eprintid: 8267
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/00/82/67
datestamp: 2023-11-09 16:20:09
lastmod: 2023-11-09 16:20:09
status_changed: 2023-11-09 16:12:13
type: conference_item
metadata_visibility: show
creators_name: Mohd Sohor, M.A.H.
creators_name: Mustapha, M.
creators_name: Mamat, O.
title: Analysis of contributing factors for synthesizing silicon carbide using Taguchi's approach
ispublished: pub
keywords: Analysis of variance (ANOVA); Carbothermal reduction; Heating rate; Mechanical alloying; Milling (machining); Silica; Silicon carbide; Silicon compounds; Silicon oxides, Amorphous SiO2; Contributing factor; Mechanical milling time; Orthogonal design; SiC formation; Silicon carbides (SiC), Amorphous silicon
note: cited By 1; Conference of 2017 UTP-UMP Symposium on Energy Systems, SES 2017 ; Conference Date: 26 September 2017 Through 27 September 2017; Conference Code:131396
abstract: This study concerns the carbothermal reduction of milled amorphous silicon dioxide (SiO2) to produce silicon carbide (SiC) using Taguchi's approach. The L9(34) orthogonal design matrix was selected involving four operation specifications; temperature, mechanical milling time, heating rate and time on amorphous SiO2 under carbothermal reduction. The responses were then analysed and evaluated by Analysis of Variance (ANOVA) technique. SiC yield was optimized to the highest when synthesized using amorphous SiO2 with the highest-level setting for temperature (1450°C), milling duration (100 minutes), time (180 minutes) together with the minimum heating rate of 5°C/min and only SiC formation was observed at T1400°C.
date: 2017
publisher: EDP Sciences
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85033217103&doi=10.1051%2fmatecconf%2f201713103012&partnerID=40&md5=8692eeae48a33996582d55f48eba41e9
id_number: 10.1051/matecconf/201713103012
full_text_status: none
publication: MATEC Web of Conferences
volume: 131
refereed: TRUE
issn: 2261236X
citation:   Mohd Sohor, M.A.H. and Mustapha, M. and Mamat, O.  (2017) Analysis of contributing factors for synthesizing silicon carbide using Taguchi's approach.  In: UNSPECIFIED.