eprintid: 7126
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/00/71/26
datestamp: 2023-11-09 16:18:55
lastmod: 2023-11-09 16:18:55
status_changed: 2023-11-09 16:08:32
type: conference_item
metadata_visibility: show
creators_name: Mahmod, M.F.
creators_name: Bakar, E.A.
creators_name: Othman, A.R.
title: Defect Detection of Fiberglass Composite Laminates (FGCL) with Ultrasonic A-Scan Signal Measurement
ispublished: pub
keywords: Fracture mechanics; Glass fibers; Laminated composites; Manufacture; Signal detection; Single crystals; Surface defects; Transducers; Ultrasonic applications; Ultrasonic testing, Fiberglass composites; High specific strength; Material defect detection; Maximum thickness; Signal interpretation; Specimen surfaces; Structural failure; Ultrasonic parameters, Defects
note: cited By 1; Conference of Joint Conference of 2nd International Manufacturing Engineering Conference, iMEC 2015 and 3rd Asia-Pacific Conference on Manufacturing Systems, APCOMS 2015 ; Conference Date: 12 November 2015 Through 14 November 2015; Conference Code:120072
abstract: Fiberglass composite laminates are widely used in many industries, due to its advantages of high specific strength and high specific modulus. Invisible defect such as delamination and inclusion may cause composite structural failure. Therefore, several research on ultrasonic testing for composite material defect detection have been done for the past few years. However, improper parameter setup may lead to significant error to determine the behavior of defects. In this paper, the intensive study on defect detection with ultrasonic single crystal immersion transducer has been conducted. In general, the defects detection thru acquired signal is determine the behavior of defects through the certain ultrasonic parameter setup such as sound velocity, pulse width, gain, sampling rate and transducer distance with specimen surface. Furthermore, an A-scan signal interpretation for FGCL defect detection is demonstrated and illustrated. This research is focusing on for FGCL with maximum thickness up to 10 mm in ambient temperature. The result shows an appropriate ultrasonic parameter will result better signal interpretation analysis. © Published under licence by IOP Publishing Ltd.
date: 2016
publisher: Institute of Physics Publishing
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-84973150446&doi=10.1088%2f1757-899X%2f114%2f1%2f012106&partnerID=40&md5=c556c4ddbea86d1baf0722a0b16f8b28
id_number: 10.1088/1757-899X/114/1/012106
full_text_status: none
publication: IOP Conference Series: Materials Science and Engineering
volume: 114
number: 1
refereed: TRUE
issn: 17578981
citation:   Mahmod, M.F. and Bakar, E.A. and Othman, A.R.  (2016) Defect Detection of Fiberglass Composite Laminates (FGCL) with Ultrasonic A-Scan Signal Measurement.  In: UNSPECIFIED.