TY  - CONF
PB  - Institute of Electrical and Electronics Engineers Inc.
SN  - 9781509008452
Y1  - 2017///
A1  - Memon, A.H.
A1  - Bin Ibrahim, T.
A1  - Nallagowden, P.
UR  - https://www.scopus.com/inward/record.uri?eid=2-s2.0-85011985280&doi=10.1109%2fICIAS.2016.7824095&partnerID=40&md5=0cdfdcfbaedd100a852ce30d0f82a7c8
AV  - none
ID  - scholars8951
TI  - Design analysis, optimization and identification of optimum single-phase linear PM generator using different magnet shape for wave energy conversion
KW  - Energy conversion; Finite element method; Hydroelectric generators; Magnets; Optimization; Permanent magnets; Shape optimization; Synchronous generators; Wave energy conversion
KW  -  Design optimization; Electromagnetic characteristic; finite elemt analysis; Linear generators; Linear permanent magnet; shape; Time-stepping finite element method; Wave energy
KW  -  Electric generators
N1  - cited By 4; Conference of 6th International Conference on Intelligent and Advanced Systems, ICIAS 2016 ; Conference Date: 15 August 2016 Through 17 August 2016; Conference Code:125970
N2  - This paper presents the analysis, design optimization and identification of optimum linear permanent magnet (PM) generator for marine wave energy conversion using finite element analysis (FEA). The proposed linear generator is analyzed using different shape of magnet such as; trapezoid, triangular, and parallelogram and compared to the conventional linear PM generator. Eventually, it is identified by FEA that magnet shape augments the characteristics and overall performance of linear PM generator. Time-stepping finite element method (FEM) is employed in order to determine the electromagnetic characteristic of proposed design with all magnet shapes. The optimization has been carried out based on leading or principal dimensional ratios and parameters such as; angle of magnets θ, Φ, and β, ratio of Tmr/Tp, Tp/Tmz and ratio of Rm/Re, which have significant effect on the performance of linear PM generator. The induced-EMF, flux-linkage and magnetic flux density produced in winding and in air-gap, respectively are given and linear PM generator identified by FEA with high performance and superior characteristics is presented with its optimal values for aforementioned principal dimensional ratios and parameters. © 2016 IEEE.
ER  -