Items where Author is "Ariwahjoedi, B."

Group by: Item Type | No Grouping
Number of items: 56.

Article

Hidayat, M.I.P. and Ariwahjoedi, B. and Parman, S. and Irawan, S. (2018) A Meshfree Approach for Transient Heat Conduction Analysis of Nonlinear Functionally Graded Materials. International Journal of Computational Methods, 15 (2). ISSN 02198762

Hidayat, M.I.P. and Ariwahjoedi, B. and Parman, S. and Rao, T.V.V.L.N. (2017) Meshless Local B-Spline Collocation Method for Two-Dimensional Heat Conduction Problems With Nonhomogenous and Time-Dependent Heat Sources. Journal of Heat Transfer, 139 (7). ISSN 00221481

Lubis, A.M.H.S. and Ariwahjoedi, B. and Sudin, M. (2017) XPS characterization of tribo-layer formation on the steel lubricated with crude and epoxidized jatropha oil under boundary lubrication. Industrial Lubrication and Tribology, 69 (3). pp. 371-377. ISSN 00368792

Hidayat, M.I.P. and Ariwahjoedi, B. and Parman, S. (2016) B-spline collocation method for boundary value problems in complex domains. International Journal of Computing Science and Mathematics, 7 (2). pp. 110-125. ISSN 17525055

Jaal, R.A. and Ismail, M.C. and Ariwahjoedi, B. (2016) Determination of critical micelle concentration (CMC) of corrosion inhibitor via electrochemical measurement. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13431-13434. ISSN 18196608

Yasir, M. and Ginta, T.L. and Ariwahjoedi, B. and Alkali, A.U. and Danish, M. (2016) Effect of cutting speed and feed rate on surface roughness of AISI 316l SS using end-milling. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2496-2500. ISSN 18196608

Yasir, M. and Ginta, T.L. and Ariwahjoedi, B. and Danish, M. and Alkali, A.U. (2016) Evaluation of chips formation of AISI 316L SS using precision end-milling. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12903-12907. ISSN 18196608

Hidayat, M.I.P. and Ariwahjoedi, B. and Parman, S. (2015) B-spline collocation with domain decomposition method and its application for singularly perturbed convection-diffusion problems. Springer Series in Materials Science, 204. pp. 27-47. ISSN 0933033X

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. and Shaari, K.Z.K. (2015) Effect of pre-coat solution temperature on fluidized bed urea coatings. Surface Engineering, 31 (7). pp. 486-491. ISSN 02670844

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. (2015) Effect of the borax mass and pre-spray medium temperature on droplet size and velocity vector distributions of intermittently sprayed starchy solutions. Physical Chemistry Chemical Physics, 17 (5). pp. 3704-3714. ISSN 14639076

Naz, M.Y. and Sulaiman, S.A. and Man, Z. and Ariwahjoedi, B. (2015) Effect of the water spray stress on swirling fluidized bed height. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10192-10195. ISSN 18196608

Lubis, A.M.H.S. and Ariwahjoedi, B. and Sudin, M.B. (2015) Investigation on oxidation and thermal stability of jatropha oil. Jurnal Teknologi, 77 (21). pp. 79-83. ISSN 01279696

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. and Zilati, K. (2015) Visual characterization of heated water spray jet breakup induced by full cone spray nozzles. Journal of Applied Mechanics and Technical Physics, 56 (2). pp. 211-219. ISSN 00218944

Hidayat, M.I.P. and Ariwahjoedi, B. and Parman, S. (2015) A new meshless local B-spline basis functions-FD method for two-dimensional heat conduction problems. International Journal of Numerical Methods for Heat and Fluid Flow, 25 (2). pp. 225-251. ISSN 09615539

Almustapha, S. and Ali Khan, A.A. and Omar, A.A. and Ariwahjoedi, B. and Abdullah, M.A. (2014) Cellulose-modified carbon electrode for in situ lead detection. Applied Mechanics and Materials, 625. pp. 136-139. ISSN 16609336

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. and Shaari, K.Z.K. (2014) Characterization of modified tapioca starch solutions and their sprays for high temperature coating applications. The Scientific World Journal, 2014. ISSN 1537744X

Konda, R.E. and Sulaiman, S.A. and Ariwahjoedi, B. (2014) Design and Development of Laboratory Scale Updraft Gasifier for Gasification of Oil Palm Fronds. Asian Journal of Scientific Research, 7 (3). pp. 341-353. ISSN 19921454

Hidayat, M.I.P. and Ariwahjoedi, B. and Setyamartana, P. and Megat Yusoff, P.S.M. and Rao, T.V.V.L.N. (2014) Meshless local B-spline basis functions-FD method and its application for heat conduction problem with spatially varying heat generation. Applied Mechanics and Materials, 465-46. pp. 490-495. ISSN 16609336

Ridha, S. and Irawan, S. and Ariwahjoedi, B. (2014) Prediction Equation for Permeability of Class G Oilwell Cement Under Reservoir Conditions. Arabian Journal for Science and Engineering, 39 (6). pp. 5219-5228. ISSN 2193567X

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. and Ku Shaari, K.Z. (2014) Study of primary atomisation phenomenon of modified starch solution stream at elevated temperature. Materials Research Innovations, 18. S6-135-S6-139. ISSN 14328917

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. and Ku Shaari, K.Z. (2014) Visual Characterization of Airless Water Spray Jet Breakup and Vortex Clouds Formation at Elevated Temperature and Pressure. Arabian Journal for Science and Engineering, 39 (10). pp. 7241-7250. ISSN 2193567X

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. and Ku Shaari, K.Z. (2014) Visual study of hollow cone water spray jet breakup process at elevated temperatures and pressures. Applied Mechanics and Materials, 465-46. pp. 485-489. ISSN 16609336

Permana, K.D. and Shuib, A.S. and Ariwahjoedi, B. (2014) A review of magnesium alloys for use in biodegradable cardiovascular stents. World Applied Sciences Journal, 30 (30 A). pp. 375-381. ISSN 18184952

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. (2013) Experimental study of airless spray jet breakup at elevated temperature and pressure. Applied Mechanics and Materials, 393. pp. 711-716. ISSN 16609336

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. and Ku Shaari, K.Z. (2013) Investigation of vortex clouds and droplet sizes in heated water spray patterns generated by axisymmetric full cone nozzles. The Scientific World Journal, 2013. ISSN 1537744X

Elneel, R. and Anwar, S. and Ariwahjoedi, B. (2013) Prediction of heating values of oil palm fronds from ultimate analysis. Journal of Applied Sciences, 13 (3). pp. 491-496. ISSN 18125654

Riza, R. and Ariwahjoedi, B. and Sulaiman, S.A. (2013) Solar radiation simulation by using zero-dimensional climate model. Asian Journal of Scientific Research, 6 (2). pp. 353-359. ISSN 19921454

Ridha, S. and Irawan, S. and Ariwahjoedi, B. (2013) Strength prediction of Class G oilwell cement during early ages by electrical conductivity. Journal of Petroleum Exploration and Production Technology, 3 (4). pp. 303-311. ISSN 21900558

Syah Lubis, A.M.H. and Ariwahjoedi, B. and Sudin, M. and Parman, S. (2013) Thermo oxidative degradation behavior of jatropha curcass L. oil in the presence of antioxidant. Applied Mechanics and Materials, 393. pp. 893-898. ISSN 16609336

Lubis, A.M.H.S. and Sudin, M. and Ariwahjoedi, B. (2012) Four-ball study of Tricresyl Phosphate effect to jatropha oil for transmission oil application. Journal of Applied Sciences, 12 (24). pp. 2503-2510. ISSN 18125654

Nazir, M.S. and Abdullah, M.A.B. and Ariwahjoedi, B. and Yussof, A.W. (2012) Hazard analysis and critical control points (HACCP) in palm oil processing to improve the productivity and food quality of palm oil vegetation in Perak, Malaysia Análisis de Peligros y Puntos Críticos de Control (APPCC) en el procesamiento de aceite de palma para mejorar la productividad y la calidad alimenticia de la vegetación de aceite de palma en Perak, Malasia. Revista Cientifica UDO Agricola, 12 (1). pp. 198-201. ISSN 13179152

Kakooei, S. and Ismail, M.C. and Ariwahjoedi, B. (2012) Mechanisms of microbiologically influenced corrosion: A review. World Applied Sciences Journal, 17 (4). pp. 524-531. ISSN 18184952

Ridha, S. and Irawan, S. and Ariwahjoedi, B. and Azizli, K.A.B.M. and Nuruddin, M.F. and Khairy, H. (2012) Modified Johnson model for permeability estimation in oil well cement during early hydration. Research Journal of Applied Sciences, Engineering and Technology, 4 (17). pp. 2920-2925. ISSN 20407459

Konda, R.E. and Sulaiman, S.A. and Ariwahjoedi, B. (2012) Syngas Production from Gasification of Oil Palm Fronds with an updraft gasifier. Journal of Applied Sciences, 12 (24). pp. 2555-2561. ISSN 18125654

Kurnia, K.A. and Ariwahjoedi, B. and Mutalib, M.I.A. and Murugesan, T. (2011) Density and excess molar volume of the protic ionic liquid bis(2-hydroxyethyl)ammonium acetate with alcohols. Journal of Solution Chemistry, 40 (3). pp. 470-480. ISSN 00959782

Ariwahjoedi, B. and Parman, S. (2011) Does phenotype-genotype distinction apply for simple molecules?: A thought in the chemical philosophical context. Journal of Applied Sciences, 11 (7). pp. 1249-1254. ISSN 18125654

Zaharuddin, W.A.W. and Ariwahjoedi, B. and Hussain, P. (2011) Effect of vermiculite addition on thermal characteristic of water-based acrylic fire retardant coating formulation. Journal of Applied Sciences, 11 (10). pp. 1763-1769. ISSN 18125654

Kurnia, K.A. and Mutalib, M.I.A. and Ariwahjoedi, B. (2011) Estimation of physicochemical properties of ionic liquids H 2N-C2mimBF4 and H2N-C 3mimBF4. Journal of Chemical and Engineering Data, 56 (5). pp. 2557-2562. ISSN 00219568

Hidayat, M.I.P. and Ariwahjoedi, B. (2011) Model of neural networks with sigmoid and radial basis functions for velocity-field reconstruction in fluid-structure interaction problem. Journal of Applied Sciences, 11 (9). pp. 1587-1593. ISSN 18125654

Kurnia, K.A. and Mutalib, M.I.A. and Murugesan, T. and Ariwahjoedi, B. (2011) Physicochemical properties of binary mixtures of the protic ionic liquid bis(2-hydroxyethyl)methylammonium formate with methanol, ethanol, and 1-propanol. Journal of Solution Chemistry, 40 (5). pp. 818-831. ISSN 00959782

Ugheoke, B.I. and Mamat, O. and Ariwahjoedi, B. (2010) A brief survey of the literature on silica refractory research and development: The case for nanostructured silica obtained from rice husk ash (RHA). Defect and Diffusion Forum, 307. pp. 53-62. ISSN 10120386

Conference or Workshop Item

Permana, K.D. and Ariwahjoedi, B. and Shuib, A.S. (2016) Mg-1.0Zn-xca-based biodegradable cardiovascular stent alloy: A microstuctural and textural studies. In: UNSPECIFIED.

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. (2015) Sauter mean diameter statistics of the starch dispersion atomized with hydraulic nozzle. In: UNSPECIFIED.

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. (2015) Spatio-temporal droplet size statistics in developing spray of starchy solution. In: UNSPECIFIED.

Jaal, R.A. and Ismail, M.C. and Ariwahjoedi, B. (2014) A review of CO2 corrosion inhibition by imidazoline-based inhibitor. In: UNSPECIFIED.

Hidayat, M.I.P. and Ariwahjoedi, B. and Parman, S. (2013) B-spline collocation with domain decomposition method. In: UNSPECIFIED.

Namma, H.A. and Wagiran, H. and Hussin, R. and Ariwahjoedi, B. (2012) Effect of co-doped SnO2 nanoparticles on photoluminescence of cu-doped potassium lithium borate glass. In: UNSPECIFIED.

Elneel, R. and Anwar, S. and Ariwahjoedi, B. (2012) Feasibility study of gasification oil palm fronds in an updraft gasifier. In: UNSPECIFIED.

Ridha, S. and Irawan, S. and Ariwahjoedi, B. (2011) Conductivity dispersion characteristic of cement slurry during early hydration. In: UNSPECIFIED.

Ridha, S. and Irawan, S. and Ariwahjoedi, B. (2011) Microstructure parameter estimation in permeability calculation of well cement during early hydration by a simple particle expansion model. In: UNSPECIFIED.

Ridha, S. and Irawan, S. and Ariwahjoedi, B. (2011) Prediction of interface conductivity of cement slurry during early hydration considering the effect of curing temperature and pressure. In: UNSPECIFIED.

Riza, R. and Ariwahjoedi, B. and Sulaiman, S.A. (2011) Preliminary study of the zero-dimensional climate modeling using numerical method. In: UNSPECIFIED.

Lubis, A.M.H.S. and Sudin, M.B. and Ariwahjoedi, B. (2011) Wear preventive characteristics of esterified jatropha oil. In: UNSPECIFIED.

Ariwahjoedi, B. and Fuad, Kh. and Ariefin, M. (2010) Direct solid-state electrochemical synthesis of silicon tetrachloride from silica at ambient temperatures and pressures. In: UNSPECIFIED.

Zaharuddin, W.A.W. and Ariwahjoedi, B. and Hussain, P. (2010) Effect of vermiculite on fire protectiveness of waterbased acrylic fire retardant coating. In: UNSPECIFIED.

Hidayat, M.I.P. and Ariwahjoedi, B. (2010) Radial basis function neural networks for velocity-field reconstruction in fluid-structure interaction problem. In: UNSPECIFIED.

This list was generated on Thu Dec 19 05:58:57 2024 +08.