TY  - JOUR
N1  - cited By 15
TI  - Effect of fiber orientation and ply stacking sequence on buckling behaviour of basalt-carbon hybrid composite laminates
SP  - 187
AV  - none
EP  - 193
PB  - National Institute of Science Communication and Information Resources (NISCAIR)
SN  - 09714588
N2  - The aim of this study is to investigate the effect of fiber orientation and ply stacking sequence of basalt-carbon hybrid composite laminates on the critical buckling strength, experimentally and by using nonlinear finite element analysis. The composite laminated plates are simply supported and subjected to axial compression load. Nonlinear FEA results using ANSYS have good agreement with the experimental results. FEA results showed that the outer layers have the most significant influence on the buckling strength of the composite laminated material. Furthermore, placing carbon fiber reinforced layers in the outer surface of the basalt-carbon/epoxy hybrid laminates results in significant increase in the critical buckling load compared to placing basalt fiber reinforced layers in the outer surface. It is also concluded that 0 2 C/0B/+45B S laminate is the best combination of the hybrid stacking sequences as far as buckling strength is concerned. © 2017, National Institute of Science Communication and Information Resources (NISCAIR). All rights reserved.
IS  - 3
ID  - scholars8627
KW  - Basalt; Buckling; Fibers; Finite element method; Laminates; Laminating; Reinforcement
KW  -  Basalt fiber; Carbon fiber reinforced; Composite laminated plates; Critical buckling loads; Hybrid composite laminate; Hybrid composites; Non-linear FEA; Non-linear finite-element analysis
KW  -  Laminated composites
JF  - Indian Journal of Engineering and Materials Sciences
A1  - Dhuban, S.B.
A1  - Karuppanan, S.
A1  - Mengal, A.N.
A1  - Patil, S.S.
UR  - https://www.scopus.com/inward/record.uri?eid=2-s2.0-85032743971&partnerID=40&md5=192f4edcc0c70b6616a31fa0a34cb9c3
VL  - 24
Y1  - 2017///
ER  -