Items where Author is "Abdulkadir, I."
Article
Udeze, O.J. and Mohammed, B.S. and Adebanjo, A.U. and Abdulkadir, I. (2024) Optimizing an eco-friendly high-density concrete for offshore applications: A study on fly ash partial replacement and graphene oxide nano reinforcement. Case Studies in Chemical and Environmental Engineering, 9.
Abdulkadir, I. and Mohammed, B.S. and Woen, E.L. and Sing, W.L. and Al-Yacouby, A.M. (2024) Optimizing sulfate and acid resistance in rubberized engineered cementitious composite with graphene oxide-pretreated crumb rubber: A response surface methodology approach. Developments in the Built Environment, 18.
Abdulkadir, I. and Mohammed, B.S. and Al-Yacouby, A.M. and Woen, E.L. and Tafsirojjaman, T. (2024) Tailoring an engineered cementitious composite with enhanced mechanical performance at ambient and elevated temperatures using graphene oxide and crumb rubber. Journal of Materials Research and Technology, 28. pp. 4508-4530.
Bheel, N. and Mohammed, B.S. and Abdulkadir, I. and Liew, M.S. and Zawawi, N.A.W.A. (2023) Effects of Graphene Oxide on the Properties of Engineered Cementitious Composites: Multi-Objective Optimization Technique Using RSM. Buildings, 13 (8).
Giri, Y.G.A.L.P. and Mohammed, B.S. and Liew, M.S. and Zawawi, N.A.W.A. and Abdulkadir, I. and Singh, P. and Ravindran, G. (2023) Mechanical and Microstructural Properties of Rubberized Geopolymer Concrete: Modeling and Optimization. Buildings, 13 (8).
Hong, W.C. and Mohammed, B.S. and Abdulkadir, I. and Liew, M.S. (2023) Modeling and Optimizing the Effect of Palm Oil Fuel Ash on the Properties of Engineered Cementitious Composite. Buildings, 13 (3).
Abdulkadir, I. and Mohammed, B.S. (2023) Rubbercrete Interlocking Brick as a Sustainable Construction Material: A Short Discussion of Its Fundamental Properties. Lecture Notes in Civil Engineering, 334 LN. pp. 663-675.
Ismail, F.I. and Shafiq, N. and Abbas, Y.M. and Ateya, E.S. and Zahid, M. and Bheel, N. and Benjeddou, O. and Abdulkadir, I. (2023) The behavior of graphene-nanoplatelets-based high-performance concrete under ambient curing. Structures, 47. pp. 694-708.
Rahim, N.I. and Mohammed, B.S. and Abdulkadir, I. and Dahim, M. (2022) Effect of Crumb Rubber, Fly Ash, and Nanosilica on the Properties of Self-Compacting Concrete Using Response Surface Methodology. Materials, 15 (4). ISSN 19961944
Abdulkadir, I. and Mohammed, B.S. and Liew, M.S. and Wahab, M.M.A. (2022) Effect of Graphene Oxide and Crumb Rubber on the Drying Shrinkage Behavior of Engineered Cementitious Composite (ECC): Experimental Study, RSM�Based Modelling and Optimization. Lecture Notes in Civil Engineering, 179. pp. 29-42. ISSN 23662557
Abdulkadir, I. and Mohammed, B.S. and Ali, M.O.A. and Liew, M.S. (2022) Effects of Graphene Oxide and Crumb Rubber on the Fresh Properties of Self-Compacting Engineered Cementitious Composite Using Response Surface Methodology. Materials, 15 (7). ISSN 19961944
Appana, P.M. and Mohammed, B.S. and Abdulkadir, I. and Ali, M.O.A. and Liew, M.S. (2022) Mechanical, Microstructural and Drying Shrinkage Properties of NaOH-Pretreated Crumb Rubber Concrete: RSM-Based Modeling and Optimization. Materials, 15 (7). ISSN 19961944
Choo, J. and Mohammed, B.S. and Chen, P.-S. and Abdulkadir, I. and Yan, X. (2022) Modeling and Optimizing the Effect of 3D Printed Origami Bubble Aggregate on the Mechanical and Deformation Properties of Rubberized ECC. Buildings, 12 (12). ISSN 20755309
Ali, M. and Abbas, S. and Salah, B. and Akhter, J. and Saleem, W. and Haruna, S. and Room, S. and Abdulkadir, I. (2021) Article investigating optimal confinement behaviour of low-strength concrete through quantitative and analytical approaches. Materials, 14 (16). ISSN 19961944
Mohammed, B.S. and Xian, L.W. and Haruna, S. and Liew, M.S. and Abdulkadir, I. and Zawawi, N.A.W.A. (2021) Deformation Properties of Rubberized Engineered Cementitious Composites Using Response Surface Methodology. Iranian Journal of Science and Technology - Transactions of Civil Engineering, 45 (2). pp. 729-740. ISSN 22286160
Abdulkadir, I. and Mohammed, B.S. and Liew, M.S. and Wahab, M.M.A. (2021) Modelling and multi-objective optimization of the fresh and mechanical properties of self-compacting high volume fly ash ECC (HVFA-ECC) using response surface methodology (RSM). Case Studies in Construction Materials, 14. ISSN 22145095
Abdulkadir, I. and Mohammed, B.S. and Liew, M.S. and Wahab, M.M.A. (2021) Modelling and optimization of the mechanical properties of engineered cementitious composite containing crumb rubber pretreated with graphene oxide using response surface methodology. Construction and Building Materials, 310. ISSN 09500618
Kankia, M.U. and Baloo, L. and Danlami, N. and Mohammed, B.S. and Haruna, S. and Abubakar, M. and Jagaba, A.H. and Sayed, K. and Abdulkadir, I. and Salihi, I.U. (2021) Performance of fly ash-based inorganic polymer mortar with petroleum sludge ash. Polymers, 13 (23). ISSN 20734360
Murali, M. and Mohammed, B.S. and Abdulkadir, I. and Liew, M.S. and Alaloul, W.S. (2021) Utilization of crumb rubber and high-volume fly ash in concrete for environmental sustainability: Rsm-based modeling and optimization. Materials, 14 (12). ISSN 19961944
Mohammed, B.S. and Yen, L.Y. and Haruna, S. and Seng Huat, M.L. and Abdulkadir, I. and Al-Fakih, A. and Liew, M.S. and Abdullah Zawawi, N.A.W. (2020) Effect of elevated temperature on the compressive strength and durability properties of crumb rubber engineered cementitious composite. Materials, 13 (16). ISSN 19961944
Abdulkadir, I. and Mohammed, B.S. and Liew, M.S. and Bin Abdul Wahab, M.M. and Zawawi, N.A.W.A. and As'ad, S. (2020) A review of the effect of waste tire rubber on the properties of ECC. International Journal of Advanced and Applied Sciences, 7 (8). pp. 105-116. ISSN 2313626X
Conference or Workshop Item
Abdulkadir, I. and Mohammed, B.S. (2023) Effect of graphene oxide on the long-term modulus of elasticity and Poisson's ratio of rubberized ECC. In: UNSPECIFIED.
Mohammed, B.S. and Abdulkadir, I. and Perceka, W. and Djayaprabha, H.S. (2023) The behavior of rubberized engineered cementitious composites under extreme loading: A review. In: UNSPECIFIED.