Article

Ahmed, I. and Ahmad, A. and Abdul-Rani, A.M. and Tasnim, N. and Al-Amin, M. (2023) A Comparative Review of Surface Modification Technique Between Physical Vapor Deposition (PVD) and Plasma Electrolytic Oxidation (PEO) for Biomedical Applications. Lecture Notes in Mechanical Engineering. pp. 813-829. ISSN 21954356

Khan, M.S. and Lal, B. and Abulkhair, H. and Ahmed, I. and Shariff, A.M. and Almatrafi, E. and Alsaiari, A. and Bamaga, O. (2023) Formation Kinetics Evaluation for Designing Sustainable Carbon Dioxide-Based Hydrate Desalination via Tryptophan as a Biodegradable Hydrate Promotor. Sustainability (Switzerland), 15 (1).

Kumar, A. and Bheel, N. and Ahmed, I. and Rizvi, S.H. and Kumar, R. and Jhatial, A.A. (2022) Effect of silica fume and fly ash as cementitious material on hardened properties and embodied carbon of roller compacted concrete. Environmental Science and Pollution Research, 29 (1). pp. 1210-1222. ISSN 09441344

Awad, A. and Ahmed, I. and Qadir, D. and Khan, M.S. and Idris, A. (2021) Catalytic decomposition of 2 methanol in methane over metallic catalyst by fixed-bed catalytic reactor. Energies, 14 (8). ISSN 19961073

Khan, M.S. and Bavoh, C.B. and Foo, K.S. and Shariff, A.M. and Kassim, Z. and Othman, N.A.B. and Lal, B. and Ahmed, I. and Rahman, M.A. and Gomari, S.R. (2021) Kinetic behavior of quaternary ammonium hydroxides in mixed methane and carbon dioxide hydrates. Molecules, 26 (2). ISSN 14203049

Idris, A. and Man, Z. and Maulud, A.S. and Bustam, M.A. and Mannan, H.A. and Ahmed, I. (2020) Investigation on particle properties and extent of functionalization of silica nanoparticles. Applied Surface Science, 506. ISSN 01694332

Khan, M.S. and Lal, B. and Sabil, K.M. and Ahmed, I. (2019) Desalination of seawater through gas hydrate process: An overview. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 55 (1). pp. 65-73. ISSN 22897879

Khan, M.S. and Lal, B. and Keong, L.K. and Ahmed, I. (2019) Tetramethyl ammonium chloride as dual functional inhibitor for methane and carbon dioxide hydrates. Fuel, 236. pp. 251-263. ISSN 00162361

Hussain, A. and Abolaban, F. and Khubaib, S.M. and Mubin, S. and Ahmed, I. (2015) Steady state and transient thermalhydraulic analysis of PHWR using COBRA-3C/RERTR. Iranian Journal of Science and Technology - Transactions of Mechanical Engineering, 39. pp. 233-242. ISSN 22286187

Yusof, Z.A.M. and Ahmed, I. and Khan, M.S. and Hussain, S.A. and Hussain, A. and Mutalib, I.B.A. and Balkhair, K.S. and Albeirutty, M.H. (2015) Thermal Evaluation of Diesel/Hydrogen Peroxide Fuel Blend. Chemical Engineering and Technology, 38 (12). pp. 2170-2180. ISSN 09307516

Nadeem, S. and Ahmed, I. and Abdul Muttalib, I. and Tufail, M. and Khan, M.S. (2014) Citric acid future prospects for Pakistan, a short review. Applied Mechanics and Materials, 625. pp. 61-64. ISSN 16609336

Ahmed, I. and Idris, A. and Khan, M.S. and Chowdhury, S. and Akhtar, J. (2014) Effect of acetone on physical properties of PES membrane. Applied Mechanics and Materials, 625. pp. 545-548. ISSN 16609336

Chowdhury, S. and Leng, T.W. and Ahmed, I. and Bustam, A. and Shariff, A.M. (2014) Fine structural analysis of solvent activated Cu-BTC for carbon dioxide capture. Applied Mechanics and Materials, 625. pp. 209-212. ISSN 16609336

Ahmed, I. (2014) Preface. Applied Mechanics and Materials, 625. ISSN 16609336

Kazimi, M.R. and Shah, T. and Jamari, S.S.B. and Ahmed, I. and Faizal, C.K.M. (2014) Sulfonation of low-density polyethylene and its impact on polymer properties. Polymer Engineering and Science, 54 (11). pp. 2522-2530. ISSN 00323888

Shakaib, M. and Hasani, S.M.F. and Ehtesham-ul Haque, M. and Ahmed, I. and Yunus, R.M. (2013) A CFD study of heat transfer through spacer channels of membrane distillation modules. Desalination and Water Treatment, 51 (16-18). pp. 3662-3674. ISSN 19443994

Hussain, A. and Ahmed, I. and Sait, H.H. and Bassyouni, M.I. and Hegab, A.M. and Ul Hasan, S.W. and Nasir Ani, F. (2013) Experimental and simulation study of fluidization behavior of palm biomass in a circulating fluidized bed riser. Industrial and Engineering Chemistry Research, 52 (49). pp. 17529-17537. ISSN 08885885

Ahmed, I. and Idris, A. and Hussain, A. and Yusof, Z.A.M. and Saad Khan, M. (2013) Influence of co-solvent concentration on the properties of dope solution and performance of polyethersulfone membranes. Chemical Engineering and Technology, 36 (10). pp. 1683-1690. ISSN 09307516

Shakaib, M. and Ahmed, I. and Yunus, R.M. and Idris, A. and Hussain, A. (2013) Influence of monosodium glutamate additive on the morphology and permeability characteristics of polyamide dialysis membranes. Journal of Applied Polymer Science, 128 (5). pp. 3346-3355. ISSN 00218995

Shakaib, M. and Ahmed, I. and Yunus, R.M. and Idris, A. (2013) Morphology and thermal characteristics of polyamide/monosodium glutamate membranes. International Journal of Polymeric Materials and Polymeric Biomaterials, 62 (6). pp. 345-350. ISSN 00914037

Conference or Workshop Item

Khan, M.S. and Ahmed, I. and Lal, B. and Idris, A.-A. and Albeirutty, M.H. and Ayoub, M. and Sufian, S.B. (2018) Physicochemical and FTIR Study of Diesel-Hydrogen Peroxide Fuel Blend. In: UNSPECIFIED.

Idris, A. and Man, Z.B. and Maulud, A. and Ahmed, I. (2016) Modified Higuchi Model Applied to Permeation Prediction of Nanocomposite Membranes. In: UNSPECIFIED.

Book

Leam, J.J. and Bilad, M.R. and Wibisono, Y. and Wirzal, M.D.H. and Ahmed, I. (2019) Membrane technology for microalgae harvesting. Elsevier, pp. 97-110. ISBN 9780128175361

Usmani, M.A. and Khan, I. and Md Nayeem, S. and Mondal, D. and Bhat, A.H. and Ahmed, I. and Haque, A. (2017) Biomass nanofibrillar cellulose in nanocomposites. Elsevier Inc., pp. 305-326. ISBN 9780081009659; 9780081009574