eprintid: 7450
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/00/74/50
datestamp: 2023-11-09 16:19:15
lastmod: 2023-11-09 16:19:15
status_changed: 2023-11-09 16:09:24
type: conference_item
metadata_visibility: show
creators_name: Ramli, R.M.
creators_name: Kait, C.F.
creators_name: Omar, A.A.
title: Remediation of DIPA Contaminated Wastewater Using Visible Light Active Bimetallic Cu-Fe/TiO2 Photocatalyst
ispublished: pub
keywords: Absorption; Characterization; Chemical oxygen demand; Energy gap; Iron compounds; Light; Photocatalysts; Photodegradation; Process engineering; Rate constants; Titanium dioxide; Transmission electron microscopy; Wastewater treatment; Water pollution, Bimetallic photocatalysts; Contaminated wastewater; Diffuse reflectance-UV-vis; Diisopropanolamine; Photo catalytic degradation; Pseudo-first order kinetics; Visible light; Wet impregnation method, Water treatment
note: cited By 4; Conference of 4th International Conference on Process Engineering and Advanced Materials, ICPEAM 2016 ; Conference Date: 15 August 2016 Through 17 August 2016; Conference Code:131138
abstract: Alkanolamine is widely applied in industry usually for gas treatment process to remove acid gases prior to utilization. Though the absorbent is recycled through the system, some carry over into water stream is unavoidable. Due to high solubility and toxicity of the absorbent, simple removal process or conventional wastewater treatments are inefficient to treat the contaminated water. The photocatalytic degradation of organic compounds were reported to be efficient for treatment or persistent pollutant. In this paper, the synthesized TiO2 was modified with Cu, Fe or Cu-Fe via wet impregnation method. Characterization of the prepared photocatalysts were conducted using BET analyzer, X-ray diffractometer, transmission electron microscope, diffuse reflectance UV-Vis spectrophotometer, and point of zero charge determination. The band gap of the photocatalysts was reduced to as low as 2.55 eV (1.8Cu-0.2Fe/TiO2) compared to bare TiO2 with a band gap of 3.11 eV. The performance of the photocatalysts for photodegradation of diisopropanolamine (DIPA) was studied using a batch glass reactor under simulated sunlight. The bimetallic photocatalyst 1.8Cu-0.2Fe/TiO2 displayed the highest chemical oxygen demand (COD) and DIPA removals of 67 and 92, respectively. Based on the photocatalytic degradation data, all the photocatalysts were found to follow pseudo-first order kinetic with 1.8Cu-0.2Fe/TiO2 giving the highest apparent rate constant, kapp = 16.5�10-3 min-1. © 2016 The Authors. Published by Elsevier Ltd.
date: 2016
publisher: Elsevier Ltd
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85013961699&doi=10.1016%2fj.proeng.2016.06.540&partnerID=40&md5=8efbea1c889ac2fd7ee25e93ba183ab5
id_number: 10.1016/j.proeng.2016.06.540
full_text_status: none
publication: Procedia Engineering
volume: 148
pagerange: 508-515
refereed: TRUE
issn: 18777058
citation:   Ramli, R.M. and Kait, C.F. and Omar, A.A.  (2016) Remediation of DIPA Contaminated Wastewater Using Visible Light Active Bimetallic Cu-Fe/TiO2 Photocatalyst.  In: UNSPECIFIED.