eprintid: 9730
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/00/97/30
datestamp: 2023-11-09 16:36:22
lastmod: 2023-11-09 16:36:22
status_changed: 2023-11-09 16:29:41
type: conference_item
metadata_visibility: show
creators_name: Jamaluddin, A.A.
creators_name: Mehat, N.M.
creators_name: Kamaruddin, S.
title: Effect of processing parameters on the shrinkage behaviour of injection moulded polypropylene gear
ispublished: pub
keywords: Gears; Polypropylenes; Shrinkage, Continuous improvements; Optimal processing; Parameters setting; Process parameters; Processing parameters; Quality characteristic; Quality performance; Shrinkage behaviour, Injection molding
note: cited By 2; Conference of International Conference on Advanced Manufacturing and Industry Applications, ICAMIA 2018 ; Conference Date: 15 August 2018 Through 17 August 2018; Conference Code:142246
abstract: The polymer gears are widely used as basic motion transfer elements in many industries. Continuous improvement on the quality performance of polymer gears is very important for their ability to meet present demand. So that, controlling the parameters setting in polymers gears are very importance in order to get the best gears quality. In this study, the influences of injection moulding processing parameters on shrinkage of polypropylene gears was investigated by using Taguchi approach. It was found that the optimal processing parameters for addendum circle shrinkage, dedendum circle shrinkage and tooth thickness shrinkage are A1B1C3D3E1F2G3, A3B1C3D3E3F1G3, and A1B3C3D2E3F2G1 respectively. This results showed that pattern of fluctuation showed either an improvement or reduction in quality characteristics upon the change of process parameters setting. © Published under licence by IOP Publishing Ltd.
date: 2018
publisher: Institute of Physics Publishing
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85057365934&doi=10.1088%2f1757-899X%2f429%2f1%2f012099&partnerID=40&md5=a71788aafcd483a858cef83e47a43a65
id_number: 10.1088/1757-899X/429/1/012099
full_text_status: none
publication: IOP Conference Series: Materials Science and Engineering
volume: 429
number: 1
refereed: TRUE
issn: 17578981
citation:   Jamaluddin, A.A. and Mehat, N.M. and Kamaruddin, S.  (2018) Effect of processing parameters on the shrinkage behaviour of injection moulded polypropylene gear.  In: UNSPECIFIED.