eprintid: 7359
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/00/73/59
datestamp: 2023-11-09 16:19:10
lastmod: 2023-11-09 16:19:10
status_changed: 2023-11-09 16:09:10
type: conference_item
metadata_visibility: show
creators_name: Hassan, S.M.
creators_name: Ibrahim, R.
creators_name: Bingi, K.
creators_name: Chung, T.D.
creators_name: Saad, N.
title: Application of Wireless Technology for Control: A WirelessHART Perspective
ispublished: pub
keywords: Environmental conditions; Gateway; Industrial sector; Running-in; Three categories; Wired connection; Wireless control; Wireless standards; Wireless technologies; WirelessHART, Process monitoring
note: cited By 33; Conference of IEEE International Symposium on Robotics and Intelligent Sensors, IRIS 2016 ; Conference Date: 17 December 2016 Through 20 December 2016; Conference Code:134518
abstract: Process monitoring and automation in the industrial sector are hitherto done over wired connection between devices. It is evident that the amount of wires required increased proportionally to the complexity of the industry and their installation is time consuming. The wires used in the industry must withstand the harsh environmental conditions, hence expensive to install and maintain. In the event of loss of connection due to accident or any other reason, the cost incurred as a result of the downtime is high. The highlighted problems necessitated the need for an open, interoperable wireless standard like WirelessHART that can overcome these problems. Three categories of applications running in any process plant with increment of criticality are for monitoring, control and safety. The current application of wireless technology including WirelessHART in the industry so far is limited to monitoring and some attempts are being made to apply it for control. This paper examines the extent to which WirelessHART technology is applied especially for the purpose of control. © 2017 The Authors.
date: 2016
publisher: Elsevier B.V.
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85016090685&doi=10.1016%2fj.procs.2017.01.217&partnerID=40&md5=de05005c9c73826a73e4c1653c26dafe
id_number: 10.1016/j.procs.2017.01.217
full_text_status: none
publication: Procedia Computer Science
volume: 105
pagerange: 240-247
refereed: TRUE
issn: 18770509
citation:   Hassan, S.M. and Ibrahim, R. and Bingi, K. and Chung, T.D. and Saad, N.  (2016) Application of Wireless Technology for Control: A WirelessHART Perspective.  In: UNSPECIFIED.