eprintid: 7964
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/00/79/64
datestamp: 2023-11-09 16:19:48
lastmod: 2023-11-09 16:19:48
status_changed: 2023-11-09 16:10:50
type: article
metadata_visibility: show
creators_name: Chuah, L.F.
creators_name: Yusup, S.
creators_name: Abd Aziz, A.R.
creators_name: Bokhari, A.
creators_name: Abdullah, M.Z.
title: Cleaner production of methyl ester using waste cooking oil derived from palm olein using a hydrodynamic cavitation reactor
ispublished: pub
keywords: Cavitation; Energy efficiency; Esters; Fluid dynamics; Greenhouse gases; Hydrodynamics; Mass transfer; Orifices; Palm oil; Pollution control; Production; Transesterification, Environmental-friendly; Hydrodynamic cavitations; Mass transfer resistances; Methyl esters; Optimised conditions; Transesterification process; Transesterification reaction; Waste cooking oil, Oils and fats
note: cited By 116
abstract: Methyl ester contributes to environmental protection as it is biodegradable, renewable, non-toxic, produces less sulphur oxides emissions and greenhouse gases. The present work highlights the potential of hydrodynamic cavitation for the methyl ester production from waste cooking oil. The transesterification process was conducted under optimised conditions, such as oil to methanol molar ratio of 1:6 in the presence of 1 wt. potassium hydroxide as alkali catalyst at 60 °C. Four newly designed orifice plate geometries induced cavities assisted by a double diaphragm pump in a pilot hydrodynamic cavitation reactor were investigated. It is shown that the high turbulence generated by the cavitating bubbles were effective in reducing the mass transfer resistance between immiscible reactants during the transesterification reaction due to increased interfacial area. At 2 bar inlet pressure, orifice plate with 21 holes of 1 mm diameter resulted in 8 fold higher yield efficiency and 6 fold lower reaction time compared to mechanical stirring. This makes the process more environmental friendly by using hydrodynamic cavitation. In conclusion, waste cooking oil methyl ester produced via hydrodynamic cavitation proved to be energy efficiency and time saving. The properties of the produced methyl ester met both EN 14214 and ASTM D 6751 standards. © 2015 Elsevier Ltd. All rights reserved.
date: 2016
publisher: Elsevier Ltd
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-84959509281&doi=10.1016%2fj.jclepro.2015.06.112&partnerID=40&md5=4f6907a3ae641314e69ecf752ea50e81
id_number: 10.1016/j.jclepro.2015.06.112
full_text_status: none
publication: Journal of Cleaner Production
volume: 112
pagerange: 4505-4514
refereed: TRUE
issn: 09596526
citation:   Chuah, L.F. and Yusup, S. and Abd Aziz, A.R. and Bokhari, A. and Abdullah, M.Z.  (2016) Cleaner production of methyl ester using waste cooking oil derived from palm olein using a hydrodynamic cavitation reactor.  Journal of Cleaner Production, 112.  pp. 4505-4514.  ISSN 09596526