eprintid: 9793
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/00/97/93
datestamp: 2023-11-09 16:36:26
lastmod: 2023-11-09 16:36:26
status_changed: 2023-11-09 16:29:50
type: conference_item
metadata_visibility: show
creators_name: Jessam, R.A.
creators_name: Al-Kayiem, H.H.
creators_name: Nasif, M.S.
title: Comparative Study on the Performance of S-Shaped Diffuser with Shorten Length
ispublished: pub
keywords: Air intakes; Computer software; Flow control; Flow separation, Distortion coefficients; Numerical investigations; Performance evaluations; Pressure loss coefficient; Static pressure coefficient; Static pressure recovery coefficient; Total pressure loss coefficient; Turbulence intensity, Computational fluid dynamics
note: cited By 4; Conference of 2018 UTP-UMP-VIT Symposium on Energy Systems, SES 2018 ; Conference Date: 18 September 2018 Through 19 September 2018; Conference Code:141921
abstract: This study presents numerical investigation on the performance of S-shaped air intake normal and aggressive diffuser with 22 length reduction. Both models have same area ratio of 3.1 with different total length, turning angle and radius of curvature. The numerical investigation was implemented using CFD simulation by ANSYS-FLUENT 15 software. The inlet Reynold number was 4�104 and turbulence intensity 4.1. The performance evaluation was performed throw evaluation the static pressure coefficient, pressure loss coefficient, distortion coefficient and static pressure wall coefficient. The numerical results show that the performance in the case of aggressive S-shaped diffuser has been reduced compared to the normal S-shaped diffuser. This reduction resulting from the early flow separation and increase of the separation zone due to the high curvature of top and bottom surfaces of aggressive S-shaped diffuser. The results show that the static pressure recovery coefficient decreased by 31, the total pressure loss coefficient and distortion coefficient increased by 9.5 and 8.2, respectively, compared to the S-shaped diffuser. The static pressure wall coefficient on the top and bottom surfaces was dropped with the aggressive S-shaped diffuser. © 2018 The Authors, published by EDP Sciences.
date: 2018
publisher: EDP Sciences
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85056760187&doi=10.1051%2fmatecconf%2f201822505004&partnerID=40&md5=e8fb27da58afc240d11a549da9d06915
id_number: 10.1051/matecconf/201822505004
full_text_status: none
publication: MATEC Web of Conferences
volume: 225
refereed: TRUE
issn: 2261236X
citation:   Jessam, R.A. and Al-Kayiem, H.H. and Nasif, M.S.  (2018) Comparative Study on the Performance of S-Shaped Diffuser with Shorten Length.  In: UNSPECIFIED.