Article

Sultan, S.M. and Chih Ping, T. and Sobayel, K. and Abdullah, M.Z. and Sopian, K. (2024) Optimization of the Assessment Method for Photovoltaic Module Enhancers: A Cost-Efficient Economic Approach Developed through Modified Area and Cost Factor. Processes, 12 (5).

Sultan, S.M. and Tso, C.P. and Ajeel, R.K. and Sobayel, K. and Abdullah, M.Z. and Sopian, K. and Al Busaidi, A.S. (2024) Revolutionizing photovoltaic excellence: Unveiling a cutting-edge approach to assessing module enhancers for optimal area and cost efficiency. Case Studies in Thermal Engineering, 55. ISSN 2214157X

Karim, M.A. and Abdullah, M.Z. and Waqar, A. and Deifalla, A.F. and Ragab, A.E. and Khan, M. (2023) Analysis of the mechanical properties of the single layered braid reinforced thermoplastic pipe (BRTP) for oil & gas industries. Results in Engineering, 20.

Shayuti, M.S.M. and Zainal, S. and Ya, T.M.Y.S.T. and Abdullah, M.Z. and Shahruddin, M.Z. and Othman, N.H. and Alias, N.H. and Mohd, T.A.T. and Sharudin, R.W. (2023) Assessment of contaminants in sand production from petroleum wells offshore Sabah. Environmental Science and Pollution Research, 30 (7). pp. 17122-17128.

Hussain, I.A. and Gilani, S.I. and Al-Kayiem, H.H. and Abdullah, M.Z. (2023) Numerical Investigation on the Effect of Vertically Oriented CPC on Spillage Loses in Evacuated Tube-Based Power Tower Receiver. Lecture Notes in Mechanical Engineering. pp. 343-356.

Mat-Shayuti, M.S. and Ya, T.M.Y.S.T. and Abdullah, M.Z. and Othman, N.H. and Alias, N.H. (2023) Thermal Profile and Calorimetric Power Analysis of 20-60 KiloHertz Ultrasonic Bath Reactor. GMSARN International Journal, 17 (4). pp. 416-420.

Karim, M.A. and Abdullah, M.Z. and Deifalla, A.F. and Azab, M. and Waqar, A. (2023) An assessment of the processing parameters and application of fibre-reinforced polymers (FRPs) in the petroleum and natural gas industries: A review. Results in Engineering, 18. ISSN 25901230

Mujahid, Y. and Sallih, N. and Abdullah, M.Z. and Mustapha, M. (2021) Effects of processing parameters for vacuum-bag-only method on void content and mechanical properties of laminated composites. Polymer Composites, 42 (2). pp. 567-582. ISSN 02728397

Mat-Shayuti, M.S. and Tuan Ya, T.M.Y.S. and Abdullah, M.Z. and Othman, N.H. and Alias, N.H. (2021) Exploring the effect of ultrasonic power, frequency, and load toward remediation of oil-contaminated beach and oilfield sands using ANOVA. Environmental Science and Pollution Research, 28 (41). pp. 58081-58091. ISSN 09441344

Abdullah, M.Z. and Shuaib B M Saheed, M. and Mohammat, M.F. and Salleh, S.N.M. (2021) Preliminary study of cellulose acetate nanofibre produced through the tri-solvent technique. International Journal of Chemical and Biochemical Sciences, 20. pp. 7-10. ISSN 22269614

Mujahid, Y. and Sallih, N. and Mustapha, M. and Abdullah, M.Z. and Mustapha, F. (2020) Effects of processing parameters for vacuum-bagging-only method on shape conformation of laminated composites. Processes, 8 (9). ISSN 22279717

Mat-Shayuti, M.S. and Tuan Ya, T.M.Y.S. and Abdullah, M.Z. and Alias, N.H. and Othman, N.H. and Zainal, S. (2020) Evaluation of Diffusivity and Wettability of Crude Oil-Contaminated Sand from Offshore Petroleum Facility Prior to Remediation Process. Water, Air, and Soil Pollution, 231 (7). ISSN 00496979

Mat-Shayuti, M.S. and Tuan Ya, T.M.Y.S. and Abdullah, M.Z. and Md Yusop, N. and Kamarrudin, N. and Myo Thant, M.M. and Che Daud, M.F. (2020) Simulations of different power intensity inputs towards pressure, velocity & cavitation in ultrasonic bath reactor. South African Journal of Chemical Engineering, 34. pp. 57-62. ISSN 10269185

Shayuti, M.S.M. and Sharudin, R.W. and Mohd, T.A.T. and Khamaruddin, P.N.F.M. and Abdullah, M.Z. and Yusoff, P.S.M.M. (2020) Thermal conductivity and crystallography of polypropylene/ polycarbonate/ polypropylene-graft-maleic anhydride polymer blend. Materials Science Forum, 995 MS. pp. 56-62. ISSN 02555476

Mujahid, Y. and Sallih, N. and Abdullah, M.Z. (2020) A comparison of single-vacuum-bag and double-vacuum-bag methods for manufacturing high-quality laminated composites. Lecture Notes in Mechanical Engineering. pp. 457-467. ISSN 21954356

Abdullah, M.Z. and Aslan, N.H.C. (2019) Performance evaluation of composite from recycled polypropylene reinforced with mengkuang leaf fiber. Resources, 8 (2). ISSN 20799276

Mat-Shayuti, M.S. and Tuan Ya, T.M.Y.S. and Abdullah, M.Z. and Megat Khamaruddin, P.N.F. and Othman, N.H. (2019) Progress in ultrasonic oil-contaminated sand cleaning: a fundamental review. Environmental Science and Pollution Research, 26 (26). pp. 26419-26438. ISSN 09441344

Abbas, T. and Ya, H.H. and Abdullah, M.Z. (2017) Experimental investigation of energy absorption of partially wrapped thin-walled aluminium-glass/epoxy tube subjected to quasi-static loading. Materials Science Forum, 904 MS. pp. 61-67. ISSN 02555476

Sarlan, A. and Wan Ahmad, W.F. and Rashikin, N.S. and Abdullah, M.Z. and Ahmad, R. (2017) The integration of engineering calculations: ENGIEPRO. Advanced Science Letters, 23 (11). pp. 10709-10714. ISSN 19366612

Chuah, L.F. and Yusup, S. and Abd Aziz, A.R. and Bokhari, A. and Abdullah, M.Z. (2016) Cleaner production of methyl ester using waste cooking oil derived from palm olein using a hydrodynamic cavitation reactor. Journal of Cleaner Production, 112. pp. 4505-4514. ISSN 09596526

Abbas, T. and Ya, H.H. and Abdullah, M.Z. (2016) Energy absorption capability of aluminium tube partially wrapped with glass/epoxy subjected to quasi-static loading. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14313-14318. ISSN 18196608

Dan-Mallam, Y. and Abdullah, M.Z. and Megat Yusoff, P.S.M. (2016) Influence of Recycling Frequency on Mechanical and Physical Properties of Kenaf Fiber Reinforced Polyoxymethylene Composite. Journal of Natural Fibers, 13 (5). pp. 532-546. ISSN 15440478

Chuah, L.F. and Yusup, S. and Aziz, A.R.A. and Klemeš, J.J. and Bokhari, A. and Abdullah, M.Z. (2016) Influence of fatty acids content in non-edible oil for biodiesel properties. Clean Technologies and Environmental Policy, 18 (2). pp. 473-482. ISSN 1618954X

Irshad, M.I. and Mohamed, N.M. and Abdullah, M.Z. and Saheed, M.S.M. and Mumtaz, A. and Yasar, M. and Yar, A. and Zeeshan, M.A. and Sort, J. (2016) Influence of the electrodeposition potential on the crystallographic structure and effective magnetic easy axis of cobalt nanowires. RSC Advances, 6 (17). pp. 14266-14272. ISSN 20462069

Mohamed, N.M. and Irshad, M.I. and Abdullah, M.Z. and Saheed, M.S.M. (2016) Novel growth of carbon nanotubes on nickel nanowires. Diamond and Related Materials, 65. pp. 59-64. ISSN 09259635

Chuah, L.F. and Yusup, S. and Abd Aziz, A.R. and Bokhari, A. and Klemeš, J.J. and Abdullah, M.Z. (2015) Intensification of biodiesel synthesis from waste cooking oil (Palm Olein) in a Hydrodynamic Cavitation Reactor: Effect of operating parameters on methyl ester conversion. Chemical Engineering and Processing: Process Intensification, 95. pp. 235-240. ISSN 02552701

Dan-Mallam, Y. and Abdullah, M.Z. and Yusoff, P.S.M.M. (2015) Mechanical properties of short and continuous kenaf/PET fibre reinforced polyoxymethylene composite. Advanced Composites Letters, 24 (4). pp. 81-91. ISSN 2633366X

Chuah, L.F. and Aziz, A.R.A. and Yusup, S. and Bokhari, A. and Klemeš, J.J. and Abdullah, M.Z. (2015) Performance and emission of diesel engine fuelled by waste cooking oil methyl ester derived from palm olein using hydrodynamic cavitation. Clean Technologies and Environmental Policy, 17 (8). pp. 2229-2241. ISSN 1618954X

Pham, H.H.P.L. and Rusli, R. and Abdullah, M.Z. (2014) Consequence study of pressurized CO2 release containing impurities with obstacles. Applied Mechanics and Materials, 625. pp. 474-477. ISSN 16609336

Dan-Mallam, Y. and Abdullah, M.Z. and Yusoff, P.S.M.M. (2014) Mechanical properties of recycled kenaf/polyethylene terephthalate (PET) fiber reinforced polyoxymethylene (POM) hybrid composite. Journal of Applied Polymer Science, 131 (3). ISSN 00218995

Abdullah, M.Z. and Sufian, S. and Abdul Hamid, F.H. (2014) Ph dependence on biosorption of PB (II) by p. Amaryllifolius roxb. Applied Mechanics and Materials, 625. pp. 757-760. ISSN 16609336

Irshad, M.I. and Ahmad, F. and Mohamed, N.M. and Abdullah, M.Z. (2014) Preparation and structural characterization of template assisted electrodeposited copper nanowires. International Journal of Electrochemical Science, 9 (5). pp. 2548-2555. ISSN 14523981

Abdullah, M.Z. and Yusup, S. and Mohd Bukhari, N.A. (2014) Synthesis and dehumidification performance of calcium chloride derived from the waste shells of Anadara granosa. Applied Mechanics and Materials, 625. pp. 924-927. ISSN 16609336

Dan-Mallam, Y. and Abdullah, M.Z. and Megat Yusoff, P.S.M. (2014) The effect of hybridization on mechanical properties of woven kenaf fiber reinforced polyoxymethylene composite. Polymer Composites, 35 (10). pp. 1900-1910. ISSN 02728397

Mohd Azlan, M.A. and Abdul Latif, M.R. and Abdullah, M.Z. and Zainal Abidin, K.A. and Abdul Wahab, A. (2013) Flow behavior in the resin infusion of glass fiber reinforced polymer wind turbine blade. Advanced Materials Research, 686. pp. 118-124. ISSN 10226680

Dan-Mallam, Y. and Abdullah, M.Z. and Megat Yosuff, P.S. (2013) Impact strength, microstructure, and water absorption properties of kenaf/polyethylene terephthalate (PET) fiber-reinforced polyoxymethylene (POM) hybrid composites. Journal of Materials Research, 28 (16). pp. 2142-2146. ISSN 08842914

Dan-mallam, Y. and Abdullah, M.Z. and Yusoff, P.S.M.M. (2013) Mechanical properties of knitted kenaf fiber reinforced polyoxymethylene (pom) laminate composite. Malaysian Journal of Microscopy, 9 (1). pp. 31-36. ISSN 18237010

Mat-Shayuti, M.S. and Abdullah, M.Z. and Megat-Yusoff, P.S.M. (2013) Water absorption properties and morphology of polypropylene/polycarbonate/polypropylene-graft-maleic anhydride blends. Asian Journal of Scientific Research, 6 (2). pp. 167-176. ISSN 19921454

Mohammadpour, E. and Awang, M. and Abdullah, M.Z. (2011) Predicting the Young's modulus of single-walled carbon nanotubes using finite element modeling. Journal of Applied Sciences, 11 (9). pp. 1653-1657. ISSN 18125654

Abdullah, M.Z. and Loo, K.P. (2006) Separation of divalent metal ions using Pandanus Amaryllifolius Roxb (Pandanus) leaves: Desorption study. WIT Transactions on Ecology and the Environment, 92. pp. 313-321. ISSN 17433541

Conference or Workshop Item

Abdullah, M.Z. and Jemsee, J.S. and Mahmud, M.S. and Ya, H. (2018) Effects of fluoropolymer and calcium stearate on melt flow index and mechanical properties of high-density polyethylene. In: UNSPECIFIED.

Abdullah, M.Z. and Mohamed Rashidi, N.A. (2018) Mixing analysis of nitrogen and hydrogen gases for ammonia synthesis via magnetic induction in monolithic channel. In: UNSPECIFIED.

Abbas, T. and Ya, H.H. and Abdullah, M.Z. (2017) Comparison of Energy Absorption of Aluminium-composite Tubes Subjected to Axial Loading. In: UNSPECIFIED.

Hidayat, M.I.P. and Irawan, S. and Abdullah, M.Z. (2017) Effect of casing imperfection on the casing strength in steam injection wells. In: UNSPECIFIED.

Abbas, T. and Ya, H.H. and Abdullah, M.Z. (2017) Effect of composite layers on partially wrapped Al-glass/epoxy hybrid tube subjected to axial load. In: UNSPECIFIED.

Mat-Shayuti, M.S. and Abdullah, M.Z. and Megat-Yusoff, P.S.M. (2017) Tensile Behaviour and Morphology of Polypropylene/Polycar-bonate/Polypropylene-graft-maleic Anhydride Blends. In: UNSPECIFIED.

Salleh, S.N.M. and Zainon, N.M. and Abdullah, M.Z. (2017) The effect of oleic acid as post spinning treatment on tensile strength of polyacrylonitrile fibers. In: UNSPECIFIED.

Kashif, S.B. and Abdullah, M.Z. and Kushaari, K. (2016) CFD Modeling of N2/H2 Gaseous Flow with Geometric Variations in a Monolithic Channel. In: UNSPECIFIED.

Hidayat, M.I.P. and Irawan, S. and Abdullah, M.Z. (2016) Casing strength degradation in thermal environment of steam injection wells. In: UNSPECIFIED.

Ali, W.N.N.W. and Sufian, S. and Abdullah, M.Z. (2016) Green Functionalization: Comparison of Different Carbonaceous Materials. In: UNSPECIFIED.

Abdullah, M.Z. and Qasim, A. (2016) Parametric Analysis of Carbon Dioxide Adsorption on Nanoporous Activated Carbon Using Computational Approach. In: UNSPECIFIED.

Mat-Shayuti, M.S. and Abdullah, M.Z. and Megat-Yusoff, P.S.M. (2016) THERMAL properties and morphology of Polypropylene/Polycarbonate/Polypropylene-Graft-Maleic anhydride blends. In: UNSPECIFIED.

Irshad, M.I. and Ahmad, F. and Mohamed, N.M. and Abdullah, M.Z. and Yar, A. (2015) Microscopic and magnetic properties of template assisted electrodeposited iron nanowires. In: UNSPECIFIED.

Abdullah, M.Z. and Ismail, S.S. (2015) Modifications of chemical functional groups of Pandanus amaryllifolius Roxb and its effect towards biosorption of heavy metals. In: UNSPECIFIED.

Salleh, S.N.M. and Abdullah, M.Z. and Wahab, A.A. (2014) Chemical and physical characterization of stabilized polyacrylonitrile (pan) fiber. In: UNSPECIFIED.

Salleh, S.N.M. and Abdullah, M.Z. and Wahab, A.A. (2014) Chemical characterization of stabilized and carbonized polyacrylonitrile (pan) fibers treated with oleic acid. In: UNSPECIFIED.

Latif, M.R.A. and Azlan, M.A.M. and Abdullah, M.Z. and Abidin, K.A.Z. and Wahab, A.A. (2012) Mold-less construction of GRP composite wind blade using resin infusion process: Flow monitoring and void characterization. In: UNSPECIFIED.

Majid, M.F.M.A. and Khor, C.Y. and Abdullah, M.K. and Abdullah, M.Z. and Rahiman, W.Y. and Jappar, A. and Aris, M.S. (2012) Three dimensional numerical prediction of epoxy flow during the underfill process in flip chip packaging. In: UNSPECIFIED.