eprintid: 7708
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/00/77/08
datestamp: 2023-11-09 16:19:31
lastmod: 2023-11-09 16:19:31
status_changed: 2023-11-09 16:10:13
type: article
metadata_visibility: show
creators_name: Ismail, A.
creators_name: Awang, M.
creators_name: Rojan, M.A.
creators_name: Samsudin, S.H.
title: The characteristic of temperature curves for friction stir welding of aluminium alloy 6063-T6 pipe during tool plunging stage
ispublished: pub
note: cited By 11
abstract: Friction stir welding (FSW) is originally designed to cater to metals which are difficult to weld such as aluminium. This solid state joining process utilizes frictional heat produced by the high rotating tool to soften and stir (joint) these adjoining sections together without utilizing filler metal or shielding gas. The present study analyzes the characteristic temperature curves during the plunging stage of this high rotating tool. About four (4) points of selected location on both advancing and retreating side were measured by K-type thermocouples and recorded using a NI Signal Express on a laptop. It was found that the advancing side gave higher temperature curves compared to the retreating side. © 2006-2016 Asian Research Publishing Network (ARPN).
date: 2016
publisher: Asian Research Publishing Network
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85000843893&partnerID=40&md5=76afebc1669f775e3cedbe4a29e11ea8
full_text_status: none
publication: ARPN Journal of Engineering and Applied Sciences
volume: 11
number: 1
pagerange: 277-280
refereed: TRUE
issn: 18196608
citation:   Ismail, A. and Awang, M. and Rojan, M.A. and Samsudin, S.H.  (2016) The characteristic of temperature curves for friction stir welding of aluminium alloy 6063-T6 pipe during tool plunging stage.  ARPN Journal of Engineering and Applied Sciences, 11 (1).  pp. 277-280.  ISSN 18196608