eprintid: 6734
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/00/67/34
datestamp: 2023-11-09 16:18:31
lastmod: 2023-11-09 16:18:31
status_changed: 2023-11-09 16:07:31
type: conference_item
metadata_visibility: show
creators_name: Ahmed, A.A.
creators_name: Saaid, I.M.
creators_name: Akhir, N.A.M.
creators_name: Rashedi, M.
title: Influence of various cation valence, salinity, pH and temperature on bentonite swelling behaviour
ispublished: pub
note: cited By 9; Conference of 1st International Conference on Advanced Science, Engineering and Technology, ICASET 2015 ; Conference Date: 21 December 2015 Through 22 December 2015; Conference Code:124537
abstract: A major issue for the oil and gas industry is the producing of high water from many fields due to massive water injection. Reducing the water production while improving oil recovery from these fields is a major challenge. Polymer gel has been widely used to shut off water-producing zones, but it is not suitable for high temperature reservoirs (> 100 °C). The aims of the present study were to investigate bentonite particles swelling properties and influence of specific ion type (monovalent/divalent) present in water in swelling behaviour, and hence their potential for plugging high water production zones. In this study series of free swelling tests were conducted on bentonite with varying salinity, pH and temperature. The study found that cation valence, salinities and pH had significant impacts on swelling performance of bentonite particles. Bentonite changed from highly swelled material to aggregate in high salinity. Test results showed that the free swelling of bentonite decreased with the increase of cation valence and concentration. Monovalent cations concentration greatly influenced the swelling volume of bentonite, whereas the influence of the increasing concentration of divalent cations was marginal. As the radius of the hydrated ionic increased, the free swell of bentonite in same valance cation solutions raised. Moderate swelling changes were obtained when the solution pH increased. Meanwhile, increases in temperature will increase the swelling of bentonite due to growth in frequency of interlayer cations and water molecules. Bentonite particles swelling could be controlled and inhibited by varying solution salinities and/or altering interlayer exchangeable cations. Thus, bentonite particles swelling will be triggered by low salinity, after it's been injected and mixed with lower reservoir water salinity. © 2016 Author(s).
date: 2016
publisher: American Institute of Physics Inc.
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-84995493894&doi=10.1063%2f1.4965087&partnerID=40&md5=02f3115f2a47a093c9a54f90cbb31779
id_number: 10.1063/1.4965087
full_text_status: none
publication: AIP Conference Proceedings
volume: 1774
refereed: TRUE
isbn: 9780735414327
issn: 0094243X
citation:   Ahmed, A.A. and Saaid, I.M. and Akhir, N.A.M. and Rashedi, M.  (2016) Influence of various cation valence, salinity, pH and temperature on bentonite swelling behaviour.  In: UNSPECIFIED.