TY  - CONF
TI  - Mineralization of Hazardous Waste Landfill Leachate using Photo-Fenton Process
ID  - scholars9622
KW  - Chemical oxygen demand; Environmental engineering; Image processing; Iron compounds; Leachate treatment
KW  -  COD removal efficiency; Fenton reagents; Hazardous waste landfills; Operating condition; Optimum operating conditions; Oxidizing agents; Photo-fenton oxidations; Photo-Fenton process
KW  -  Oxidation
N2  - This study was conducted to evaluate the COD removal efficiency of Photo-Fenton oxidation process. The reagents used in the Photo-Fenton process are catalyst Fe2+ and H2O2 as oxidizing agent. A 16W UV lamp was used to carry out the experiments. All the experiments were performed in batch mode to investigate the influence of operating conditions viz., Fenton reagents dosage, molar ratio and reaction time. The maximum COD removal observed was 68 under optimum operating conditions. The operating conditions H2O2/Fe2+ molar ratio = 3 and reaction time = 90 minutes were found to optimum. The dosages of Fenton reagents i.e. hydrogen peroxide and Fe2+ were optimum at 0.09 mol/L and 0.03 mol/L respectively. © The Authors, published by EDP Sciences, 2018.
N1  - cited By 9; Conference of 2018 International Conference on Civil and Environmental Engineering, ICCEE 2018 ; Conference Date: 2 October 2018 Through 5 October 2018; Conference Code:143325
AV  - none
VL  - 65
A1  - Singa, P.K.
A1  - Isa, M.H.
A1  - Ho, Y.-C.
A1  - Lim, J.-W.
UR  - https://www.scopus.com/inward/record.uri?eid=2-s2.0-85059192972&doi=10.1051%2fe3sconf%2f20186505012&partnerID=40&md5=9999e643bb881410263cdbb471f605a6
PB  - EDP Sciences
SN  - 22671242
Y1  - 2018///
ER  -