Article

Aslam, M. and Rahim, L.A.B. and Watada, J. and Rubab, S. and Khan, M.A. and AlQahtani, S.A. and Gadekallu, T.R. (2024) Cloud migration framework clustering method for social decision support in modernizing the legacy system. Transactions on Emerging Telecommunications Technologies, 35 (4).

Ahmed, M. and Ahmad, K.A. and Vo, D.-V.N. and Yusuf, M. and Haq, A. and Abdullah, A. and Aslam, M. and Patle, D.S. and Ahmad, Z. and Ahmad, E. and Athar, M. (2023) Recent trends in sustainable biodiesel production using heterogeneous nanocatalysts: Function of supports, promoters, synthesis techniques, reaction mechanism, and kinetics and thermodynamic studies. Energy Conversion and Management, 280.

Shahid, M.K. and Mainali, B. and Rout, P.R. and Lim, J.W. and Aslam, M. and Al-Rawajfeh, A.E. and Choi, Y. (2023) A Review of Membrane-Based Desalination Systems Powered by Renewable Energy Sources. Water (Switzerland), 15 (3).

Inayat, A. and Jamil, F. and Ahmed, S.F. and Ayoub, M. and Abdul, P.M. and Aslam, M. and Mofijur, M. and Khan, Z. and Mustafa, A. (2023) Thermal degradation characteristics, kinetic and thermodynamic analyses of date palm surface fibers at different heating rates. Fuel, 335.

Shakoor, A. and Khan, A.L. and Akhter, P. and Aslam, M. and Bilad, M.R. and Maafa, I.M. and Moustakas, K. and Nizami, A.-S. and Hussain, M. (2021) CO2 from waste to resource by developing novel mixed matrix membranes. Environmental Science and Pollution Research, 28 (10). pp. 12397-12405. ISSN 09441344

Khan, M.M. and Asghar, H.M.A. and Saulat, H. and Chawla, M. and Rafiq, S. and Khan, M.M. and Ya Jie, W. and Aslam, M. and Mukhtar, A. (2021) Hazardous wastewater treatment by low-cost sorbent with in situ regeneration using hybrid solar energy-electrochemical system. Water Environment Research, 93 (9). pp. 1554-1561. ISSN 10614303

Inayat, A. and Khan, Z. and Aslam, M. and Shahbaz, M. and Ahmad, M.M. and Abdul Mutalib, M.I. and Yusup, S. (2021) Integrated adsorption steam gasification for enhanced hydrogen production from palm waste at bench scale plant. International Journal of Hydrogen Energy, 46 (59). pp. 30581-30591. ISSN 03603199

Ahmad, F. and Mohammad, M. and Muhsan, A.S. and Ali, M. and Naseer, A. and Aslam, M. and Malik, M.R.R. (2020) Effect of Thermal Cycling on Thermal Conductivity of Powder Injection Moulded MWCNT Reinforced Copper Matrix Composites. Lecture Notes in Mechanical Engineering. pp. 377-387. ISSN 21954356

Inayat, A. and Raza, M. and Khan, Z. and Ghenai, C. and Aslam, M. and Shahbaz, M. and Ayoub, M. (2020) Flowsheet Modeling and Simulation of Biomass Steam Gasification for Hydrogen Production. Chemical Engineering and Technology, 43 (4). pp. 649-660. ISSN 09307516

Waqas, S. and Bilad, M.R. and Man, Z. and Wibisono, Y. and Jaafar, J. and Indra Mahlia, T.M. and Khan, A.L. and Aslam, M. (2020) Recent progress in integrated fixed-film activated sludge process for wastewater treatment: A review. Journal of Environmental Management, 268. ISSN 03014797

Aslam, M. and Rahim, L.A. and Hashmani, M. and Watada, J. (2020) Statistical comparison of architecture driven modernization with other cloud migration frameworks and formation of clusters. International Journal on Advanced Science, Engineering and Information Technology (1). pp. 112-119. ISSN 20885334

Bano, S. and Tariq, S.R. and Ilyas, A. and Aslam, M. and Bilad, M.R. and Nizami, A.-S. and Khan, A.L. (2020) Synergistic solution of CO2 capture by novel lanthanide-based MOF-76 yttrium nanocrystals in mixed-matrix membranes. Energy and Environment, 31 (4). pp. 692-712. ISSN 0958305X

Zahari, A.S. and Rahim, L.A. and Nurhadi, N.A. and Aslam, M. (2020) A domain-specific modelling language for adventure educational games and flow theory. International Journal on Advanced Science, Engineering and Information Technology, 10 (3). pp. 999-1007. ISSN 20885334

Shahbaz, M. and Al-Ansari, T. and Aslam, M. and Khan, Z. and Inayat, A. and Athar, M. and Naqvi, S.R. and Ahmed, M.A. and McKay, G. (2020) A state of the art review on biomass processing and conversion technologies to produce hydrogen and its recovery via membrane separation. International Journal of Hydrogen Energy, 45 (30). pp. 15166-15195. ISSN 03603199

Ali, M. and Ahmad, F. and Melor, P.S. and Yahya, N. and Altaf, K. and Omar, M.A. and Aslam, M. (2019) Binder removal by a two-stage debinding process for powder injection molding Fe-50Ni alloy parts. Materials Research Express, 6 (8). ISSN 20531591

Malik, S. and Fatima, F. and Imran, A. and Chuah, L.F. and Klemeš, J.J. and Khaliq, I.H. and Asif, S. and Aslam, M. and Jamil, F. and Durrani, A.K. and Akbar, M.M. and Shahbaz, M. and Usman, M. and Atabani, A.E. and Naqvi, S.R. and Yusup, S. and Bokhari, A. (2019) Improved project control for sustainable development of construction sector to reduce environment risks. Journal of Cleaner Production, 240. ISSN 09596526

Ali, M. and Ahmad, F. and Melor, P.S. and Yasir, M. and Yahya, N. and Aslam, M. and Malik, M.R.R. (2019) Influence of powder loading on densification and microstructure of injection molded Fe-50Ni soft magnetic alloys Einfluss der Pulverbeladung auf die Verdichtung und das Gefüge spritzgegossener weichmagnetischer Fe-50Ni-Legierungen. Materialwissenschaft und Werkstofftechnik, 50 (3). pp. 274-282. ISSN 09335137

Khan, Z. and Yusup, S. and Aslam, M. and Inayat, A. and Shahbaz, M. and Raza Naqvi, S. and Farooq, R. and Watson, I. (2019) NO and SO2 emissions in palm kernel shell catalytic steam gasification with in-situ CO2 adsorption for hydrogen production in a pilot-scale fluidized bed gasification system. Journal of Cleaner Production, 236. ISSN 09596526

Tahir, Z. and Aslam, M. and Gilani, M.A. and Bilad, M.R. and Anjum, M.W. and Zhu, L.-P. and Khan, A.L. (2019) �SO3H functionalized UiO-66 nanocrystals in Polysulfone based mixed matrix membranes: Synthesis and application for efficient CO2 capture. Separation and Purification Technology, 224. pp. 524-533. ISSN 13835866

Naseer, A. and Ahmad, F. and Aslam, M. and Guan, B.H. and Harun, W.S.W. and Muhamad, N. and Raza, M.R. and German, R.M. (2019) A review of processing techniques for graphene-reinforced metal matrix composites. Materials and Manufacturing Processes, 34 (9). pp. 957-985. ISSN 10426914

Aslam, M. and Ahmad, R. and Yasin, M. and Khan, A.L. and Shahid, M.K. and Hossain, S. and Khan, Z. and Jamil, F. and Rafiq, S. and Bilad, M.R. and Kim, J. and Kumar, G. (2018) Anaerobic membrane bioreactors for biohydrogen production: Recent developments, challenges and perspectives. Bioresource Technology, 269. pp. 452-464. ISSN 09608524

Aslam, M. and Rahim, L.B.A. and Watada, J. and Hashmani, M. (2018) Clustering-based cloud migration strategies. Journal of Advanced Computational Intelligence and Intelligent Informatics, 22 (3). pp. 295-305. ISSN 13430130

Eliseus, A. and Bilad, M.R. and Nordin, N.A.H.M. and Khan, A.L. and Putra, Z.A. and Wirzal, M.D.H. and Aslam, M. and Aqsha, A. and Jaafar, J. (2018) Two-way switch: Maximizing productivity of tilted panel in membrane bioreactor. Journal of Environmental Management, 228. pp. 529-537. ISSN 03014797

Raza, M.R. and Ahmad, F. and Muhamad, N. and Sulong, A.B. and Omar, M.A. and Akhtar, M.N. and Aslam, M. and Sherazi, I. (2017) Effects of debinding and sintering atmosphere on properties and corrosion resistance of powder injection molded 316 L - Stainless steel. Sains Malaysiana, 46 (2). pp. 285-293. ISSN 01266039

Raza, M.R. and Ahmad, F. and Muhamad, N. and Sulong, A.B. and Omar, M.A. and Akhtar, M.N. and Aslam, M. (2016) Effects of solid loading and cooling rate on the mechanical properties and corrosion behavior of powder injection molded 316 L stainless steel. Powder Technology, 289. pp. 135-142. ISSN 00325910

Aslam, M. and Ahmad, F. and Yusoff, P.S.M.B.M. and Chai, W.L. and Ngeow, W.C. and Nawi, M.K.A. (2016) Investigation of Boron Addition on Densification and Cytotoxicity of Powder Injection Molded 316L Stainless Steel Dental Materials. Arabian Journal for Science and Engineering, 41 (11). pp. 4669-4681. ISSN 2193567X

Aslam, M. and Ahmad, F. and Yusoff, P.S.M.B.M. and Altaf, K. and Omar, M.A. and Abdul Khalil, H.P.S. and Raza, M.R. (2016) Investigation of Rheological Behavior of Low Pressure Injection Molded Stainless Steel Feedstocks. Advances in Materials Science and Engineering, 2016. ISSN 16878434

Aslam, M. and Ahmad, F. and Yusoff, P.S.M.B.M. and Altaf, K. and Omar, M.A. and Rafi Raza, M. (2016) Low pressure injection molding of boron admixed 316l stainless steel for engineering applications. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 11960-11965. ISSN 18196608

Aslam, M. and Ahmad, F. and Yusoff, P.S.M.B.M. and Altaf, K. and Omar, M.A. and German, R.M. (2016) Powder injection molding of biocompatible stainless steel biodevices. Powder Technology, 295. pp. 84-95. ISSN 00325910

Ahmad, F. and Aslam, M. and Raza, M.R. and Muhsan, A.S. and Shirazi, M.I. (2014) Experimental investigation on thermal conduction of carbon nanotubes reinforced copper matrix composites. Applied Mechanics and Materials, 564. pp. 455-460. ISSN 16609336

Conference or Workshop Item

Ali, M. and Ahmad, F. and Melor, P.S. and Yahya, N. and Aslam, M. (2019) Investigation of boron effect on the densification of Fe-50Ni soft magnetic alloys produced by powder metallurgy route. In: UNSPECIFIED.

Naseer, A. and Ahmad, F. and Muhsan, A.S. and Aslam, M. (2019) Investigation of suitable graphene reinforcements for copper based PIM feedstock. In: UNSPECIFIED.

Aslam, M. and Ab Rahim, L.B. and Hashmani, M. and Watada, J. (2018) Domain Specific Modelling Language of PIM for OSSS on Infrastructure Cloud Service Model. In: UNSPECIFIED.

Altaf, K. and Rani, A.M.A. and Ahmad, F. and Aslam, M. (2016) Rapid tooling for powder injection moulding process. In: UNSPECIFIED.

Ahmad, F. and Aslam, M. and Altaf, K. and Shirazi, I. (2015) Effects of mold geometry on fiber orientation of powder injection molded metal matrix composites. In: UNSPECIFIED.

Shirazi, I. and Ahmad, F. and Raza, M.R. and Muhsan, A.S. and Aslam, M. (2015) Shear controlled alignment of short carbon fibers in copper matrix composite green samples produced by powder injection molding. In: UNSPECIFIED.

Aslam, M. and Ahmad, F. and Bintimegat Yusoff, P.S.M. and Muhamad, N. and Raza, M.R. and Irfan Shirazi, M. (2014) Effects of admixed titanium on densification of 316L stainless steel powder during sintering. In: UNSPECIFIED.

Irfan Shirazi, M. and Ahmad, F. and Rafi Raza, M. and Muhsan, A.S. and Omer, M.A. and Aslam, M. (2014) Orientation of carbon fibers in copper matrix produced by powder injection molding. In: UNSPECIFIED.

Ahmad, F. and Lo, S.H.J. and Aslam, M. and Haziq, A. (2013) Tribology behaviour of alumina particles reinforced aluminium matrix composites and brake disc materials. In: UNSPECIFIED.