Awang, M. (2014) Effect of nitriding on reaction layer of diffusion bonded sialon to AISI 420 martensitic stainless steel. Applied Mechanics and Materials, 660. pp. 178-184. ISSN 16609336

Moradi, B. and Awang, M. and Bashir, A. and Sabil, K.M. (2014) Effects of alcohols on interfacial tension between carbon dioxide and crude oil at elevated pressures and temperature. Journal of Petroleum Science and Engineering, 121. pp. 103-109. ISSN 09204105

Abunowara, M. and Eldemerdash, U. and Awang, M. and Mady, H. (2014) Evaluation of carbon dioxide adsorption on Malaysian coals for potential sequestration. Applied Mechanics and Materials, 625. pp. 184-187. ISSN 16609336

Lias, M.R. and Awang, M. and Rao, T.V.V.L.N. and Fadhil, M. (2014) Evaluation of spur gear pair on tooth root bending stress in yawing misalignment contactcondition. Advanced Materials Research, 980. pp. 97-101. ISSN 10226680

Hamdi, Z. and Awang, M. (2014) Introducing new slug size method in water alternating CO2 for enhanced oil recovery. Research Journal of Applied Sciences, Engineering and Technology, 8 (10). pp. 1239-1243. ISSN 20407459

Mohammadpour, E. and Awang, M. (2014) Investigation of carbon nanotube defects on its strength using nonlinear finite element modeling. Advanced Structured Materials, 54. pp. 383-390. ISSN 18698433

Ibrahim, N.N.M. and Hussain, P. and Awang, M. (2014) Microstructure and hardness of diffusion bonded sialon-AISI 420 martensitic stainless steel. Advanced Materials Research, 974. pp. 199-204. ISSN 10226680

Mohammadpour, E. and Awang, M. and Kakooei, S. and Akil, H.M. (2014) Modeling the tensile stress-strain response of carbon nanotube/polypropylene nanocomposites using nonlinear representative volume element. Materials and Design, 58. pp. 36-42. ISSN 02613069

Muhammad, I.D. and Awang, M. and Mamat, O. (2014) Modelling the elastic constants of cubic zirconia using molecular dynamics simulations. Advanced Materials Research, 845. pp. 387-391. ISSN 10226680

Mohammadpour, E. and Awang, M. (2014) Nonlinear multi-scale finite element method to predict tensile behavior of carbon nanotube-reinforced polymer composites. Journal of Nano Research, 26. pp. 169-176. ISSN 16625250

Akbar, A.R. and Awang, M. (2014) Performance prediction of inertial auto-reinforce magnetic flywheel energy storage device using finite element magnetic modeling. Applied Mechanics and Materials, 663. pp. 169-174. ISSN 16609336

Ghazanfar, B. and Awang, M. and Khan, S.R. and Fawad, H. (2013) Development of a new approach for incorporating tool tilting in friction stir welding. Advanced Materials Research, 701. pp. 378-381. ISSN 10226680

Seli, H. and Awang, M. and Ismail, A.I.M. and Rachman, E. and Ahmad, Z.A. (2013) Evaluation of properties and FEM model of the friction welded mild steel-Al6061-alumina. Materials Research, 16 (2). pp. 453-467. ISSN 15161439

Mohammadpour, E. and Awang, M. (2013) Non-linear multi-scale finite element method for prediction of tensile behaviour of carbon nanotube-reinforced polymer composites Nelinearna, višeskalna metoda kona�nih elemenata za predvidanje vla�nog ponašanja polimernih kompozita oja�anih uglji�nim nanocijevima. International Journal for Engineering Modelling, 26 (1-4). pp. 59-64. ISSN 13301365

Lias, M.R. and Awang, M. and Rao, T.V.V.L.N. (2013) A numerical FEM solution of gear root stress in offset axial mesh misalignment. Applied Mechanics and Materials, 393. pp. 375-380. ISSN 16609336

Shaari, K.Z.K. and Mohd Laziz, A. and Heinen, K. and Awang, M. and Sufian, S. and Mahadzir, S. (2012) CFD simulation of coaxial jet mixer using RANS turbulent models. Defect and Diffusion Forum, 326-32. pp. 416-421. ISSN 10120386

Minh, V.T. and Mohd Hashim, F.B. and Awang, M. (2012) Development of a real-time clutch transition strategy for a parallel hybrid electric vehicle. Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering, 226 (2). pp. 188-203. ISSN 09596518

Ganesan, T. and Awang, M. (2012) Large Eddy Simulation (LES) of a steady turbulent flow over a surface-mounted cube. CFD Letters, 4 (1). pp. 1-10. ISSN 21801363

Awang, M. and Othman, M.H. and Shaari, K.Z.K. and Wichi, M.N. (2012) Microstructure and mechanical properties evaluations of heat treated dissimilar metal joint weldment between API 5CT C90 and ASTM A182 F22. Defect and Diffusion Forum, 326-32. pp. 335-340. ISSN 10120386

Mohammadpour, E. and Awang, M. (2012) Nonlinear finite-element modeling of graphene and single- and multi-walled carbon nanotubes under axial tension. Applied Physics A: Materials Science and Processing, 106 (3). pp. 581-588. ISSN 09478396

Mohammadpour, E. and Awang, M. (2012) A finite element model to investigate the stress�strain behavior of single walled carbon nanotube. Advanced Structured Materials, 16. pp. 369-381. ISSN 18698433

Lias, M.R. and Rao, T.V.V.L.N. and Awang, M. and Khan, M.A. (2012) The stress distribution of gear tooth due to axial misalignment condition. Journal of Applied Sciences, 12 (23). pp. 2404-2410. ISSN 18125654

Irawan, F. and Irawan, S. and Awang, M. (2012) A unique opportunity for liquid carbon dioxide as an enhanced oil recovery method. Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 34 (7). pp. 654-661. ISSN 15567036

Minh, V.T. and Awang, M. and Parman, S. (2011) Conditions for stabilizability of linear switched systems. International Journal of Control, Automation and Systems, 9 (1). pp. 139-144. ISSN 15986446

Mohammadpour, E. and Awang, M. and Abdullah, M.Z. (2011) Predicting the Young's modulus of single-walled carbon nanotubes using finite element modeling. Journal of Applied Sciences, 11 (9). pp. 1653-1657. ISSN 18125654

Mohammadpour, E. and Awang, M. (2011) Predicting the nonlinear tensile behavior of carbon nanotubes using finite element simulation. Applied Physics A: Materials Science and Processing, 104 (2). pp. 609-614. ISSN 09478396

Hassan, C.S. and Hussain, P. and Awang, M. (2011) Stress analysis on direct joining of Sialon to AISI 430 ferritic stainless steel. Journal of Applied Sciences, 11 (10). pp. 1803-1808. ISSN 18125654

Awang, M. and Mucino, V.H. (2010) Energy generation during friction stir spot welding (FSSW) of Al 6061-T6 plates. Materials and Manufacturing Processes, 25 (1-3). pp. 167-174. ISSN 10426914

Awang, M. and Diyanti, I. (2010) The production of surfactant by direct reaction of pyrolysis oil for enhanced oil recovery. Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 32 (16). pp. 1540-1546. ISSN 15567036

Elraies, K.A. and Tan, I.M. and Awang, M. and Saaid, I. (2010) The synthesis and performance of sodium methyl ester sulfonate for enhanced oil recovery. Petroleum Science and Technology, 28 (17). pp. 1799-1806. ISSN 10916466

Awang, M. and Seng, G.M. (2008) Sulfonation of phenols extracted from the pyrolysis oil of oil palm shells for enhanced oil recovery. ChemSusChem, 1 (3). pp. 210-214. ISSN 18645631

Conference or Workshop Item

Shobri, N.N.S.M. and Pedapati, S.R. and Awang, M. (2021) Simulation of Friction Stir Spot Welding of Copper and Aluminium During Plunging Phase. In: UNSPECIFIED.

Chitturi, V. and Pedapati, S.R. and Awang, M. (2020) Effect of process parameters on friction stir lap welded 304 stainless steel and 5052 aluminium alloys. In: UNSPECIFIED.

Meyghani, B. and Awang, M. and Wu, C.S. (2020) Probabilistic finite element analysis of the deflection on a beam. In: UNSPECIFIED.

Ismail, A. and Awang, M. and Rahman, F.A. and Megat Khalid, P.Z. and Baharudin, B.A. and Rojan, M.A. and Hamid, D.A. (2019) The Effects of Welding Parameters on Macro and Micro-Structure of Friction Stir Welded Aluminium. In: UNSPECIFIED.

Chitturi, V. and Rao Pedapati, S. and Awang, M. (2019) A Review on Process Parameters and their effects on Dissimilar Friction Stir Welding of Aluminium and Steel Alloys. In: UNSPECIFIED.

Sedaralit, M.F. and Saaid, I.M. and Awang, M. (2018) Design and evaluation of in-situ chemical regeneration of foam for enhanced oil recovery EOR, 1D foam modelling-Malaysia's Offshore Oilfield. In: UNSPECIFIED.

Ayob, F. and Hussain, P. and Awang, M. and Zoolfakar, M.R. and Abdullah, A. and Baharudin, B.A. and Abdul Rahim, A.A. (2018) Effect of post heat treatment on the microstructure and microhardness of diffusion coupled gray cast iron and low carbon steel. In: UNSPECIFIED.

Paramaguru, D. and Pedapati, S.R. and Awang, M. and Mohebbi, H. (2018) Mathematical model to predict tensile strength of underwater friction stir welded (UFSW) on 5052 aluminium alloys. In: UNSPECIFIED.

Paramaguru, D. and Pedapati, S.R. and Awang, M. (2018) Microstructural analysis on underwater friction stir welded 5052 aluminium alloy. In: UNSPECIFIED.

Ismadi, M.Z.P. and Kurnia, J.C. and Sulaiman, S.A. and Hassan, S. and Awang, M. and Yusoff, P.S.M.M. and Urquia, A. (2018) The Need of Computer Modelling and Simulation (CMS) Competency among Employers in Malaysia. In: UNSPECIFIED.

Pedapati, S.R. and Paramaguru, D. and Awang, M. (2017) Microhardness and microstructural studies on underwater Friction Stir Welding of 5052 Aluminum Alloy. In: UNSPECIFIED.

Hamdi, Z. and Awang, M. and Bataee, M. and Vatanparast, M. (2017) Proposing low temperature CO2 for enhancing miscibility in high temperature reservoirs. In: UNSPECIFIED.

Hamdi, Z. and Awang, M. and Bataee, M. and Kamyab, M. (2016) Cold CO2 injection for balancing interfacial tension decrease and viscosity increase. In: UNSPECIFIED.

Hamdi, Z. and Awang, M. and Basyouni, A. and Hematpour, H. and Bataee, M. (2016) Comparison of CO2 and nitrogen injection at low temperatures in high temperature reservoirs for improving oil recovery. In: UNSPECIFIED.

Hamdi, Z. and Awang, M. and Zamani, A. (2016) Evaluating liquid CO2 injection technique for oil recovery using core flood experiments. In: UNSPECIFIED.

Negash, B.M. and Awang, M. and Jufar, S.R. and Robert, A.J. (2016) History matching of the PUNQ-S3 reservoir model using proxy modeling and multi-objective optimizations. In: UNSPECIFIED.

Ibrahim, N.N.M. and Hussain, P. and Awang, M. (2015) Morphology, topography, and hardness of diffusion bonded sialon to AISI 420 at different bonding time. In: UNSPECIFIED.

Kumar, S. and Awang, M. and Ahmed, S. and Dehraj, N.U.H. and Saleem, Y.S. (2015) Worm-like micelles as a mobility control agent for chemical enhanced oil recovery. In: UNSPECIFIED.

Akbar, A.R. and Awang, M. (2014) Auto-reinforce magnetic flywheel as recent advancement of automobile flywheel. In: UNSPECIFIED.

Awang, M. and Khan, S.R. and Ghazanfar, B. and Latif, F.A. (2014) Design, fabrication and testing of fixture for implementation of a new approach to incorporate tool tilting in friction stir welding. In: UNSPECIFIED.

Lias, M.R. and Awang, M. and Rao, T.V.V.L.N. and Ahmad, M.F.A. and Patil, S. (2014) Evaluation of spur gear pair on tooth root bending stress in radial misalignment contact condition. In: UNSPECIFIED.

Karim, M.F.A. and Ismail, M.C. and Awang, M. (2014) Laboratory deposition apparatus to study the effects of wax deposition on pipe magnetic field leakage signals. In: UNSPECIFIED.

Hamdi, Z. and Awang, M. and Moradi, B. (2014) Low temperature carbon dioxide injection in high temperature oil reservoirs. In: UNSPECIFIED.

Ibrahim, N.N.M. and Hussain, P. and Awang, M. (2014) Microstructure and hardness of high temperature gas nitrided aisi 420 martensitic stainless steel. In: UNSPECIFIED.

Rao, T.V.V.L.N. and Awang, M. and Lias, M.R. and Rani, A.M.A. (2014) Nonlinear analysis of spur gear pair with time-varying mesh stiffness. In: UNSPECIFIED.

Kumar, S. and Awang, M. and Abbhas, G. and Farouque, K. and Ahmed, S. (2014) Simulation protocol for core flooding: Relative permeability and capillary pressure analysis. In: UNSPECIFIED.

Ismail, A. and Awang, M. (2014) Surface hardness of friction stir welded AA6063 pipe. In: UNSPECIFIED.

Kumar, S. and Awang, M. and Abbas, G. and Kalwar, S.A. (2014) Wormlike micelles as a substitute of polymeric mobility control agent: Rheological comparison. In: UNSPECIFIED.

Moradi, B. and Awang, M. and Sabil, K.M. and Shoushtari, M.A. and Shuker, M.T. and Moradi, P. and Ajdari, H. (2013) Liquid carbon dioxide flooding in low temperature oil reservoirs. In: UNSPECIFIED.

Moradi, B. and Awang, M. and Sabil, K.M. (2013) Study of fluid characteristics in HP/HT deep gas wells. In: UNSPECIFIED.

Awang, M. and Dzulkarnain, I. and Zakaria, M.W. (2012) Enhancement of IFT reduction in surfactant flooding by branched alcohols. In: UNSPECIFIED.

Mohammadpour, E. and Awang, M. (2012) Finite element modeling of multi-walled carbon nanotubes under axial tension. In: UNSPECIFIED.

Awang, M. and Japper, A. and Sandeep and Dzulkarnain, I. (2012) Wormlike micelles for mobility control in EOR. In: UNSPECIFIED.

Awang, M. and Dzulkarnain, I. and Zakaria, M.W. (2011) Enhancement of IFT reduction in surfactant flooding by branched alcohols. In: UNSPECIFIED.

Patthi, U.B. and Awang, M. (2011) Friction stir welding on aluminum 6092/sic/25p/t6 metal matrix composite: Its microstructure evolution and mechanical properties. In: UNSPECIFIED.

Sataruddin, N.S.B. and Awang, M. and Shaari, K.Z.K. (2011) Material flow study during friction stir welding process using computational fluid dynamics simulation. In: UNSPECIFIED.

Mohammadpour, E. and Awang, M. (2011) Predicting a stretching behavior of carbon nanotubes using finite element method. In: UNSPECIFIED.

Musa, S.A. and Awang, M. and El-Khatib, N. and Demiral, B. (2011) Two-dimensional mathematical model for Heat Assisted WAG with Chemical Additives for heavy oil recovery. In: UNSPECIFIED.

Mohammadpour, E. and Awang, M. (2011) A finite element model for predicting the tensile behavior of carbon naotube. In: UNSPECIFIED.

Elraies, K.A. and Tan, I.M. and Awang, M. and Fathaddin, M.T. (2010) A new approach to low-cost, high performance chemical flooding system. In: UNSPECIFIED.

Awang, M. and Mucino, V.H. (2009) Energy generation during friction stir spot welding (FSSW) of al 6061-T6 plates. In: UNSPECIFIED.

Book

Meyghani, B. and Awang, M. (2022) Welding Simulations Using ABAQUS: A Practical Guide for Engineers. Springer Nature, pp. 1-123. ISBN 9789811913204; 9789811913198

Rao, T.V.V.L.N. and Abdul Rani, A.M. and Awang, M. and Baharom, M. and Uemur, Y. (2021) Biolubricants with Additives in Malaysia for Tribological Applications. Springer International Publishing, pp. 1541-1554. ISBN 9783030362683; 9783030362676