Article

Tabrez, M. and Ali Pasha, A. and Azeem Khan, W. and Hussain, I. and Ali, M. and Algarni, S. and Alqahtani, T. and Kareem, M.W. (2024) Bioconvection analysis for convectively heated radiative flow of Sutterby fluid involving efficacy of ferromagnetic nanoparticles. Thermal Science and Engineering Progress, 48.

Bhutto, S. and Abro, F.-U.-R. and Ali, M. and Buller, A.S. and Bheel, N. and Gamil, Y. and Najeh, T. and Deifalla, A.F. and Ragab, A.E. and Almujibah, H.R. (2024) Effect of banana tree leaves ash as cementitious material on the durability of concrete against sulphate and acid attacks. Heliyon, 10 (7).

Buller, A.S. and Abro, F.-U.-R. and Ali, M. and Ali, T. and Bheel, N. (2024) Effect of silica fume on fracture analysis, durability performance and embodied carbon of fiber-reinforced self-healed concrete. Theoretical and Applied Fracture Mechanics, 130. ISSN 01678442

Abdullah, G.M.S. and Chohan, I.M. and Ali, M. and Bheel, N. and Ahmad, M. and Najeh, T. and Gamil, Y. and Almujibah, H.R. (2024) Effect of titanium dioxide as nanomaterials on mechanical and durability properties of rubberised concrete by applying RSM modelling and optimizations. Frontiers in Materials, 11.

Bheel, N. and Kumar, S. and Kirgiz, M.S. and Ali, M. and Almujibah, H.R. and Ahmad, M. and Gonzalez-Lezcano, R.A. (2024) Effect of wheat straw ash as cementitious material on the mechanical characteristics and embodied carbon of concrete reinforced with coir fiber. Heliyon, 10 (2).

Shams, M.A. and Bheel, N. and Ali, M. and Ahmad, M. and Najeh, T. and Gamil, Y. and Almujibah, H.R. and Benjeddou, O. (2024) Fracture analysis of steel fibre-reinforced concrete using Finite element method modeling. Frontiers in Materials, 11.

Umer, A. and Ali, M. and Jehangiri, A.I. and Bilal, M. and Shuja, J. (2024) Multi-Objective Task-Aware Offloading and Scheduling Framework for Internet of Things Logistics. Sensors, 24 (8).

Nawaz, R. and Hanafiah, M.M. and Ali, M. and Anjum, M. and Baki, Z.A. and Mekkey, S.D. and Ullah, S. and Khurshid, S. and Ullah, H. and Arshad, U. (2024) Review of the performance and energy requirements of metals modified TiO2 materials based photocatalysis for phenolic compounds degradation: A case of agro-industrial effluent. Journal of Environmental Chemical Engineering, 12 (3).

Bin Abdullah, A.Z.A. and Muhammad, M.D. and Gilani, S.I.U.-H. and Ali, M. and Al-Kayiem, H.H. (2024) Thermal Analysis of Evacuated Tube Receiver for Solar Power Tower by Transient Simulation. Lecture Notes in Mechanical Engineering. pp. 147-160. ISSN 21954356

Ali, M. and Tang Jung, L. and Hassan Sodhro, A. and Ali Laghari, A. and Birahim Belhaouari, S. and Gillani, Z. (2023) A Confidentiality-based data Classification-as-a-Service (C2aaS) for cloud security. Alexandria Engineering Journal, 64. pp. 749-760.

Yekeen, N. and Ali Elakkari, A.M. and Khan, J.A. and Ali, M. and Al-Yaseri, A. and Hoteit, H. (2023) Experimental and Computational Fluid Dynamics Investigation of Mechanisms of Enhanced Oil Recovery via Nanoparticle-Surfactant Solutions. Energy and Fuels, 37 (7). pp. 5114-5129.

Yekeen, N. and Salampessy, S.N. and Abu Bakar, A.H. and Ali, M. and Okunade, O.A. and Musa, S.A. and Bavoh, C.B. (2023) Synthesis and pore-scale visualization studies of enhanced oil recovery mechanisms of rice straw silica nanoparticles. Journal of Petroleum Science and Engineering, 221.

Chohan, I.M. and Ahmad, A. and Sallih, N. and Bheel, N. and Ali, M. and Deifalla, A.F. (2023) A review on life cycle assessment of different pipeline materials. Results in Engineering, 19.

Tao, W. and Aghaabbasi, M. and Ali, M. and Almaliki, A.H. and Zainol, R. and Almaliki, A.A. and Hussein, E.E. (2022) An Advanced Machine Learning Approach to Predicting Pedestrian Fatality Caused by Road Crashes: A Step toward Sustainable Pedestrian Safety. Sustainability (Switzerland), 14 (4). ISSN 20711050

Zhu, L. and Ali, M. and Macioszek, E. and Aghaabbasi, M. and Jan, A. (2022) Approaching Sustainable Bike-Sharing Development: A Systematic Review of the Influence of Built Environment Features on Bike-Sharing Ridership. Sustainability (Switzerland), 14 (10). ISSN 20711050

Khan, M.I. and Sutanto, M.H. and Yusoff, N.I.M. and Zoorob, S.E. and Rafiq, W. and Ali, M. and Fediuk, R. and Vatin, N.I. (2022) Cementitious Grouts for Semi-Flexible Pavement Surfaces�A Review. Materials, 15 (15). ISSN 19961944

Ali, M. and Khan, M.I. and Masood, F. and Alsulami, B.T. and Bouallegue, B. and Nawaz, R. and Fediuk, R. (2022) Central composite design application in the optimization of the effect of waste foundry sand on concrete properties using RSM. Structures, 46. pp. 1581-1594. ISSN 23520124

Yekeen, N. and Al-Yaseri, A. and Negash, B.M. and Ali, M. and Giwelli, A. and Esteban, L. and Sarout, J. (2022) Clay-hydrogen and clay-cushion gas interfacial tensions: Implications for hydrogen storage. International Journal of Hydrogen Energy, 47 (44). pp. 19155-19167. ISSN 03603199

Al-Mahbashi, N. and Kutty, S.R.M. and Jagaba, A.H. and Al-Nini, A. and Ali, M. and Saeed, A.A.H. and Ghaleb, A.A.S. and Rathnayake, U. (2022) Column Study for Adsorption of Copper and Cadmium Using Activated Carbon Derived from Sewage Sludge. Advances in Civil Engineering, 2022. ISSN 16878086

Hakro, M.R. and Kumar, A. and Almani, Z. and Ali, M. and Fediuk, R. and Klyuev, S. and Klyuev, A. and Sabitov, L. and Fathi, D. (2022) Compaction Characteristics and Permeability of Expansive Shale Stabilized with Locally Produced Waste Materials. Materials, 15 (6). ISSN 19961944

Yang, L. and Aghaabbasi, M. and Ali, M. and Jan, A. and Bouallegue, B. and Javed, M.F. and Salem, N.M. (2022) Comparative Analysis of the Optimized KNN, SVM, and Ensemble DT Models Using Bayesian Optimization for Predicting Pedestrian Fatalities: An Advance towards Realizing the Sustainable Safety of Pedestrians. Sustainability (Switzerland), 14 (17). ISSN 20711050

Alani, A.A. and Lesovik, R. and Lesovik, V. and Fediuk, R. and Klyuev, S. and Amran, M. and Ali, M. and de Azevedo, A.R.G. and Vatin, N.I. (2022) Demolition Waste Potential for Completely Cement-Free Binders. Materials, 15 (17). ISSN 19961944

Al-Yaseri, A. and Yekeen, N. and Ali, M. and Pal, N. and Verma, A. and Abdulelah, H. and Hoteit, H. and Sarmadivaleh, M. (2022) Effect of organic acids on CO2-rock and water-rock interfacial tension: Implications for CO2 geo-storage. Journal of Petroleum Science and Engineering, 214. ISSN 09204105

Alanazi, A. and Ali, M. and Bawazeer, S. and Yekeen, N. and Hoteit, H. (2022) Evaluation of cubic, PC-SAFT, and GERG2008 equations of state for accurate calculations of thermophysical properties of hydrogen-blend mixtures. Energy Reports, 8. pp. 13876-13899. ISSN 23524847

Ali, M. and Abbas, S. and de Azevedo, A.R.G. and Marvila, M.T. and Alqurashi, M. and Khan, M.I. and Rafiq, W. and Hussein, E.E. (2022) Experimental and analytical investigation on the confinement behavior of low strength concrete under axial compression. Structures, 36. pp. 303-313. ISSN 23520124

Ali, M. and Habib, M.F. and Ahmed Sheikh, N. and Akhter, J. and Gilani, S.I.U.H. (2022) Experimental investigation of an integrated absorption- solid desiccant air conditioning system. Applied Thermal Engineering, 203. ISSN 13594311

Lesovik, V. and Tolstoy, A. and Fediuk, R. and Amran, M. and Azevedo, A. and Ali, M. and Ali Mosaberpanah, M. and Asaad, M.A. (2022) Four-component high-strength polymineral binders. Construction and Building Materials, 316. ISSN 09500618

Tang, P. and Aghaabbasi, M. and Ali, M. and Jan, A. and Mohamed, A.M. and Mohamed, A. (2022) How Sustainable Is People�s Travel to Reach Public Transit Stations to Go to Work? A Machine Learning Approach to Reveal Complex Relationships. Sustainability (Switzerland), 14 (7). ISSN 20711050

Chen, Y. and Aghaabbasi, M. and Ali, M. and Anciferov, S. and Sabitov, L. and Chebotarev, S. and Nabiullina, K. and Sychev, E. and Fediuk, R. and Zainol, R. (2022) Hybrid bayesian network models to investigate the impact of built environment experience before adulthood on students� tolerable travel time to campus: Towards sustainable commute behavior. Sustainability (Switzerland), 14 (1). ISSN 20711050

Yekeen, N. and Khan, J.A. and Ali, M. and Elraies, K.A. and Okunade, O.A. and Ridha, S. and Al-Yaseri, A. (2022) Impact of nanoparticles�surfactant solutions on carbon dioxide and methane wettabilities of organic-rich shale and CO2/brine interfacial tension: Implication for carbon geosequestration. Energy Reports, 8. pp. 15669-15685. ISSN 23524847

Lesovik, V. and Tolstoy, A. and Fediuk, R. and Amran, M. and Ali, M. and de Azevedo, A.R.G. (2022) Improving the Performances of a Mortar for 3D Printing by Mineral Modifiers. Buildings, 12 (8). ISSN 20755309

Bheel, N. and keerio, M.A. and Kumar, A. and Shahzaib, J. and Ali, Z. and Ali, M. and sohu, S. (2022) An Investigation on Fresh and Hardened Properties of Concrete Blended with Rice Husk Ash as Cementitious Ingredient and Coal Bottom Ash as Sand Replacement Material. Silicon, 14 (2). pp. 677-688. ISSN 1876990X

Nafees, A. and Amin, M.N. and Khan, K. and Nazir, K. and Ali, M. and Javed, M.F. and Aslam, F. and Musarat, M.A. and Vatin, N.I. (2022) Modeling of mechanical properties of silica fume-based green concrete using machine learning techniques. Polymers, 14 (1). ISSN 20734360

Ma, T. and Aghaabbasi, M. and Ali, M. and Zainol, R. and Jan, A. and Mohamed, A.M. and Mohamed, A. (2022) Nonlinear Relationships between Vehicle Ownership and Household Travel Characteristics and Built Environment Attributes in the US Using the XGBT Algorithm. Sustainability (Switzerland), 14 (6). ISSN 20711050

Hakro, M.R. and Kumar, A. and Almani, Z. and Ali, M. and Aslam, F. and Fediuk, R. and Klyuev, S. and Klyuev, A. and Sabitov, L. (2022) Numerical Analysis of Piled�Raft Foundations on Multi�Layer Soil Considering Settlement and Swelling. Buildings, 12 (3). ISSN 20755309

Hakro, M.R. and Kumar, A. and Ali, M. and Habib, A.F. and de Azevedo, A.R.G. and Fediuk, R. and Sabri, M.M.S. and Salmi, A. and Awad, Y.A. (2022) Numerical Analysis of Shallow Foundations with Varying Loading and Soil Conditions. Buildings, 12 (5). ISSN 20755309

Birniwa, A.H. and Kehili, S. and Ali, M. and Musa, H. and Ali, U. and Kutty, S.R.M. and Jagaba, A.H. and Abdullahi, S.S. and Tag-Eldin, E.M. and Mahmud, H.N.M.E. (2022) Polymer-Based Nano-Adsorbent for the Removal of Lead Ions: Kinetics Studies and Optimization by Response Surface Methodology. Separations, 9 (11). ISSN 22978739

Fediuk, R. and Ali, M. (2022) Recyclable Materials for Ecofriendly Technology. Materials, 15 (20). ISSN 19961944

Masood, F. and Nor, N.B.M. and Nallagownden, P. and Elamvazuthi, I. and Saidur, R. and Alam, M.A. and Akhter, J. and Yusuf, M. and Mehmood, M. and Ali, M. (2022) A Review of Recent Developments and Applications of Compound Parabolic Concentrator-Based Hybrid Solar Photovoltaic/Thermal Collectors. Sustainability (Switzerland), 14 (9). ISSN 20711050

Amran, M. and Makul, N. and Fediuk, R. and Borovkov, A. and Ali, M. and Zeyad, A.M. (2022) A Review on Building Design as a Biomedical System for Preventing COVID-19 Pandemic. Buildings, 12 (5). ISSN 20755309

Xu, Z. and Aghaabbasi, M. and Ali, M. and Macioszek, E. (2022) Targeting Sustainable Transportation Development: The Support Vector Machine and the Bayesian Optimization Algorithm for Classifying Household Vehicle Ownership. Sustainability (Switzerland), 14 (17). ISSN 20711050

Dai, L. and Wu, X. and Zhou, M. and Ahmad, W. and Ali, M. and Sabri, M.M.S. and Salmi, A. and Ewais, D.Y.Z. (2022) Using Machine Learning Algorithms to Estimate the Compressive Property of High Strength Fiber Reinforced Concrete. Materials, 15 (13). ISSN 19961944

Farooqi, B.A. and Ahmad, M.R.B. and Ali, M. (2021) Analysis of interconnected configuration for penetration of distributed generation. International Journal of Advanced Technology and Engineering Exploration, 8 (74). pp. 1-11. ISSN 23945443

Ali, M. and Abbas, S. and Salah, B. and Akhter, J. and Saleem, W. and Haruna, S. and Room, S. and Abdulkadir, I. (2021) Article investigating optimal confinement behaviour of low-strength concrete through quantitative and analytical approaches. Materials, 14 (16). ISSN 19961944

Al-Yaseri, A. and Abdulelah, H. and Yekeen, N. and Ali, M. and Negash, B.M. and Zhang, Y. (2021) Assessment of CO2/shale interfacial tension. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 627. ISSN 09277757

Abdulelah, H. and Al-Yaseri, A. and Ali, M. and Giwelli, A. and Negash, B.M. and Sarmadivaleh, M. (2021) CO2/Basalt's interfacial tension and wettability directly from gas density: Implications for Carbon Geo-sequestration. Journal of Petroleum Science and Engineering, 204. ISSN 09204105

Qian, Y. and Aghaabbasi, M. and Ali, M. and Alqurashi, M. and Salah, B. and Zainol, R. and Moeinaddini, M. and Hussein, E.E. (2021) Classification of imbalanced travel mode choice to work data using adjustable svm model. Applied Sciences (Switzerland), 11 (24). ISSN 20763417

Dos Santos Barreto, E. and Vaz Stafanato, K. and Marvila, M.T. and Garcez De Azevedo, A.R. and Ali, M. and Lobo Pereira, R.M. and Monteiro, S.N. (2021) Clay ceramic waste as pozzolan constituent in cement for structural concrete. Materials, 14 (11). ISSN 19961944

Masood, F. and Nor, N.B.M. and Nallagownden, P. and Elamvazuthi, I. and Alam, M.A. and Yusuf, M. and Ali, M. and Akhter, J. and Mehmood, M. (2021) Dataset on the effect of receiver size and acceptance half-angle on the aperture width and height of compound parabolic concentrator for low-concentrating photovoltaic applications using RSM. Data in Brief, 39. ISSN 23523409

Masood, F. and Nallagownden, P. and Elamvazuthi, I. and Alam, M.A. and Ali, M. and Azeem, M. (2021) Design and Optical Performance Analysis of a Quasi-stationary Compound Parabolic Concentrator for Photovoltaic Applications. Lecture Notes in Mechanical Engineering. pp. 241-248. ISSN 21954356

Ahmad, S. and Shafiq, N. and Iqbal, H.W. and Ahmad, R.Z. and Abbas, Z. and Rehman, A.-U. and Ali, M. (2021) Effect of slag on chloride resistance of concrete. Lecture Notes in Civil Engineering, 132. pp. 365-374. ISSN 23662557

de Azevedo, A.R.G. and Marvila, M.T. and Ali, M. and Khan, M.I. and Masood, F. and Vieira, C.M.F. (2021) Effect of the addition and processing of glass polishing waste on the durability of geopolymeric mortars. Case Studies in Construction Materials, 15. ISSN 22145095

Akhter, J. and Gilani, S.I. and Al-Kayiem, H.H. and Mehmood, M. and Ali, M. and Ullah, B. and Alam, M.A. and Masood, F. (2021) Experimental Investigation of a Medium Temperature Single-Phase Thermosyphon in an Evacuated Tube Receiver Coupled With Compound Parabolic Concentrator. Frontiers in Energy Research, 9. ISSN 2296598X

Nafees, A. and Javed, M.F. and Musarat, M.A. and Ali, M. and Aslam, F. and Vatin, N.I. (2021) FE Modelling and Analysis of Beam Column Joint Using Reactive Powder Concrete. Crystals, 11 (11). ISSN 20734352

Kousar, R. and Ali, M. and Sheikh, N.A. and Gilani, S.I.U.H. and Khushnood, S. (2021) Holistic integration of multi-stage dew point counter flow indirect evaporative cooler with the solar-assisted desiccant cooling system: A techno-economic evaluation. Energy for Sustainable Development, 62. pp. 163-174. ISSN 09730826

Imran Khan, M. and Sutanto, M.H. and Napiah, M.B. and Zoorob, S.E. and Al-Sabaeei, A.M. and Rafiq, W. and Ali, M. and Memon, A.M. (2021) Investigating the mechanical properties and fuel spillage resistance of semi-flexible pavement surfacing containing irradiated waste PET based grouts. Construction and Building Materials, 304. ISSN 09500618

Musarat, M.A. and Alaloul, W.S. and Rabbani, M.B.A. and Ali, M. and Altaf, M. and Fediuk, R. and Vatin, N. and Klyuev, S. and Bukhari, H. and Sadiq, A. and Rafiq, W. and Farooq, W. (2021) Kabul river flow prediction using automated ARIMA forecasting: A machine learning approach. Sustainability (Switzerland), 13 (19). ISSN 20711050

Azeem, M. and Ya, H.H. and Alam, M.A. and Sultan, T.H. and Ali, M. and Sattar, M. and Ahmad, T. and Hatami, H. and Sadique, M.R. and Mokhtar, A.A. and Mustapha, M. and Khan, M.A. and Masood, F. (2021) Macroscale assessment of low-velocity impact on hybrid composite laminates Makroskalige Bewertung des Einflusses niedriger Aufprallgeschwindigkeit auf hybride Verbundlaminate. Materialwissenschaft und Werkstofftechnik, 52 (10). pp. 1101-1111. ISSN 09335137

Akhter, J. and Gilani, S.I. and Al-Kayiem, H.H. and Ali, M. (2021) Performance Evaluation of a Modified Compound Parabolic Concentrating Collector with Varying Concentration Ratio. Heat Transfer Engineering, 42 (13-14). pp. 1117-1131. ISSN 01457632

Memon, A.M. and Sutanto, M.H. and Napiah, M. and Yusoff, N.I.M. and Memon, R.A. and Al-Sabaeei, A.M. and Ali, M. (2021) Physicochemical, rheological and morphological properties of bitumen incorporating petroleum sludge. Construction and Building Materials, 297. ISSN 09500618

Ali, M. and Dharmowijoyo, D.B.E. and de Azevedo, A.R.G. and Fediuk, R. and Ahmad, H. and Salah, B. (2021) Time-use and spatio-temporal variables influence on physical activity intensity, physical and social health of travelers. Sustainability (Switzerland), 13 (21). ISSN 20711050

Ali, M. and de Azevedo, A.R.G. and Marvila, M.T. and Khan, M.I. and Memon, A.M. and Masood, F. and Almahbashi, N.M.Y. and Shad, M.K. and Khan, M.A. and Fediuk, R. and Timokhin, R. and Borovkov, A. and Haq, I.U. (2021) The influence of covid-19-induced daily activities on health parameters�a case study in malaysia. Sustainability (Switzerland), 13 (13). ISSN 20711050

Ali, A. and Ammar, M. and Mukhtar, A. and Ahmed, T. and Ali, M. and Waqas, M. and Amin, M.N. and Rasheed, A. (2020) 3D NiO nanowires@NiO nanosheets core-shell structures grown on nickel foam for high performance supercapacitor electrode. Journal of Electroanalytical Chemistry, 857. ISSN 15726657

Ali, M. and Room, S. and Khan, M.I. and Masood, F. and Ali Memon, R. and Khan, R. and Memon, A.M. (2020) Assessment of local earthen bricks in perspective of physical and mechanical properties using Geographical Information System in Peshawar, Pakistan. Structures, 28. pp. 2549-2561. ISSN 23520124

Ahmad, F. and Mohammad, M. and Muhsan, A.S. and Ali, M. and Naseer, A. and Aslam, M. and Malik, M.R.R. (2020) Effect of Thermal Cycling on Thermal Conductivity of Powder Injection Moulded MWCNT Reinforced Copper Matrix Composites. Lecture Notes in Mechanical Engineering. pp. 377-387. ISSN 21954356

Ahmad, W. and Ali, M. and Sheikh, N.A. and Akhtar, J. (2020) Effect of efficient multi-stage indirect evaporative cooling on performance of solar assisted desiccant air conditioning in different climatic zones. Heat and Mass Transfer/Waerme- und Stoffuebertragung, 56 (9). pp. 2725-2741. ISSN 09477411

Akhter, J. and Gilani, S.I. and Al-Kayiem, H.H. and Ali, M. and Masood, F. (2020) Experimental evaluation of thermophysical properties of oil-based titania nanofluids for medium temperature solar collectors Experimentelle Einschätzung der thermophysikalischen Eigenschaften von ölbasierten Titandioxid-Nanofluiden für Mitteltemperatur-Solarkollektoren. Materialwissenschaft und Werkstofftechnik, 51 (6). pp. 792-802. ISSN 09335137

Ali, M. and Ahmad, F. and Malik, M.R.R. and Niazi, A.R. (2020) Fabrication of high magnetic performance Fe�50Ni alloy by powder injection molding. Materials and Manufacturing Processes, 35 (14). pp. 1557-1566. ISSN 10426914

Ali, M. and Ahmad, F. (2020) Influence of powder loading on rheology and injection molding of Fe-50Ni feedstocks. Materials and Manufacturing Processes, 35 (5). pp. 579-589. ISSN 10426914

Qasim, U. and Ali, Z. and Nazir, M.S. and Ul Hassan, S. and Rafiq, S. and Jamil, F. and Al-Muhtaseb, A.H. and Ali, M. and Khan Niazi, M.B. and Ahmad, N.M. and Ullah, S. and Mukhtar, A. and Saqib, S. (2020) Isolation of Cellulose from Wheat Straw Using Alkaline Hydrogen Peroxide and Acidified Sodium Chlorite Treatments: Comparison of Yield and Properties. Advances in Polymer Technology, 2020. ISSN 07306679

Bou-Rabee, M. and Lodi, K.A. and Ali, M. and Ansari, M.F. and Tariq, M. and Sulaiman, S.A. (2020) One-month-ahead wind speed forecasting using hybrid AI model for coastal locations. IEEE Access, 8. pp. 198482-198493. ISSN 21693536

Khan, M.Y. and Ali, M. and Qaisar, S. and Naeem, M. and Chrysostomou, C. and Iqbal, M. (2020) Placement Optimization for Renewable Energy Sources: Ontology, Tools, and Wake Models. IEEE Access, 8. pp. 72781-72800. ISSN 21693536

Ali, M. and Jung, L.T. and Abdel-Aty, A.-H. and Abubakar, M.Y. and Elhoseny, M. and Ali, I. (2020) Semantic-k-NN algorithm: An enhanced version of traditional k-NN algorithm. Expert Systems with Applications, 151. ISSN 09574174

Ali, M. and Jung, L.T. and Hosam, O. and Wagan, A.A. and Shah, R.A. and Khayyat, M. (2020) A new text-based w-distance metric to find the perfect match between words. Journal of Intelligent and Fuzzy Systems, 38 (3). pp. 2661-2672. ISSN 10641246

Ali, M. and Ahmad, F. and Melor, P.S. and Yahya, N. and Altaf, K. and Omar, M.A. and Aslam, M. (2019) Binder removal by a two-stage debinding process for powder injection molding Fe-50Ni alloy parts. Materials Research Express, 6 (8). ISSN 20531591

Akhter, J. and Gilani, S.I. and Al-kayiem, H.H. and Ali, M. and Masood, F. (2019) Characterization and stability analysis of oil-based copper oxide nanofluids for medium temperature solar collectors Charakterisierung und Stabilitätsanalyse von ölbasierten Kupferoxid-Nanofluiden für Mitteltemperatursonnenkollektoren. Materialwissenschaft und Werkstofftechnik, 50 (3). pp. 311-319. ISSN 09335137

Ali, M. and Ahmad, F. and Melor, P.S. and Yasir, M. and Yahya, N. and Aslam, M. and Malik, M.R.R. (2019) Influence of powder loading on densification and microstructure of injection molded Fe-50Ni soft magnetic alloys Einfluss der Pulverbeladung auf die Verdichtung und das Gefüge spritzgegossener weichmagnetischer Fe-50Ni-Legierungen. Materialwissenschaft und Werkstofftechnik, 50 (3). pp. 274-282. ISSN 09335137

Akhter, J. and Gilani, S.I. and Al-Kayiem, H.H. and Ali, M. (2019) Optical performance analysis of single flow through and concentric tube receiver coupled with a modified CPC collector under different configurations. Energies, 12 (21). ISSN 19961073

Hussain, Z. and Khan, A. and Sultan, N. and Ali, M. and Naz, M.Y. and Saed, K. and Sulaiman, S.A. (2019) Thermo-chemical conversion of waste glass into non-vitreous porous material for adsorption application. Journal of Material Cycles and Waste Management, 21 (5). pp. 1132-1143. ISSN 14384957

Yasir, M. and Ahmad, F. and Melor, P.S. and Ullah, S. and Ali, M. (2019) The influence of fiber length and concentration on the thermal properties of basalt fiber reinforced intumescent coating. International Journal of Recent Technology and Engineering, 7 (6). pp. 898-901. ISSN 22773878

Ali, M. and Ahmad, F. (2019) A review of processing techniques for Fe-Ni soft magnetic materials. Materials and Manufacturing Processes, 34 (14). pp. 1580-1604. ISSN 10426914

Saad, S.A. and Shafiq, N. and Ali, M. and Osman, M.M. (2018) Analysis by means of surface response to chemical composition and pozzolanic reactivity of ultrafine treated rice husk ash (UFTRHA) as cementing additive material. International Journal of Engineering and Technology(UAE), 7 (4). pp. 342-346. ISSN 2227524X

Rehman, T.-U. and Ali, H.M. and Saieed, A. and Pao, W. and Ali, M. (2018) Copper foam/PCMs based heat sinks: An experimental study for electronic cooling systems. International Journal of Heat and Mass Transfer, 127. pp. 381-393. ISSN 00179310

Akhter, J. and Gilani, S.I. and Ali, M. and Gilani, S.Z.A. (2018) Design and optical modeling of a low-profile stationary concentrating solar collector for medium temperature heat supply. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-12). pp. 65-71. ISSN 21801843

Adnan, N. and Md Nordin, S. and bin Bahruddin, M.A. and Ali, M. (2018) How trust can drive forward the user acceptance to the technology? In-vehicle technology for autonomous vehicle. Transportation Research Part A: Policy and Practice, 118. pp. 819-836. ISSN 09658564

Qadar Chaudhary, G. and Ali, M. and Sheikh, N.A. and Gilani, S.I.U.H. and Khushnood, S. (2018) Integration of solar assisted solid desiccant cooling system with efficient evaporative cooling technique for separate load handling. Applied Thermal Engineering, 140. pp. 696-706. ISSN 13594311

Saad, S.A. and Shafiq, N. and Ali, M. (2018) PHYSICOCHEMICAL PROPERTIES AND POZZOLANIC PERFORMANCE OF ULTRAFINE TREATED RICE HUSK ASH (UFTRHA) AS ADDITIVE IN CONCRETE. Planning Malaysia, 16 (2). pp. 314-323. ISSN 16756215

Saad, S.A. and Shafiq, N. and Ali, M. (2018) Physicochemical properties and pozzolanic performance of ultrafine treated rice husk ash (uftrha) as additive in concrete. Planning Malaysia, 16 (2). pp. 285-292. ISSN 16756215

Naqvi, S.R. and Jamshaid, S. and Naqvi, M. and Farooq, W. and Niazi, M.B.K. and Aman, Z. and Zubair, M. and Ali, M. and Shahbaz, M. and Inayat, A. and Afzal, W. (2018) Potential of biomass for bioenergy in Pakistan based on present case and future perspectives. Renewable and Sustainable Energy Reviews, 81. pp. 1247-1258. ISSN 13640321

Khan, A. and Ali, M. and Ilyas, A. and Naik, P. and Vankelecom, I.F.J. and Gilani, M.A. and Bilad, M.R. and Sajjad, Z. and Khan, A.L. (2018) ZIF-67 filled PDMS mixed matrix membranes for recovery of ethanol via pervaporation. Separation and Purification Technology, 206. pp. 50-58. ISSN 13835866

Ali, M. and Yaacob, R.A.I.R. and Endut, M.N.A.-A. and Sulam, M. (2018) The influence of contents utility on students' use of social media. Pertanika Journal of Social Sciences and Humanities, 26 (Januar). pp. 93-110. ISSN 01287702

Adnan, N. and Nordin, S.M. and Ali, M. (2018) A solution for the sunset industry: Adoption of Green Fertiliser Technology amongst Malaysian paddy farmers. Land Use Policy, 79. pp. 575-584. ISSN 02648377

Ali, M. and Khan, S.A. and Sheikh, N.A. and Gilani, S.I.-U.-H. and Shehryar, M. and Ali, H.M. and Rashid, T.U. (2017) Performance analysis of a low capacity solar tower water heating system in climate of Pakistan. Energy and Buildings, 143. pp. 84-99. ISSN 03787788

Gilani, S.I.-U. and Khan, M.H. and Ali, M. (2016) Revisiting Fanger's thermal comfort model using mean blood pressure as a bio-marker: An experimental investigation. Applied Thermal Engineering, 109. pp. 35-43. ISSN 13594311

Abid, S.A. and Othman, M. and Shah, N. and Sabir, O. and Khan, A.U.R. and Ali, M. and Shafi, J. and Ullah, S. (2015) Merging of DHT-based logical networks in MANETs. Transactions on Emerging Telecommunications Technologies, 26 (12). pp. 1347-1367. ISSN 21615748

Khan, H. and Daraz, N. and Khan, M.N. and Said, M. and Akhtar, N. and Badshah, A. and Khan, A.S. and Ali, M. (2014) Synthesis, Structural Characterization, and Evaluation of the Biological Properties of Heteroleptic Palladium(II) Complexes. Bioinorganic Chemistry and Applications, 2014. ISSN 15653633

Samer, A. and Ali, M. and Basu, P. and Ahmad, F. (2014) Wear resistance of Al-12Si alloys by reinforcing TiC and TiN particles. Journal of Engineering Mechanics, 140 (6). ISSN 07339399

Ali, M. and Jaafar, A.N. and Kamaruddin, I. and Rahman, H.A. (2012) Construction quality of school buildings using the industrialised building systEM (IBS). Malaysian Construction Research Journal, 11 (2). pp. 21-35. ISSN 19853807

Conference or Workshop Item

Tariq, Z. and Ali, M. and Yan, B. and Sun, S. and Khan, M. and Yekeen, N. and Hoteit, H. (2023) Data-Driven Machine Learning Modeling of Mineral/CO2/Brine Wettability Prediction: Implications for CO2 Geo-Storage. In: UNSPECIFIED.

Tanjung, L.E. and Dharmowijoyo and Yurnalis, F. and Hartieni, P. and Wicaksono, A. and Puri, A. and Ali, M. (2023) The impact of activity travel participation on the individual's mental and social health. In: UNSPECIFIED.

Room, S. and Ali, M. and Alam, M.A. and Khan, U. and Ammad, S. and Saad, S. (2021) Assessment of Lightweight Aggregate Concrete Using Textile Washing Stone. In: UNSPECIFIED.

Ammad, S. and Alaloul, W.S. and Saad, S. and Altaf, M. and Alawag, A.M. and Ali, M. (2021) Building Information Modelling (BIM) and Occupational Safety in Infrastructure Projects. In: UNSPECIFIED.

Ali, M. and Masood, F. and Khan, M.I. and Azeem, M. and Qasim, M. and Ali, F.N. (2021) Evaluation of flexible pavement distresses-A Case Study of Northern Bypass Peshawar, Pakistan. In: UNSPECIFIED.

Puri, A. and Oktavia, F. and Dharmowijoyo, D.B.E. and Ali, M. (2021) Prediction of Deflection of Single-pile Nailed-slab by Using the Allowable Equivalent Modulus of Subgrade Reaction in Case of Additional Modulus from Modified Hardiyatmo Method. In: UNSPECIFIED.

Ali, M. and Abbas, S. and Khan, M.I. and Anwar Gad, M. and Ammad, S. and Khan, A. (2020) Experimental Validation of Mander's Model for Low Strength Confined Concrete under Axial Compression. In: UNSPECIFIED.

Gad, M.A. and Riad, A.M. and Nikbakht, E. and Ali, M. and Ghanem, G.M. (2020) Structural Behavior of Slender Reinforced Concrete Columns Wrapped with Fiber Reinforced Polymers Subjected to Eccentric Loads. In: UNSPECIFIED.

Ali, M. and Ahmad, F. and Melor, P.S. and Yahya, N. and Aslam, M. (2019) Investigation of boron effect on the densification of Fe-50Ni soft magnetic alloys produced by powder metallurgy route. In: UNSPECIFIED.

Saad, S.A. and Nuruddin, M.F. and Shafiq, N. and Ali, M. (2016) The Effect of Incineration Temperature to the Chemical and Physical Properties of Ultrafine Treated Rice Husk Ash (UFTRHA) as Supplementary Cementing Material (SCM). In: UNSPECIFIED.

Nuruddin, M.F. and Saad, S.A. and Shafiq, N. and Ali, M. (2016) Milling time influence of ultrafine treated rice husk ash to pozzolanic reactivity in portlandite. In: UNSPECIFIED.

Ali, M. and Jung, L.T. (2015) Confidentiality based file attributes and data classification using TsF-KNN. In: UNSPECIFIED.

Hashmet, M.R. and Demiral, B.M.R. and Ali, M. and Kashif, M. (2011) Rheology of enhanced oil recovery polymers-a review. In: UNSPECIFIED.

Book

Naseer, H. and Gilani, S.I.U. and Al-Kayiem, H.H. and Ali, M. (2023) The transition of solar thermal energy in recent years and future directions for industrial utilization. Nova Science Publishers, Inc., pp. 189-216. ISBN 9798886977097; 9798886977097