eprintid: 8659
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/00/86/59
datestamp: 2023-11-09 16:20:34
lastmod: 2023-11-09 16:20:34
status_changed: 2023-11-09 16:13:12
type: conference_item
metadata_visibility: show
creators_name: Sabet, M.
creators_name: Soleimani, H.
title: The impact of electron beam irradiation on Low density polyethylene and Ethylene vinyl acetate
ispublished: pub
keywords: Capillary flow; Electrons; Ethylene; Hardness; Irradiation; Nanostructured materials; Polyethylenes; Tensile strength; Thermoplastic elastomers, Amorphous regions; Degree of cross-linking; Electron beam irradiation; Electron beam radiation; Ethylene vinyl acetates; Low density polyethylene(LDPE); Strength and elongations; Wire and cable, Electron beams
note: cited By 15; Conference of 2017 5th International Conference on Nanomaterials and Materials Engineering, ICNME 2017 ; Conference Date: 1 April 2017 Through 3 April 2017; Conference Code:127992
abstract: Improvement of measured gel content, hardness, tensile strength and elongation at break of Ethylene vinyl acetate (EVA) have confirmed positive effect of electron beam irradiation on EVA. Results obtained from both gel content tests show that degree of cross-linking in amorphous regions is dependent on dose. A significant improvement in tensile strength of neat EVA samples is obtained upon electron-beam radiation up to 210 kGy. Similarly, hardness properties of Low-density polyethylene (LDPE) improvewith increasing electron beam irradiation. This article deals with the impacts of electron beam (EB) irradiation on the properties of LDPE and Ethylene-Vinyl Acetate (EVA) as the two common based formulations for wire and cable applications. © Published under licence by IOP Publishing Ltd.
date: 2017
publisher: Institute of Physics Publishing
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85020313714&doi=10.1088%2f1757-899X%2f204%2f1%2f012005&partnerID=40&md5=005b90fe505ad7bd9552a62ff1c96f1d
id_number: 10.1088/1757-899X/204/1/012005
full_text_status: none
publication: IOP Conference Series: Materials Science and Engineering
volume: 204
number: 1
refereed: TRUE
issn: 17578981
citation:   Sabet, M. and Soleimani, H.  (2017) The impact of electron beam irradiation on Low density polyethylene and Ethylene vinyl acetate.  In: UNSPECIFIED.