eprintid: 7634
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/00/76/34
datestamp: 2023-11-09 16:19:27
lastmod: 2023-11-09 16:19:27
status_changed: 2023-11-09 16:09:57
type: article
metadata_visibility: show
creators_name: Sulaiman, S.A.
creators_name: Inayat, M.
creators_name: Basri, H.
creators_name: Guangul, F.M.
creators_name: Atnaw, S.M.
title: Effect of blending ratio on temperature profile and syngas composition of woody biomass co-gasification
ispublished: pub
note: cited By 27
abstract: Co-gasification of biomass is beneficial as only relying on one type of biomass causes interruption in gasification if the feedstock supply is disrupted for any reason. Therefore, co-gasification of different biomass materials is a potential way to overcome the problem. In this work, co-gasification of wood chips (WC) and coconut fronds (CF) was carried out in a downdraft gasifier at 400 L/min airflow rate. Three blends of WC/CF of 70:30, 50:50 and 30:70 ratios were considered with a maximum particle size of 2.5-3.0 cm. The aim of this study was to investigate the effect of blending ratio on the temperature profile and syngas composition produced by the co-gasification of WC/CF blended feedstock. The results show that the temperature profile and syngas composition of 70:30 WC/CF blend was comparatively better. The average syngas composition of 70:30 WC/CF blend during steady state co-gasification operation was 20, 12 and 3 for CO, H2 and CH4 respectively. Similarly, the average syngas composition of 50:50 WC/CF blend was around 21, 8 and 0.7 for CO, H2, and CH4 respectively. While the 30:70 WC/CF blend encountered with bridging problem due to fibrous and low density CF. No more than 50 of fibrous and low density feedstock like CF is recommended in a blend for stable and progressive co-gasification. © Universiti Malaysia Pahang.
date: 2016
publisher: Universiti Malaysia Pahang
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85008704841&doi=10.15282%2fjmes.10.2.2016.20.0204&partnerID=40&md5=c0d8a470d6a0a98b8ea87a867c3e6132
id_number: 10.15282/jmes.10.2.2016.20.0204
full_text_status: none
publication: Journal of Mechanical Engineering and Sciences
volume: 10
number: 2
pagerange: 2176-2186
refereed: TRUE
issn: 22894659
citation:   Sulaiman, S.A. and Inayat, M. and Basri, H. and Guangul, F.M. and Atnaw, S.M.  (2016) Effect of blending ratio on temperature profile and syngas composition of woody biomass co-gasification.  Journal of Mechanical Engineering and Sciences, 10 (2).  pp. 2176-2186.  ISSN 22894659