eprintid: 8627
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/00/86/27
datestamp: 2023-11-09 16:20:32
lastmod: 2023-11-09 16:20:32
status_changed: 2023-11-09 16:13:07
type: article
metadata_visibility: show
creators_name: Dhuban, S.B.
creators_name: Karuppanan, S.
creators_name: Mengal, A.N.
creators_name: Patil, S.S.
title: Effect of fiber orientation and ply stacking sequence on buckling behaviour of basalt-carbon hybrid composite laminates
ispublished: pub
keywords: Basalt; Buckling; Fibers; Finite element method; Laminates; Laminating; Reinforcement, Basalt fiber; Carbon fiber reinforced; Composite laminated plates; Critical buckling loads; Hybrid composite laminate; Hybrid composites; Non-linear FEA; Non-linear finite-element analysis, Laminated composites
note: cited By 15
abstract: The aim of this study is to investigate the effect of fiber orientation and ply stacking sequence of basalt-carbon hybrid composite laminates on the critical buckling strength, experimentally and by using nonlinear finite element analysis. The composite laminated plates are simply supported and subjected to axial compression load. Nonlinear FEA results using ANSYS have good agreement with the experimental results. FEA results showed that the outer layers have the most significant influence on the buckling strength of the composite laminated material. Furthermore, placing carbon fiber reinforced layers in the outer surface of the basalt-carbon/epoxy hybrid laminates results in significant increase in the critical buckling load compared to placing basalt fiber reinforced layers in the outer surface. It is also concluded that 0 2 C/0B/+45B S laminate is the best combination of the hybrid stacking sequences as far as buckling strength is concerned. © 2017, National Institute of Science Communication and Information Resources (NISCAIR). All rights reserved.
date: 2017
publisher: National Institute of Science Communication and Information Resources (NISCAIR)
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85032743971&partnerID=40&md5=192f4edcc0c70b6616a31fa0a34cb9c3
full_text_status: none
publication: Indian Journal of Engineering and Materials Sciences
volume: 24
number: 3
pagerange: 187-193
refereed: TRUE
issn: 09714588
citation:   Dhuban, S.B. and Karuppanan, S. and Mengal, A.N. and Patil, S.S.  (2017) Effect of fiber orientation and ply stacking sequence on buckling behaviour of basalt-carbon hybrid composite laminates.  Indian Journal of Engineering and Materials Sciences, 24 (3).  pp. 187-193.  ISSN 09714588