eprintid: 8343 rev_number: 2 eprint_status: archive userid: 1 dir: disk0/00/00/83/43 datestamp: 2023-11-09 16:20:14 lastmod: 2023-11-09 16:20:14 status_changed: 2023-11-09 16:12:25 type: article metadata_visibility: show creators_name: Shoaib, M. creators_name: Hamid, N.H. creators_name: Tariq Jan, M. creators_name: Zain Ali, N.B. title: Effects of Crack Faults on the Dynamics of Piezoelectric Cantilever-Based MEMS Sensor ispublished: pub keywords: Analytical models; Cracks; Electromechanical devices; Fault detection; Finite element method; Linear systems; MEMS; Microelectromechanical devices; Nanocantilevers; Natural frequencies; Piezoelectricity; Resonance; Sensors; Silicon; Surface defects, cantilever; COMSOL; Crack faults; Micromechanical device; Resonance frequencies; Simulink; Structural beams, Crack detection note: cited By 5 abstract: The presence of cracks on the surface of MEMS microelectromechanical system (MEMS) devices affects their functional parameter, such as resonance frequency. Overtime, these cracks may cause the devices' failure. Therefore, it is important to identify the symptoms of the cracks presence so that the affected devices can be removed/bin-out before delivering to the customers thus avoiding failure during applications of these devices. In this paper, we present a predictive and quantitative fault modeling approach using the linear time invariant (LTI) technique for a piezoelectric cantilever-based sensor. The analytical fault model is developed by correlating single edge, double edge, and surface cracks with the resonance frequency of the cantilever. The Simulink is utilized to design the LTI-based faulty device by integrating the dynamic equations associated to actuation and sensing mechanisms of the device under study. The model is validated by comparing it with the finite element method model containing the same design parameters, using the COMSOL Multiphysics. We observed that the presence of cracks at any location on the surface of the device stimulates the amplitude that causes decrease in its resonance frequency. The increase in the amplitude of vibration due to the presence of cracks is electrically sensed by the piezoresistive mechanism. Finally, the fault detection methodology is presented by using the Stateflow technique. We found that the proposed techniques can be significant to study the faulty behavior of the MEMS devices. © 2001-2012 IEEE. date: 2017 publisher: Institute of Electrical and Electronics Engineers Inc. official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85028954783&doi=10.1109%2fJSEN.2017.2737044&partnerID=40&md5=f8a47beb0e5c845b447248e0d2890e62 id_number: 10.1109/JSEN.2017.2737044 full_text_status: none publication: IEEE Sensors Journal volume: 17 number: 19 pagerange: 6279-6294 refereed: TRUE issn: 1530437X citation: Shoaib, M. and Hamid, N.H. and Tariq Jan, M. and Zain Ali, N.B. (2017) Effects of Crack Faults on the Dynamics of Piezoelectric Cantilever-Based MEMS Sensor. IEEE Sensors Journal, 17 (19). pp. 6279-6294. ISSN 1530437X