Article

Marode, R.V. and Awang, M. and Lemma, T.A. and Pedapati, S.R. and Hassan, A. and Janga, V.S.R. and Alam, M.A. and Loyte, A. and Devarajan, Y. (2024) Friction stir processing of AZ91 hybrid composites with exfoliated multi-layered graphene: A Taguchi-Grey relational analysis. Journal of Alloys and Compounds, 972.

Islam, M.T. and Alam, M.A. and Lipu, M.S.H. and Rahman, M.S. and Rahman, M.F. and Ashique, R.H. and Radoan, M. and Masaoud, A. (2024) Harmonics Minimization of Symmetric Five-Level Inverter Using Improved LSF Modulation Scheme. IEEE Access, 12. pp. 62526-62542. ISSN 21693536

Azeem, M. and Ya, H.H. and Alam, M.A. and Muhammad, M. and M Sapuan, S. and Kumar, M. and Gemi, L. and Maziz, A. and Ismail, A.R. and Khan, S.H. (2024) Impact response of filament-wound structure with polymeric liner: Experimental and numerical investigation (Part-A). Results in Engineering, 21.

Ahmed, T. and Ya, H.H. and Alam, M.A. and Azeem, M. and Khan, M.R. and Sapuan, S.M. and Yusuf, M. and Afridi, J. (2024) Tribological and morphological properties of bentonite nano-clay/CaCO3 reinforced high-density polyethylene nanocomposites. Polymer Composites, 45 (3). pp. 2063-2079.

Alam, M.A. and Ya, H.B. and Azeem, M. and Mustapha, M. and Yusuf, M. and Masood, F. and Marode, R.V. and Sapuan, S.M. and Ansari, A.H. (2023) Advancements in aluminum matrix composites reinforced with carbides and graphene: A comprehensive review. Nanotechnology Reviews, 12 (1).

Soomro, I.A. and Pedapati, S.R. and Awang, M. and Alam, M.A. (2023) Effects of double pulse welding on microstructure, texture, and fatigue behavior of DP590 steel resistance spot weld. International Journal of Advanced Manufacturing Technology, 125 (3-4). pp. 1271-1287.

Alam, M.A. and Ya, H.H. and Qistina, N.A. and Azeem, M. and Mustapha, M. and Yusuf, M. and Masood, F. and Khan, R. and Ahmad, T. (2023) Investigating the Microhardness Behavior of Al6061/TiC Surface Composites Produced by Friction Stir Processing. International Journal of Computational Methods and Experimental Measurements, 11 (3). pp. 157-161.

Islam, M.T. and Alam, M.A. and Lipu, M.S.H. and Hasan, K. and Meraj, S.T. and Masrur, H. and Rahman, M.F. (2023) A Single DC Source Five-Level Switched Capacitor Inverter for Grid-Integrated Solar Photovoltaic System: Modeling and Performance Investigation. Sustainability (Switzerland), 15 (10).

Soni, A. and Das, P.K. and Yusuf, M. and Ridha, S. and Kamyab, H. and Alam, M.A. and Masood, F. and Chelliapan, S. and Ubaidullah, M. and Pandit, B. and Prakash, C. (2023) Synergy of silica sand and waste plastics as thermoplastic composites on abrasive wear characteristics under conditions of different loads and sliding speeds. Chemosphere, 323.

Alam, M.A. and Ya, H.H. and Azeem, M. and Yusuf, M. and Soomro, I.A. and Masood, F. and Shozib, I.A. and Sapuan, S.M. and Akhter, J. (2022) Artificial Neural Network Modeling to Predict the Effect of Milling Time and TiC Content on the Crystallite Size and Lattice Strain of Al7075-TiC Composites Fabricated by Powder Metallurgy. Crystals, 12 (3). ISSN 20734352

Khan, R. and Ya, H.H. and Shah, I. and Niazi, U.M. and Ahmed, B.A. and Irfan, M. and Glowacz, A. and Pilch, Z. and Brumercik, F. and Azeem, M. and Alam, M.A. and Ahmed, T. (2022) Influence of Elbow Angle on Erosion-Corrosion of 1018 Steel for Gas�Liquid�Solid Three Phase Flow. Materials, 15 (10). ISSN 19961944

Soomro, I.A. and Pedapati, S.R. and Awang, M. and Soomro, A.A. and Alam, M.A. and Bhayo, B.A. (2022) Optimization and Modelling of Resistance Spot Welding Process Parameters for Quality Improvement Using Taguchi Method and Artificial Neural Network. Iranian Journal of Materials Science and Engineering, 19 (4). pp. 1-10. ISSN 17350808

Yusuf, M. and Farooqi, A.S. and Alam, M.A. and Keong, L.K. and Hellgardt, K. and Abdullah, B. (2022) Response surface optimization of syngas production from greenhouse gases via DRM over high performance Ni�W catalyst. International Journal of Hydrogen Energy, 47 (72). pp. 31058-31071. ISSN 03603199

Masood, F. and Nallagownden, P. and Elamvazuthi, I. and Akhter, J. and Alam, M.A. (2022) A Review of Artificial Intelligence-Based Techniques to Estimate Atmospheric Parameters Influencing the Performance of Concentrating Photovoltaic/Thermal Systems. Lecture Notes in Electrical Engineering, 758. pp. 365-372. ISSN 18761100

Masood, F. and Nor, N.B.M. and Nallagownden, P. and Elamvazuthi, I. and Saidur, R. and Alam, M.A. and Akhter, J. and Yusuf, M. and Mehmood, M. and Ali, M. (2022) A Review of Recent Developments and Applications of Compound Parabolic Concentrator-Based Hybrid Solar Photovoltaic/Thermal Collectors. Sustainability (Switzerland), 14 (9). ISSN 20711050

Masood, F. and Nor, N.B.M. and Elamvazuthi, I. and Saidur, R. and Alam, M.A. and Akhter, J. and Yusuf, M. and Ali, S.M. and Sattar, M. and Baba, M. (2022) The compound parabolic concentrators for solar photovoltaic applications: Opportunities and challenges. Energy Reports, 8. pp. 13558-13584. ISSN 23524847

Sattar, M. and Othman, A.R. and Kamaruddin, S. and Alam, M.A. and Azeem, M. (2021) Creep parameters determination by omega model to norton bailey law by regression analysis for austenitic steel ss-304. Solid State Phenomena, 324 SS. pp. 188-197. ISSN 10120394

Sattar, M. and Othman, A.R. and Akhtar, M. and Kamaruddin, S. and Khan, R. and Masood, F. and Alam, M.A. and Azeem, M. and Mohsin, S. (2021) Curve fitting for damage evolution through regression analysis for the kachanov�rabotnov model to the norton�bailey creep law of ss-316 material. Materials, 14 (19). ISSN 19961944

Masood, F. and Nor, N.B.M. and Nallagownden, P. and Elamvazuthi, I. and Alam, M.A. and Yusuf, M. and Ali, M. and Akhter, J. and Mehmood, M. (2021) Dataset on the effect of receiver size and acceptance half-angle on the aperture width and height of compound parabolic concentrator for low-concentrating photovoltaic applications using RSM. Data in Brief, 39. ISSN 23523409

Masood, F. and Nallagownden, P. and Elamvazuthi, I. and Alam, M.A. and Ali, M. and Azeem, M. (2021) Design and Optical Performance Analysis of a Quasi-stationary Compound Parabolic Concentrator for Photovoltaic Applications. Lecture Notes in Mechanical Engineering. pp. 241-248. ISSN 21954356

Akhter, J. and Gilani, S.I. and Al-Kayiem, H.H. and Mehmood, M. and Ali, M. and Ullah, B. and Alam, M.A. and Masood, F. (2021) Experimental Investigation of a Medium Temperature Single-Phase Thermosyphon in an Evacuated Tube Receiver Coupled With Compound Parabolic Concentrator. Frontiers in Energy Research, 9. ISSN 2296598X

Alam, M.A. and Ya, H.H. and Azeem, M. and Yusuf, M. and Sapuan, S.M. and Masood, F. (2021) Investigating the effect of mixing time on the crystallite size and lattice strain of the AA7075/TiC composites Einfluss der Mischzeit auf die Kristallitgrö�e und die Gitterverzerrung von AA7075/TiC-Verbundwerkstoffen. Materialwissenschaft und Werkstofftechnik, 52 (10). pp. 1112-1120. ISSN 09335137

Azeem, M. and Ya, H.H. and Alam, M.A. and Sultan, T.H. and Ali, M. and Sattar, M. and Ahmad, T. and Hatami, H. and Sadique, M.R. and Mokhtar, A.A. and Mustapha, M. and Khan, M.A. and Masood, F. (2021) Macroscale assessment of low-velocity impact on hybrid composite laminates Makroskalige Bewertung des Einflusses niedriger Aufprallgeschwindigkeit auf hybride Verbundlaminate. Materialwissenschaft und Werkstofftechnik, 52 (10). pp. 1101-1111. ISSN 09335137

Alam, M.A. and Ya, H.H. and Yusuf, M. and Sivraj, R. and Mamat, O.B. and Sapuan, S.M. and Masood, F. and Parveez, B. and Sattar, M. (2021) Modeling, optimization and performance evaluation of tic/graphite reinforced al 7075 hybrid composites using response surface methodology. Materials, 14 (16). ISSN 19961944

Shozib, I.A. and Ahmad, A. and Rahaman, M.S.A. and Abdul-Rani, A.M. and Alam, M.A. and Beheshti, M. and Taufiqurrahman, I. (2021) Modelling and optimization of microhardness of electroless Ni-P-TiO2composite coating based on machine learning approaches and RSM. Journal of Materials Research and Technology, 12. pp. 1010-1025. ISSN 22387854

Yusuf, M. and Farooqi, A.S. and Ying, Y.X. and Keong, L.K. and Alam, M.A. and Hellgardt, K. and Abdullah, B. (2021) Syngas production employing nickel on alumina-magnesia supported catalyst via dry methane reforming Synthesegasherstellung unter Verwendung von Nickel auf Aluminium-Magnesium unterstütztem Katalysator durch Trockenreformierung von Methan. Materialwissenschaft und Werkstofftechnik, 52 (10). pp. 1090-1100. ISSN 09335137

Yusuf, M. and Farooqi, A.S. and Al-Kahtani, A.A. and Ubaidullah, M. and Alam, M.A. and Keong, L.K. and Hellgardt, K. and Abdullah, B. (2021) Syngas production from greenhouse gases using Ni�W bimetallic catalyst via dry methane reforming: Effect of W addition. International Journal of Hydrogen Energy, 46 (53). pp. 27044-27061. ISSN 03603199

Masood, F. and Nallagownden, P. and Elamvazuthi, I. and Akhter, J. and Alam, M.A. (2021) A new approach for design optimization and parametric analysis of symmetric compound parabolic concentrator for photovoltaic applications. Sustainability (Switzerland), 13 (9). ISSN 20711050

Khan, R. and Ya, H.H. and Pao, W. and Majid, M.A.A. and Ahmed, T. and Ahmad, A. and Alam, M.A. and Azeem, M. and Iftikhar, H. (2020) Effect of sand fines concentration on the erosion-corrosion mechanism of carbon steel 90� elbow pipe in slug flow. Materials, 13 (20). pp. 1-16. ISSN 19961944

Alam, M.A. and Ya, H.H. and Hussain, P.B. and Azeem, M. and Sapuan, S.M. and khan, R. and Ahamad, T. (2020) Experimental investigations on the surface hardness of synthesized polystyrene/zno nanocomposites. Lecture Notes in Mechanical Engineering. pp. 345-352. ISSN 21954356

Alam, M.A. and Ya, H.H. and Azeem, M. and Hussain, P.B. and Salit, M.S.B. and Khan, R. and Arif, S. and Ansari, A.H. (2020) Modelling and optimisation of hardness behaviour of sintered Al/SiC composites using RSM and ANN: A comparative study. Journal of Materials Research and Technology, 9 (6). pp. 14036-14050. ISSN 22387854

Ahmed, T. and Ya, H.H. and Mahadzir, S. and Khan, R. and Alam, M.A. (2020) An overview: Mechanical and wear properties of hdpe polymer nanocomposites reinforced with treated/non-treated inorganic nanofillers. Lecture Notes in Mechanical Engineering. pp. 231-241. ISSN 21954356

Conference or Workshop Item

Alam, M.A. and Ya, H.H. and Gerewal, L. and Azeem, M. and Masood, F. and Yusuf, M. and Ahmad, T. and Khan, M.R. and Shozib, I.A. (2024) Evaluation on the impact behavior of stir-casted Aluminum composites reinforced with SiC and Gr for lightweight applications. In: UNSPECIFIED.

Room, S. and Ali, M. and Alam, M.A. and Khan, U. and Ammad, S. and Saad, S. (2021) Assessment of Lightweight Aggregate Concrete Using Textile Washing Stone. In: UNSPECIFIED.

Masood, F. and Nallagownden, P.A.-L. and Elamvazuthi, I. and Akhter, J. and Alam, M.A. and Yusuf, M. (2021) Design and Parametric Analysis of Compound Parabolic Concentrator for Photovoltaic Applications. In: UNSPECIFIED.

Yusuf, M. and Bazli, L. and Alam, M.A. and Masood, F. and Keong, L.K. and Noor, A. and Hellgardt, K. and Abdullah, B. (2021) Hydrogen production via natural gas reforming: A comparative study between DRM, SRM and BRM techniques. In: UNSPECIFIED.

Alam, M.A. and Ya, H.H. and Ahmad, A. and Yusuf, M. and Azeem, M. and Masood, F. (2021) Influence of aluminum addition on the mechanical properties of brass/Al composites fabricated by stir casting. In: UNSPECIFIED.

Raheem, A. and Khan, R. and Mazhar, A.R. and Ya, H.H. and Alam, M.A. and Ahmed, T. and Azeem, M. (2021) A Review of Recent Studies of Dynamometers for Cutting Force Measurement in Machining Processes. In: UNSPECIFIED.

Book

Raja, S. and Yusof, F. and Muhamad, R.B. and Jamaludin, M.F. and Khan, M.F. and Shaikh, M.B.N. and Arif, S. and Alam, M.A. (2024) Surface Modification of Mg Alloys: An Insight into Friction Stir-Based Techniques. CRC Press, pp. 124-146. ISBN 9781040016602; 9781032508818

Asyraf, M.R.M. and Ilyas, R.A. and Sapuan, S.M. and Harussani, M.M. and Hariz, H.M. and Aiman, J.M. and Baitaba, D.M. and Sanjay, M.R. and Ishak, M.R. and Mazlan, N. and Sharma, S. and Alam, M.A. and Asrofi, M. (2022) Advanced Composite in Aerospace Applications: Opportunities, Challenges, and Future Perspective. Springer International Publishing, pp. 471-498. ISBN 9783030881924; 9783030881917

Alam, M.A. and Ya, H.H. and Sapuan, S.M. and Mamat, O. and Parveez, B. and Yusuf, M. and Masood, F. and Ilyas, R.A. (2022) Recent Advancements in Advanced Composites for Aerospace Applications: A Review. Springer International Publishing, pp. 319-339. ISBN 9783030881924; 9783030881917

Alam, M.A. and Sapuan, S.M. and Ya, H.H. and Hussain, P.B. and Azeem, M. and Ilyas, R.A. (2020) Application of biocomposites in automotive components: A review. Elsevier, pp. 1-17. ISBN 9780128205594