TY  - JOUR
AV  - none
N1  - cited By 32
SP  - 450
TI  - The influence of high temperature on microstructural damage and residual properties of nano-silica-modified (NS-modified) self-consolidating engineering cementitious composites (SC-ECC) using response surface methodology (RSM)
SN  - 09500618
PB  - Elsevier Ltd
EP  - 466
N2  - In this study, nano-silica (NS) has been incorporated into self-consolidating engineered cementitious composites (SC-ECC) for improving materials utilization and performance. Accordingly, the experimental results of the influence of nano-silica (NS) and polyvinyl alcohol (PVA) fibre on the high temperature resistance and microstructure of NS-modified SC-ECC is reported. Standard ECC mix (ECC M45) was adopted to develop mix matrix of composites with PVA fibre at 0.5, 1, 1.5, and 2, while NS at 1, 2, 3, and 4 with the aim of investigating the behaviour of the materials at high temperatures. The NS-modified SC-ECC specimens were considered at various high temperatures up to 400 °C for residual compressive strength assessment using response surface methodology (RSM). While the microstructure of the mix containing 2 each of NS and PVA fibre at a high temperature up to 400 °C were investigated for microstructural properties through mercury intrusion porosimetry (MIP) and scanning electron microscopy (SEM). The incorporation of NS and PVA fibre improved the performance of ECC due to the physiochemical effects and microcracksâ?? bridging ability of NS and PVA fibres, respectively, which was further confirmed by the microstructural studies. The developed prediction model using RSM shows a strong degree of correlation and predictability between the dependent (residual compressive strength) variable and the independent (NS, and PVA) variables after high temperatures exposure. The multi-objective optimization results revealed that the criteria settings at 2 each of NS and PVA fibre achieved a residual compressive strength of about 101 MPa while optimizing the high temperature resistance up to about 293 °C. © 2018
KW  - Compressive strength; Fibers; High temperature engineering; Microcracks; Microstructure; Multiobjective optimization; Scanning electron microscopy; Silica; Surface properties; Temperature control
KW  -  Engineered cementitious composite (ECC); High temperature; Nano Silica; Residual compressive strength; Response surface methodology
KW  -  High temperature effects
ID  - scholars9481
Y1  - 2018///
UR  - https://www.scopus.com/inward/record.uri?eid=2-s2.0-85055257850&doi=10.1016%2fj.conbuildmat.2018.10.114&partnerID=40&md5=54455b178daffb08343feb1b7630e03b
A1  - Mohammed, B.S.
A1  - Achara, B.E.
A1  - Liew, M.S.
JF  - Construction and Building Materials
VL  - 192
ER  -