Syed Masharuddin, S.M. and Abdul Karim, Z.A. and Meor Said, M.A. and Amran, N.H. and Ismeal, M.A. (2023) Determining the Influencing Factors for Micro-Explosion of Emulsified Biodiesel Fuel. Lecture Notes in Mechanical Engineering. pp. 133-146.

Abdul Karim, Z.A. and Baheta, A.T. and Milad, M.F.D. (2023) Development of Model and Program for Prediction of Gas Turbine Design Point Unknown Parameters. Lecture Notes in Mechanical Engineering. pp. 161-169.

Amran, N.H. and Abdul Karim, Z.A. and Martang, M.N.I. and Dalha, I.B. (2023) Examining Combustion Characteristics of Water-In-Palm Oil Biodiesel Emulsified Fuels for Micro-Explosion. Lecture Notes in Mechanical Engineering. pp. 107-121.

Salilew, W.M. and Abdul Karim, Z.A. and Lemma, T.A. and Fentaye, A.D. and Kyprianidis, K.G. (2023) Three Shaft Industrial Gas Turbine Transient Performance Analysis. Sensors, 23 (4).

Salilew, W.M. and Abdul Karim, Z.A. and Lemma, T.A. and Fentaye, A.D. and Kyprianidis, K.G. (2022) The Effect of Physical Faults on a Three-Shaft Gas Turbine Performance at Full- and Part-Load Operation. Sensors, 22 (19). ISSN 14248220

Said, M.A. and Dalha, I.B. and Abdul Karim, Z.A. and El-Adawy, M. (2022) Influence of biogas mixing parameters on the combustion and emission characteristics of diesel RCCI engine. Alexandria Engineering Journal, 61 (2). pp. 1479-1497. ISSN 11100168

Soomro, A.A. and Mokhtar, A.A. and Salilew, W.M. and Abdul Karim, Z.A. and Abbasi, A. and Lashari, N. and Jameel, S.M. (2022) Machine Learning Approach to Predict the Performance of a Stratified Thermal Energy Storage Tank at a District Cooling Plant Using Sensor Data. Sensors, 22 (19). ISSN 14248220

Salilew, W.M. and Abdul Karim, Z.A. and Lemma, T.A. and Fentaye, A.D. and Kyprianidis, K.G. (2022) Predicting the Performance Deterioration of a Three-Shaft Industrial Gas Turbine. Entropy, 24 (8). ISSN 10994300

Syed Masharuddin, S.M. and Abdul Karim, Z.A. and Meor Said, M.A. and Amran, N.H. and Ismael, M.A. (2022) The evolution of a single droplet water-in-palm oil derived biodiesel emulsion leading to micro-explosion. Alexandria Engineering Journal, 61 (1). pp. 541-547. ISSN 11100168

Dabbaghi, M.F. and Baharom, M.B. and Abdul Karim, Z.A. and A. Aziz, A.R. and Mohammed, S.E. and Zainal A., E.Z. (2021) Comparative evaluation of different heat transfer correlations on a single curved-cylinder spark ignition crank-rocker engine. Alexandria Engineering Journal, 60 (3). pp. 2963-2978. ISSN 11100168

Dalha, I.B. and Said, M.A. and Abdul Karim, Z.A. and El-Adawy, M. (2021) Effects of port mixing and high carbon dioxide contents on power generation and emission characteristics of biogas-diesel RCCI combustion. Applied Thermal Engineering, 198. ISSN 13594311

Abdul Karim, Z.A. and Kaur, E. and Syed Masharuddin, S.M. and Khan, M.Y. and Hagos, F.Y. (2020) The characteristics of water-in-biodiesel emulsions produced using ultrasonic homogenizer. Alexandria Engineering Journal, 59 (1). pp. 227-237. ISSN 11100168

Dalha, I.B. and Said, M.A. and Abdul Karim, Z.A. and Mohammed, S.E. (2020) An experimental investigation on the influence of port injection at valve on combustion and emission characteristics of B5/biogas RCCI engine. Applied Sciences (Switzerland), 10 (2). ISSN 20763417

Jamaluddin, F.N. and Abdul Karim, Z.A. and Abdul Majid, M.A. and Sasaki, T. (2019) Cooling capacity optimization of absorption chillers using binary integer programming. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 63 (2). pp. 287-294. ISSN 22897879

Abdul Karim, Z.A. and Khan, M.Y. and Aziz, A.R.A. (2019) Evolution of Microexplosion Phenomenon in Parent-Child Droplets of Water in Biodiesel Emulsions Enhanced by Different Surfactant Dosages and Hydrophilic-Lipophilic Balance Values. Journal of Energy Resources Technology, Transactions of the ASME, 141 (10). ISSN 01950738

Abdul Karim, Z.A. and Afiq Sidqi, M. and Majid, M.A.A. and Muhammad, M. and Aoki, H. and Xiaoming, Z. (2019) Exergy and regression analysis for optimization of electric chillers at a gas district cooling plant. International Journal of Advanced Trends in Computer Science and Engineering, 8 (1.3 S1). pp. 98-102. ISSN 22783091

Dalha, I.B. and Said, M.A. and Abdul Karim, Z.A. and Aziz, A.R.A. and Firmansyah and Abidin, E.Z.Z. and Ismael, M.A. (2019) Reactivity controlled compression ignition: An advanced combustion mode for improved energy efficiency. Springer Singapore, pp. 101-126. ISBN 9789811501029; 9789811501012

Jaffry, M.N.M. and Abdul Karim, Z.A. and Ramlan, N.A. and Mohammed, S.E. and Zainal, E.Z. and Firmansyah and Ahmad, A.S. and Baharom, M.B. and Heikal, M.R. and Aziz, A.R.A. (2018) Bouncing phenomena of free piston linear generator at starting process. In: UNSPECIFIED.

Khan, M.Y. and Abdul Karim, Z.A. and Aziz, A.R.A. (2018) Experimental investigation of performance and emission characteristics of an idi diesel engine using homogenized water in diesel emulsion. International Journal of Mechanical and Production Engineering Research and Development, 8 (3). pp. 933-942. ISSN 22496890

Dalha, I.B. and Said, M.A. and Abdul Karim, Z.A. and Firmansyah, F. (2018) Strategies and methods of RCCI combustion: A review. In: UNSPECIFIED.

Nordin, N. and Abdul Karim, Z.A. and Othman, S. and Raghavan, V.R. and Adzila, S. and Md Seri, S. and Md Taib, I. and Ramli, Y. (2017) Assessment of turbulence model performance adopted near wall treatment for a sharp 90° 3-D turning diffuser. Communications in Computer and Information Science, 751. pp. 259-273. ISSN 18650929

Tahan, M. and Muhammad, M. and Abdul Karim, Z.A. (2017) Performance evaluation of a twin-shaft gas turbine engine in mechanical drive service. Journal of Mechanical Science and Technology, 31 (2). pp. 937-948. ISSN 1738494X

Tahan, M. and Tsoutsanis, E. and Muhammad, M. and Abdul Karim, Z.A. (2017) Performance-based health monitoring, diagnostics and prognostics for condition-based maintenance of gas turbines: A review. Applied Energy, 198. pp. 122-144. ISSN 03062619

Yahaya Khan, M. and Abdul Karim, Z.A. and Aziz, A.R.A. and Heikal, M.R. and Crua, C. (2017) Puffing and microexplosion behavior of water in pure diesel emulsion droplets during leidenfrost effect. Combustion Science and Technology, 189 (7). pp. 1186-1197. ISSN 00102202

Tahan, M. and Muhammad, M. and Abdul Karim, Z.A. (2017) A multi-nets ANN model for real-time performance-based automatic fault diagnosis of industrial gas turbine engines. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 39 (7). pp. 2865-2876. ISSN 16785878

Tahan-Bouria, M. and Muhammad, M. and Abdul Karim, Z.A. (2016) Adaptive neuro-fuzzy inference system for performance health monitoring of industrial gas turbines. In: UNSPECIFIED.

Abdul Karim, Z.A. and Aiman, M.H. and Khan, M.Y. (2016) Efficacy of water-in-diesel emulsion to reduce exhaust gas pollutants of diesel engine. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14284-14289. ISSN 18196608

Muhammad, M.B and Sarwar, U. and Tahan, M.R. and Abdul Karim, Z.A. (2016) Fault diagnostic model for rotating machinery based on principal component analysis and neural network. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14327-14331. ISSN 18196608

Tahan, M. and Sarwar, U. and Muhammad, M. and Abdul Karim, Z.A. (2016) Modeling and sensitivity analysis of a multi-nets anns model for real-time performance-based condition monitoring of an industrial gas turbine engine. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14269-14274. ISSN 18196608

Khan, M.Y. and Abdul Karim, Z.A. and Aziz, A.R.A. (2016) An experimental investigation of microexplosion in bio fuel emulsion. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14303-14307. ISSN 18196608

Khan, M.Y. and Abdul Karim, Z.A. and Aziz, A.R.A. and Tan, I.M. (2015) A case study on preparation, stability and physical properties of water in diesel emulsion. ARPN Journal of Engineering and Applied Sciences, 10 (22). pp. 17289-17293. ISSN 18196608

Yahaya Khan, M. and Abdul Karim, Z.A. and Hagos, F.Y. and Aziz, A.R.A. and Tan, I.M. (2014) Current trends in water-in-diesel emulsion as a fuel. The Scientific World Journal, 2014. ISSN 1537744X

Al-Wakeel, H.B. and Abdul Karim, Z.A. and Al-Kayiem, H.H. (2014) Electric field prediction using micro-plasma inside a microwave cavity for soot oxidation. In: UNSPECIFIED.

Khan, M.Y. and Abdul Karim, Z.A. and Aziz, A.R.A. and Tan, I.M. (2014) Experimental investigation of microexplosion occurrence in water in diesel emulsion droplets during the leidenfrost effect. Energy and Fuels, 28 (11). pp. 7079-7084. ISSN 08870624

Abdul Karim, Z.A. and Mohammad Mursal, M.A.H. and Mat Jamlus, M.H. (2014) High-frequency electromagnetic waves for diesel soot oxidation strategy. Advanced Materials Research, 875-87. pp. 1382-1386. ISSN 10226680

Al-Wakeel, H.B. and Abdul Karim, Z.A. and Al-Kayiem, H.H. (2014) Numerical simulation of microwave heating for soot oxidation. Applied Mechanics and Materials, 564. pp. 256-262. ISSN 16609336

Khan, M.Y. and Abdul Karim, Z.A. and Aziz, A.R.A. and Tan, I.M. (2014) Performance and emission assessment of multi cylinder diesel engine using surfactant enhanced water in diesel emulsion. In: UNSPECIFIED.

Sarwar, U. and Muhammad, M.B. and Abdul Karim, Z.A. (2014) Time series method for machine performance prediction using condition monitoring data. In: UNSPECIFIED.

Seri, S.M. and Abdul Karim, Z.A. and Batcha, M.F.M. and Raghavan, V.R. (2014) Tube bank with integral wake splitter performance at Reynolds number 5000 to 50000. Applied Mechanics and Materials, 465-46. pp. 546-551. ISSN 16609336

Nordin, N. and Abdul Karim, Z.A. and Othman, S. and Raghavan, V.R. (2014) Verification of fully developed flow entering diffuser and particle image velocimetry procedures. Applied Mechanics and Materials, 465-46. pp. 1352-1356. ISSN 16609336

Nordin, N. and Abdul Karim, Z.A. and Othman, S. and Raghavan, V.R. (2014) The performance of turning diffusers at various inlet conditions. Applied Mechanics and Materials, 465-46. pp. 597-602. ISSN 16609336

Aja, O.C. and Al-Kayiem, H.H. and Abdul Karim, Z.A. (2013) Analytical investigation of collector optimum tilt angle at low latitude. Journal of Renewable and Sustainable Energy, 5 (6). ISSN 19417012

Aja, O.C. and Al-Kayiem, H.H. and Abdul Karim, Z.A. (2013) Experimental investigation of the effect of wind speed and wind direction on a solar chimney power plant. WIT Transactions on Ecology and the Environment, 179 VO. pp. 945-955. ISSN 17433541

Mahgoub, B.K.M. and Sulaiman, S.A. and Abdul Karim, Z.A. (2013) Performance of a compression ignition engine fuelled by diesel and imitated syngas. Asian Journal of Scientific Research, 6 (3). pp. 456-466. ISSN 19921454

Abdul Karim, Z.A. and Mohd Azmi, M.N.H. and Abdullah, A.S. (2012) Design of a heat exchanger for gas turbine inlet air using chilled water system. In: UNSPECIFIED.

Al-Wakeel, H.B. and Abdul Karim, Z.A. and Al-Kayiem, H.H. (2012) Soot reduction strategy: A review. Journal of Applied Sciences, 12 (23). pp. 2338-2345. ISSN 18125654

Devarajan, R. and Mahendran, S. and Abdul Karim, Z.A. and Nagarajan, T. (2010) Design of valve less micropump using preliminary characteristics from fluid flow. In: UNSPECIFIED.

Sulaiman, S.A. and Murad, S.H.M. and Ibrahim, I. and Abdul Karim, Z.A. (2010) Study of flow in air-intake system for a single-cylinder Go-Kart engine. International Journal of Automotive and Mechanical Engineering, 1 (1). pp. 91-104. ISSN 22298649

Nugroho, G. and Ali, A.M.S. and Abdul Karim, Z.A. (2010) A class of exact solutions to the three-dimensional incompressible NavierStokes equations. Applied Mathematics Letters, 23 (11). pp. 1388-1396. ISSN 08939659

Nugroho, G. and Ali, A.M.S. and Abdul Karim, Z.A. (2009) On a special class of analytical solutions to the three-dimensional incompressible Navier-Stokes equations. Applied Mathematics Letters, 22 (11). pp. 1639-1644. ISSN 08939659