eprintid: 8578 rev_number: 2 eprint_status: archive userid: 1 dir: disk0/00/00/85/78 datestamp: 2023-11-09 16:20:29 lastmod: 2023-11-09 16:20:29 status_changed: 2023-11-09 16:12:59 type: conference_item metadata_visibility: show creators_name: Zahari, M.K. creators_name: Ahmad, B.H. creators_name: Wong, P.W. creators_name: Shairi, N.A. title: Switchable bandstop to bandpass filter using parallel-coupled resonator ispublished: pub keywords: Crystal resonators; Microwave filters; Notch filters; Resonators; Semiconductor diodes, absorptive; Band pass; Band-stop; Low-loss; Switchable filters, Bandpass filters note: cited By 6; Conference of 2017 IEEE Asia Pacific Microwave Conference, APMC 2017 ; Conference Date: 13 November 2017 Through 16 November 2017; Conference Code:134147 abstract: A new prototype of switchable bandstop to bandpass filter was designed and fabricated by using parallel-coupled lossy resonator. The lossy resonator topology was used to partially compensate for the losses. The fundamentals of having two lossy Q resonator structures are that it exhibits a bandpass filter, where the parallel-coupled resonator is disconnected with the λ/4 wavelength. PIN diodes are used to change the filter's response. In the experiments, the filter exhibited a high-Q bandstop response when the PIN diodes were switched 'ON' with an operating frequency of 2.4GHz, an attenuation of 75dB and return loss S11 > 20dB. The lossy bandpass filter was produced when the PIN diodes were switched 'OFF'. The theoretical analysis together with the fabrication results were presented in this paper. © 2017 IEEE. date: 2017 publisher: Institute of Electrical and Electronics Engineers Inc. official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85044742292&doi=10.1109%2fAPMC.2017.8251494&partnerID=40&md5=cc431ed4e075e78747dc7ab0e8ec86a8 id_number: 10.1109/APMC.2017.8251494 full_text_status: none publication: Asia-Pacific Microwave Conference Proceedings, APMC pagerange: 513-516 refereed: TRUE isbn: 9781538606407 citation: Zahari, M.K. and Ahmad, B.H. and Wong, P.W. and Shairi, N.A. (2017) Switchable bandstop to bandpass filter using parallel-coupled resonator. In: UNSPECIFIED.