eprintid: 9915
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/00/99/15
datestamp: 2023-11-09 16:36:33
lastmod: 2023-11-09 16:36:33
status_changed: 2023-11-09 16:30:08
type: article
metadata_visibility: show
creators_name: Abbasi, A.
creators_name: Nasef, M.M.
creators_name: Faridi-Majidi, R.
creators_name: Etesami, M.
creators_name: Takeshi, M.
creators_name: Abouzari-Lotf, E.
title: Highly flexible method for fabrication of poly (Glycidyl Methacrylate) grafted polyolefin nanofiber
ispublished: pub
keywords: Electrospinning; Fabrication; Grafting (chemical); Nanofibers; Polypropylenes; Surface properties, Electrospinning parameters; Electrospinning process; Glycidyl methacrylate; Poly(glycidyl methacrylate); Radiation-induced grafting; Response surface method; Syndiotactic polypropylene; Tip-to-collector distance, Acrylic monomers, ethylene oxide; glycidyl methacrylate; methacrylic acid; methacrylic acid derivative; nanofiber; poly(glycidyl methacrylate); polymethacrylic acid derivative; polyolefin; unclassified drug, Article; chemical modification; chemical procedures; chemical structure; electric potential; electrospinning; flow rate; irradiation; linear system; mathematical computing; mathematical model; prediction; process design; process optimization; synthesis
note: cited By 12
abstract: This paper describes the development of highly flexible and simple approaches toward fabrication of syndiotactic polypropylene (s-PP) nanofibers of desired morphology and functionalization with modifiable poly (glycidyl methacrylate) (PGMA) of desired level. To this end, the nanofibers were fabricated by electrospinning. Optimization of electrospinning process was carried out using Box-Behnken design (BBD) of response surface method (RSM) and a linear mathematical model was developed to relate various electrospinning parameters to the average fiber diameter. According to the model calculation, a minimum fiber diameter of 336 nm was supposed to be obtained at a flow rate of 4 ml/min, applied voltage of 16 kV and needle tip to collector distance of 20 cm, which was confirmed by the experiment with only 2.2 error. Furthermore, prediction capability experiments of the model revealed maximum 5.3 and 8.9 deviation from the model-predicted values for applied high voltage and flow rate, respectively. Radiation induced grafting of glycidyl methacrylate (GMA) on the electrospun nanofibers was carried out to impart desired density of oxirane groups to the nanofibrous s-PP. © 2018 Elsevier Ltd
date: 2018
publisher: Elsevier Ltd
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85049746982&doi=10.1016%2fj.radphyschem.2018.07.002&partnerID=40&md5=99ca59b64507142b54ac2ea07d2e6aa2
id_number: 10.1016/j.radphyschem.2018.07.002
full_text_status: none
publication: Radiation Physics and Chemistry
volume: 151
pagerange: 283-291
refereed: TRUE
issn: 0969806X
citation:   Abbasi, A. and Nasef, M.M. and Faridi-Majidi, R. and Etesami, M. and Takeshi, M. and Abouzari-Lotf, E.  (2018) Highly flexible method for fabrication of poly (Glycidyl Methacrylate) grafted polyolefin nanofiber.  Radiation Physics and Chemistry, 151.  pp. 283-291.  ISSN 0969806X