Article

Raza, A. and Altaf, K. and Ahmad, F. and Hussain, G. and Alkahtani, M. and wei, Hongyu (2024) Experimental study and characterisation of 316L stainless steel parts fabricated with metal fused filament fabrication. Journal of Materials Research and Technology, 30. pp. 6686-6698.

Ahmed, S.W. and Altaf, K. and Tariq, A. and Alkahtani, M. and Buhl, J. and Hussain, G. (2024) Geometric Optimization of SLM-Printed AlSi10Mg Radial Heat Sinks: A Numerical and Experimental Approach for Natural Convection Conditions. Arabian Journal for Science and Engineering.

Hassan, A. and Altaf, K. and Awang, M. and Pedapati, S.R. and Ahmed, N. and Marode, R.V. (2024) Multi-objective optimization of friction stir additively manufactured Al-7075 multi-layered laminates. Journal of Alloys and Compounds, 993.

Ahmed, S.W. and Tariq, A. and Altaf, K. and Ali, S. and Hussain, G. and Baharom, M.B. (2024) Thermal Analysis of Helical Pin Fins at Different Pitch Steps Through Numerical Technique. Lecture Notes in Mechanical Engineering. pp. 71-83. ISSN 21954356

Tariq, A. and Ahmed, S.W. and Bin Baharom, M. and Altaf, K. and Hussain, G. and Jamil, A. and Mohammed, S.E. and Ali, H.M. (2024) An investigation of thermal and hydrodynamic behaviour of compound fins under turbulent flow conditions: A numerical and experimental approach. Alexandria Engineering Journal, 89. pp. 149-171.

Shah, S.Z.H. and Altaf, K. and Lee, J. and Sharif, T. and Choudhry, R.S. and Hussain, S.M. (2023) Bending performance and failure mechanisms of hybrid and regular sandwich composite structures with 3D printed corrugated cores. Composite Structures, 325.

Gebremedhen, H.S. and Woldemichael, D.E. and Hashim, F.M. and Altaf, K. and Chong, H.C. (2023) Effect of Filtering Techniques in Manufacturing of Optimal Topologies Using Additive Manufacturing. Green Energy and Technology. pp. 167-177. ISSN 18653529

Hassan, A. and Awang, M. and Pedapati, S.R. and Altaf, K. and Marode, R.V. and Ahmed, S.W. (2023) Experimental investigation on tool pin profile for defect-free multi-layered laminates using friction stir additive manufacturing. Results in Engineering, 20.

Hassan, A. and Awang, M. and Pedapati, S.R. and Altaf, K. and Ahmed, N. and Marode, R.V. and Ahmed, S.W. and Soomro, I.A. (2023) Investigation on Surface Hardness and Microstructure Evolution in AA 7075-T651 Multi-Layered Laminate Fabricated Through Friction Stir Additive Manufacturing. Iranian Journal of Materials Science and Engineering, 20 (4). ISSN 17350808

Shahed, C.A. and Ahmad, F. and Günister, E. and Altaf, K. and Ali, S. and Raza, A. and Malik, K. and Haider, W. (2023) Microstructure and mechanical performance of low-cost biomedical-grade Titanium-316L alloy. Journal of Materials Research and Technology, 27. pp. 8008-8022.

Fayyaz, M.S. and Abbasi, A.Z. and Altaf, K. and Alqahtani, N. and Ting, D.H. (2023) Not inspired enough: the mediating role of customer engagement between YouTube�s perceived advertising value and customer inspiration. Kybernetes. ISSN 0368492X

Ahmad, A. and Abbas, A. and Hussain, G. and Al-Abbasi, O. and Alkahtani, M. and Altaf, K. (2023) Performance evaluation of 3D printed polymer heat exchangers: influence of printing temperature, printing speed and wall thickness with consideration of surface roughness. International Journal of Advanced Manufacturing Technology, 128 (7-8). pp. 3627-3647.

Raza, A. and Altaf, K. and Ahmad, F. and Shahed, C.A. and Ahmed, S.W. (2023) STUDY AND ANALYSIS OF METAL PARTS FABRICATED THROUGH FUSED DEPOSITION MODELLING, DE-BINDING AND SINTERING PROCESSES. Journal of Engineering Science and Technology, 18 (2). pp. 827-843.

Qayyum, H. and Hussain, G. and Sulaiman, M. and Hassan, M. and Ali, A. and Muhammad, R. and Wei, H. and Shehbaz, T. and Aamir, M. and Altaf, K. (2022) Effect of Raster Angle and Infill Pattern on the In-Plane and Edgewise Flexural Properties of Fused Filament Fabricated Acrylonitrile�Butadiene�Styrene. Applied Sciences (Switzerland), 12 (24). ISSN 20763417

Hassan, F. and Jamil, F. and Hussain, A. and Ali, H.M. and Janjua, M.M. and Khushnood, S. and Farhan, M. and Altaf, K. and Said, Z. and Li, C. (2022) Recent advancements in latent heat phase change materials and their applications for thermal energy storage and buildings: A state of the art review. Sustainable Energy Technologies and Assessments, 49. ISSN 22131388

Altaf, K. and Tariq, A. and Ahmad, S.W. and Hussain, G. and Ratlamwala, T.A.H. and Ali, H.M. (2022) Thermal and hydraulic analysis of slotted plate fins heat sinks using numerical and experimental techniques. Case Studies in Thermal Engineering, 35. ISSN 2214157X

Tariq, A. and Altaf, K. and Ahmad, S.W. and Hussain, G. and Ratlamwala, T.A.H. (2021) Comparative numerical and experimental analysis of thermal and hydraulic performance of improved plate fin heat sinks. Applied Thermal Engineering, 182. ISSN 13594311

Zahid Gill, E. and Abdul Hussain Ratlamwala, T. and Waseem, S. and Hussain, G. and Alkahtani, M. and Altaf, K. (2021) Life Cycle Assessment and Feasibility Study of Solar Based Multi- Generation System. Sustainable Energy Technologies and Assessments, 47. ISSN 22131388

Ahmed, S.W. and Hussain, G. and Al-Ghamdi, K.A. and Altaf, K. (2021) Mechanical properties of an additive manufactured CF-PLA/ABS hybrid composite sheet. Journal of Thermoplastic Composite Materials, 34 (11). pp. 1577-1596. ISSN 08927057

Tariq, A. and Altaf, K. and Hussain, G. and Reezwan, M. (2021) Plate fin heat sink for the application in solar thermal power. Green Energy and Technology. pp. 115-131. ISSN 18653529

Ahmed, S.W. and Hussain, G. and Altaf, K. and Ali, S. and Alkahtani, M. and Abidi, M.H. and Alzabidi, A. (2020) On the effects of process parameters and optimization of interlaminate bond strength in 3D printed ABS/CF-PLA composite. Polymers, 12 (9). ISSN 20734360

Ali, M. and Ahmad, F. and Melor, P.S. and Yahya, N. and Altaf, K. and Omar, M.A. and Aslam, M. (2019) Binder removal by a two-stage debinding process for powder injection molding Fe-50Ni alloy parts. Materials Research Express, 6 (8). ISSN 20531591

Ali, A. and Nasir, M.A. and Khalid, M.Y. and Nauman, S. and Shaker, K. and Khushnood, S. and Altaf, K. and Zeeshan, M. and Hussain, A. (2019) Experimental and numerical characterization of mechanical properties of carbon/jute fabric reinforced epoxy hybrid composites. Journal of Mechanical Science and Technology, 33 (9). pp. 4217-4226. ISSN 1738494X

Wei, H. and Latif, A. and Hussain, G. and Heidarshenas, B. and Altaf, K. (2019) Influence of tool material, tool geometry, process parameters, stacking sequence, and heat sink on producing sound Al/cu lap joints through friction stir welding. Metals, 9 (8). ISSN 20754701

Ali, S. and Abdul Rani, A.M. and Altaf, K. and Hussain, P. and Prakash, C. and Hastuty, S. and Rao, T.V.V.L.N. and Aliyu, A.�A.A. and Subramaniam, K. (2019) Investigation of alloy composition and sintering parameters on the corrosion resistance and microhardness of 316L stainless steel alloy. Lecture Notes in Mechanical Engineering. pp. 532-541. ISSN 21954356

Tariq, A. and Altaf, K. and Rani, A.M.A. and Baharom, M. and Aziz, A.R.A. (2019) Study of heat transfer attributes of custom fins for Crank-Rocker engine block using ANSYS. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 62 (2). pp. 235-243. ISSN 22897879

Azam, F.I. and Rani, A.M.A. and Altaf, K. and Zaharin, H.A. (2018) Experimental and numerical investigation of six-bar linkage application to bellow globe valve for compact design. Applied Sciences (Switzerland), 8 (10). ISSN 20763417

Altaf, K. and Qayyum, J.A. and Rani, A.M.A. and Ahmad, F. and Megat-Yusoff, P.S.M. and Baharom, M. and Aziz, A.R.A. and Jahanzaib, M. and German, R.M. (2018) Performance analysis of enhanced 3D printed polymer molds for metal injection molding process. Metals, 8 (6). ISSN 20754701

Altaf, K. and Baharom, M. and Aziz, A.R.A. and Qayyum, J.A. and Jahanzaib, M. (2018) Rapid prototyping of a customized cooling system for a novel crank rocker engine. International Journal of Engineering and Technology(UAE), 7 (3). pp. 90-93. ISSN 2227524X

Azam, F.I. and Rani, A.M.A. and Altaf, K. and Zaharin, H.A. (2017) Additive manufacturing design of globe valve for optimized flow. Transactions of the Canadian Society for Mechanical Engineering, 41 (5). pp. 717-723. ISSN 03158977

Altaf, K. and Zulkarnain, A.F. and Qayyum, J.A. and Jahanzaib, M. (2017) Optimum build orientation OF3D printed parts for a robot gripper. ARPN Journal of Engineering and Applied Sciences, 12 (20). pp. 5772-5777. ISSN 18196608

Qayyum, J.A. and Altaf, K. and Abdul Rani, A.M. and Ahmad, F. and Jahanzaib, M. (2017) Performance of 3D printed polymer mold for metal injection molding process. ARPN Journal of Engineering and Applied Sciences, 12 (22). pp. 6430-6434. ISSN 18196608

Altaf, K. and Rani, A.M.A. and Woldemichael, D.E. and Lemma, T.A. and Jian, C.Z. and Fiqri, M.H. (2016) Application of additive manufacturing/3D printing technologies and investment casting for prototype development of polycrystalline diamond compact (PDC) drill bit body. ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6514-6518. ISSN 18196608

Altaf, K. and Abdul Rani, A.M. and Ahmad, F. and Baharom, M. and Raghavan, V.R. (2016) Determining the effects of thermal conductivity on epoxy molds using profiled cooling channels with metal inserts. Journal of Mechanical Science and Technology, 30 (11). pp. 4901-4907. ISSN 1738494X

Qayyum, J.A. and Altaf, K. and Mahmood, A. and Shah, M. and Rani, A.M.A. (2016) Grain refinement of LM25 Aluminum alloy casting using sloping plate process. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13049-13052. ISSN 18196608

Baig, Z. and Mamat, O. and Mustapha, M. and Altaf, K. and Mailabari, R.J. (2016) Graphene nanoplatelets (GNPS) exfoliation and dispersion in metal powder using different solvents. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12023-12028. ISSN 18196608

Aslam, M. and Ahmad, F. and Yusoff, P.S.M.B.M. and Altaf, K. and Omar, M.A. and Abdul Khalil, H.P.S. and Raza, M.R. (2016) Investigation of Rheological Behavior of Low Pressure Injection Molded Stainless Steel Feedstocks. Advances in Materials Science and Engineering, 2016. ISSN 16878434

Aslam, M. and Ahmad, F. and Yusoff, P.S.M.B.M. and Altaf, K. and Omar, M.A. and Rafi Raza, M. (2016) Low pressure injection molding of boron admixed 316l stainless steel for engineering applications. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 11960-11965. ISSN 18196608

Aslam, M. and Ahmad, F. and Yusoff, P.S.M.B.M. and Altaf, K. and Omar, M.A. and German, R.M. (2016) Powder injection molding of biocompatible stainless steel biodevices. Powder Technology, 295. pp. 84-95. ISSN 00325910

Altaf, K. and Rani, A.M.B.A. (2015) Numerical study of profiled conformal cooling channels for cooling time reduction in injection mould tools. International Journal of Engineering Systems Modelling and Simulation, 7 (4). pp. 230-237. ISSN 17559758

Ahmad, M.A.R. and Nasiruddin, Z.R. and Rao, T.V.V.L.N. and Altaf, K. (2014) Overcoming limitation in DFM using layer manufacturing. Applied Mechanics and Materials, 660. pp. 94-98. ISSN 16609336

Altaf, K. and Majdi Abdul Rani, A. and Raghavan, V.R. (2013) Prototype production and experimental analysis for circular and profiled conformal cooling channels in aluminium filled epoxy injection mould tools. Rapid Prototyping Journal, 19 (4). pp. 220-229. ISSN 13552546

Altaf, K. and Raghavan, V.R. and Rani, A.M.A. (2011) Comparative thermal analysis of circular and profiled cooling channels for injection mold tools. Journal of Applied Sciences, 11 (11). pp. 2068-2071. ISSN 18125654

Conference or Workshop Item

Altaf, K. and Majdi, A. and Rani, A. and Ahmad, F. and Ahmad, J. (2018) Enhanced polymer rapid tooling for metal injection moulding process. In: UNSPECIFIED.

Azam, F.I. and Abdul Rani, A.M. and Altaf, K. and Rao, T.V.V.L.N. and Zaharin, H.A. (2018) An In-Depth Review on Direct Additive Manufacturing of Metals. In: UNSPECIFIED.

Ali, S. and Rani, A.M.A. and Altaf, K. and Baig, Z. (2018) Investigation of Boron addition and compaction pressure on the compactibility, densification and microhardness of 316L Stainless Steel. In: UNSPECIFIED.

Qayyum, J.A. and Altaf, K. and Rani, A.M.A. and Ahmad, F. and Qadir, H.A. and Amin, W. (2018) Metal Injection Molding Process Parameters as A Function of Filling Performance of 3D Printed Polymer Mold. In: UNSPECIFIED.

Altaf, K. and Rani, A.M.A. and Ahmad, F. and Aslam, M. (2016) Rapid tooling for powder injection moulding process. In: UNSPECIFIED.

Ahmad, F. and Aslam, M. and Altaf, K. and Shirazi, I. (2015) Effects of mold geometry on fiber orientation of powder injection molded metal matrix composites. In: UNSPECIFIED.

Woldemichael, D.E. and Abdul Rani, A.M. and Lemma, T.A. and Altaf, K. (2015) Numerical simulation of rock cutting using 2D AUTODYN. In: UNSPECIFIED.

Altaf, K. and Rani, A.M.A. (2014) Thermal conductivity augmentation of epoxy injection moulds for cooling time reduction. In: UNSPECIFIED.

Altaf, K. and Rani, A.M.A. and Raghavan, V.R. (2011) Fabrication of circular and Profiled Conformal Cooling Channels in aluminum filled epoxy injection mould tools. In: UNSPECIFIED.