Article

Gul, I.A. and Abdul Rani, A.M. and Al-Amin, M. and Danish, M. and Rubaiee, S. and Ahmed, A. and Zhang, C. (2024) Investigating surface integrity, corrosion resistance and biocompatibility of 316L steel using carbon nanotube-assisted EDM process. Results in Engineering, 21.

Al-Amin, M. and Danish, M. and Rubaiee, S. and Ahmed, A. and Abdul-Rani, A.M. and Mannan, A. and Yildirim, M.B. (2023) Improvement in 316L steel surface features, corrosion and biocompatibility through novel CNT-assisted hydroxyapatite powder mixed-EDM process. Applied Physics A: Materials Science and Processing, 129 (7).

Danish, M. and Al-Amin, M. and Rubaiee, S. and Parameswari, R.P. and Abdul-Rani, A.M. and Ahmed, A. and Yildirim, M.B. (2023) Investigation of coated 316L steel surface employing carbon nanotubes mixed-electrical discharge machining for biomedical applications. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.

Danish, M. and Al-Amin, M. and Rubaiee, S. and Gul, I.A. and Ahmed, A. and Rahman, M.O. and Zhang, C. and Yildirim, M.B. (2023) Investigation of coated 316L steel surface: Surface morphology, composition, corrosion, and biocompatibility using hydroxyapatite mixed-EDM process. Surface and Coatings Technology, 467.

Danish, M. and Al-Amin, M. and Abdul-Rani, A.M. and Rubaiee, S. and Ahmed, A. and Zohura, F.T. and Ahmed, R. and Yildirim, M.B. (2023) Optimization of hydroxyapatite powder mixed electric discharge machining process to improve modified surface features of 316L stainless steel. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 237 (3). pp. 881-895.

Hussain, M. and Ali, O. and Raza, N. and Zabiri, H. and Ahmed, A. and Ali, I. (2023) Recent advances in dynamic modeling and control studies of biomass gasification for production of hydrogen rich syngas. RSC Advances, 13 (34). pp. 23796-23811.

Hakimi, M.H. and Gharib, A.F. and Abidin, N.S.Z. and Ahmed, A. and Nady, M.M.E. and Yahya, M.M.A. and Lashin, A.A. (2022) Biomarker and Carbon Isotope Composition of the Oil Stains from the North Hadramaut High Area of Eastern Yemen: Implications on the Nature of Organic Matter Input and Their Characteristics. Arabian Journal for Science and Engineering, 47 (1). pp. 709-723. ISSN 2193567X

Danish, M. and Al-Amin, M. and Rubaiee, S. and Abdul-Rani, A.M. and Zohura, F.T. and Ahmed, A. and Ahmed, R. and Yildirim, M.B. (2022) Enhanced machining features and multi-objective optimization of CNT mixed-EDM process for processing 316L steel. International Journal of Advanced Manufacturing Technology, 120 (9-10). pp. 6125-6141. ISSN 02683768

Hakimi, M.H. and Gharib, A.F. and Alqudah, M. and Ahmed, A. and Hatem, B.A. and Mustapha, K.A. and Abidin, N.S.Z. and Lashin, A. and Yelwa, N.A. and Alqubalee, A.M. (2022) Geochemistry and organofacies characteristics of organic-rich chalky marl deposits, northern Jordan: Insights into Type II-S source rock. Journal of Asian Earth Sciences, 225. ISSN 13679120

Maqsood, K. and Ali, A. and Nasir, R. and Abdulrahman, A. and Mahfouz, A.B. and Ahmed, A. and Shariff, A.B.M. and Ganguly, S. and Mubashir, M. and Show, P.L. (2021) Experimental and simulation study on high-pressure V-L-S cryogenic hybrid network for CO2 capture from highly sour natural gas. Process Safety and Environmental Protection, 150. pp. 36-50. ISSN 09575820

Ali, A. and Ilyas, S.U. and Danish, M. and Abdulrahman, A. and Maqsood, K. and Ahmed, A. and Murshid, G. and Rubaiee, S. and Alsaady, M. and Mahfouz, A.B. and Hanbazazah, A.S. (2021) Multi-objective optimization of thermophysical properties of f�Al2O3 nano-dispersions in heat transfer oil. SN Applied Sciences, 3 (2). ISSN 25233971

Raza, M. and Inayat, A. and Ahmed, A. and Jamil, F. and Ghenai, C. and Naqvi, S.R. and Shanableh, A. and Ayoub, M. and Waris, A. and Park, Y.-K. (2021) Progress of the pyrolyzer reactors and advanced technologies for biomass pyrolysis processing. Sustainability (Switzerland), 13 (19). ISSN 20711050

Algamili, A. and Ahmed, A. and Dennis, J. and Khir, M. and Mutharpavalar, A. (2020) Analytical modelling of the effect of squeeze film damping on the frequency and quality factor of a poly MUMPs resonator. Journal of Advanced Research in Dynamical and Control Systems, 12 (4 Spec). pp. 1634-1641. ISSN 1943023X

Mohamed, M.J.B.G. and Mannan, H.A. and Nasir, R. and Mohshim, D.F. and Mukhtar, H. and Abdulrahman, A. and Ahmed, A. (2020) Composite mixed matrix membranes incorporating microporous carbon molecular sieve as filler in polyethersulfone for CO2/CH4 separation. Journal of Applied Polymer Science, 137 (12). ISSN 00218995

Ali, A. and Ilyas, S.U. and Garg, S. and Alsaady, M. and Maqsood, K. and Nasir, R. and Abdulrahman, A. and Zulfiqar, M. and Mahfouz, A.B. and Ahmed, A. and Ridha, S. (2020) Dynamic viscosity of Titania nanotubes dispersions in ethylene glycol/water-based nanofluids: Experimental evaluation and predictions from empirical correlation and artificial neural network. International Communications in Heat and Mass Transfer, 118. ISSN 07351933

Ahmed, A. and Saaid, I.M. and Ahmed, A.A. and Pilus, R.M. and Baig, M.K. (2020) Evaluating the potential of surface-modified silica nanoparticles using internal olefin sulfonate for enhanced oil recovery. Petroleum Science, 17 (3). pp. 722-733. ISSN 16725107

Singh, A.K. and Hakimi, M.H. and Kumar, A. and Ahmed, A. and Abidin, N.S.Z. and Kinawy, M. and Mahdy, O.E. and Lashin, A. (2020) Geochemical and organic petrographic characteristics of high bituminous shales from Gurha mine in Rajasthan, NW India. Scientific Reports, 10 (1). ISSN 20452322

Othman, N. and Saaid, I.M. and Ahmed, A. and Yusof, N.H. and Yahya, R. and Yunos, M.A.S.M. and Chik, E.M.F.E. and Shari, M.R. and Hassan, H. and Mahmood, A.A. (2020) Investigation of water-flooding activity using radiotracer technology in commercial core-flood set up. ASEAN Journal of Chemical Engineering, 20 (1). pp. 49-56. ISSN 16554418

Niazi, M.B.K. and Jahan, Z. and Ahmed, A. and Uzair, B. and Mukhtar, A. and Gregersen, �.W. (2020) Mechanical and thermal properties of carboxymethyl fibers (CMF)/PVA based nanocomposite membranes. Journal of Industrial and Engineering Chemistry, 90. pp. 122-131. ISSN 1226086X

Ahmed, A. and Khan, T. and Jahandad, S. and Hakimi, M.H. and Lashin, A.A. and Abidin, N.S.Z. (2020) Organic geochemistry indicates source-rock characteristics and hydrocarbon potential: A case study from Early Cretaceous Sembar Formation, southern Indus Basin, Pakistan. Arabian Journal of Geosciences, 13 (23). ISSN 18667511

Ahmed, A. and Mohd Saaid, I. and M Pilus, R. and Abbas Ahmed, A. and Tunio, A.H. and Baig, M.K. (2018) Development of surface treated nanosilica for wettability alteration and interfacial tension reduction. Journal of Dispersion Science and Technology, 39 (10). pp. 1469-1475. ISSN 01932691

Ahmed, A. and Maulud, A. and Ramasamy, M. and Keng, L.K. and Mahadzir, S. (2014) Simulation of hydrodynamics and reaction behavior in an industrial RFCC riser. Advanced Materials Research, 917. pp. 267-282. ISSN 10226680

Ahmed, A. and Dominic, D.D. and Abdullah, A. (2011) A novel replication strategy for large-scale mobile distributed database systems. Journal of Engineering Science and Technology, 6 (3). pp. 271-302. ISSN 18234690

Conference or Workshop Item

Gafare, M. and Khir, M.H.M. and Rabih, A. and Ahmed, A. and Dennis, J.O. (2015) Modeling and simulation of polysilicon piezoresistors in a CMOS-MEMS resonator for mass detection. In: UNSPECIFIED.

Rabih, A. and Dennis, J. and Khir, H. and Abdalrahman, M. and Ahmed, A. (2015) Modelling and Simulation of Polysilicon Piezoresistors in CMOS-MEMS Resonator for Biomarker Detection in Exhaled Breath. In: UNSPECIFIED.

Ahmed, A. and Shuker, M.T. and Rehman, K. and Bahrami, H. and Memon, M.K. (2013) Reducing mechanical formation damage by minimizing interfacial tension and capillary pressure in tight gas. In: UNSPECIFIED.

Ahmed, A. and Dominic, P.D.D. and Ibrahim, H. (2008) A binary hybrid replication strategy for improving availability and maintaining consistency of data in large scale mobile environments. In: UNSPECIFIED.

Ahmed, A. and Abdullah, A. and Dominic, P.D.D. (2008) A multi-agent based replication strategy for improving availability and maintaining consistency of data in large scale mobile traffic control environments. In: UNSPECIFIED.